Banana Pi BPI-W3

Introduction

Banana Pi BPI-W3 with Rockchip RK3588 chip design

BPI-RK3588 Core board and development Kit Gold finger interface core board

BPI-RK3588 Core board and development Kit

BPI-RK3588 Core board and development Kit Stamp hole Core board

BPI-RK3588 BPI-RK3588 Core board and development Kit Stamp hole Core board and development Kit

Banana Pi BPI-R2 Pro Rockchip RK3568 design

The Banana Pi BPI-W3 single board computer is designed and developed by bananapi team for professional and enterprise users, powered by Rockchip RK3588 SoC quad ARM Cortex-A76 and quad Cortex-A55 consists of an eight-core CPU processor with dynamic frequency scaling up to 2.4GHz. Embedded high -performance 3D and 2D image acceleration module, AI accelerator NPU with a built -in 6 TOPS computing power.

BPI-W3 up to 32GB 64bit LPDDR4X ram, up to 8K@60 HDMI OUT, HDMI IN, MIPI DSI, MIPI CSI, 3.5mm jack with mic, USB Port, 2.5GbE LAN, PCIe 3.0 x4, PCIe 2.0x2, 40-pin expansion header, RTC,POE,SD card, DC power，typec.

Key Features

• Rockchip RK3588 quad ARM Cortex-A76 and quad Cortex-A55 consists of an eight-core CPU processor
• ARM Mali-G610 MP4,
• NPU for AI : 6Tops@INT8
• 8G RAM and 32G eMMC flash onbord
• 2.5Gbps Ethernet
• support HDMI in and HDMI out

Getting Start

Getting Started with BPI-W3

Hardware

Hardware interface

Hardware spec

SoC	RockChip RK3588
CPU	quad ARM Cortex-A76 and quad Cortex-A55 consists of an eight-core CPU processor
GPU	ARM Mali-G610 MP4,support OpenGL ES 1.1/2.0/3.2，OpenCL 2.2，Vulkan 1.1 Embedded high-performance 2D acceleration hardware
NPU	6Tops@INT8 ，
Video decode	Caffe/TensorFlow/TFLite/ONNX PyTorch/Keras/Darknet mainstream architecture model of a key transformation VPU support 8 k 60 FPS h. 265 / AVS2 Profile0 / VP9 video decoding
Video encode	Supports 8K 30FPS H.265/H.264 video encoding
RAM	8GB LPDDR4
eMMC flash	32GB
Onboard Network	2x 10/100/1000Mbps Ethernet
HDMI	2 HDMI Out and 1 HDMI in
GPIO	40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
SATA	1 SATA hardisk interface
System	Android 12.0 ,Linux support
Power	current and voltage 12V/2A
operating temperature	0℃ ～ 80℃（Measurement can reach -20 degrees to 85 degrees）
size	148mm * 101mm

40 PIN GPIO

GPIO number	Function8	Function7	Function6	Function5	Function4	Function3	Function2	Function1	Pin#
								+3.3V	1
139			I2S1_SDO2_M0	I2C7_SDA_M3	UART8_CTSN_M0	PWM15_IR_M1	CAN1_TX_M1	GPIO4_B3	3
138			I2S1_SDO1_M0	I2C7_SCL_M3	UART8_RTSN_M0	PWM14_M1	CAN1_RX_M1	GPIO4_B2	5
115		SPI1_CS1_M1		I2C8_SDA_M4	UART7_CTSN_M1	PWM15_IR_M0		GPIO3_C3	7
								GND	9
113		SPI1_CLK_M1			UART7_RX_M1			GPIO3_C1	11
111		SPI1_MOSI_M1		I2C3_SCL_M1				GPIO3_B7	13
112		SPI1_MISO_M1		I2C3_SDA_M1	UART7_TX_M1			GPIO3_C0	15
								+3.3V	17
42		SPI0_MOSI_M2			UART4_RX_M2			GPIO1_B2	19
41		SPI0_MISO_M2						GPIO1_B1	21
43		SPI0_CLK_M2			UART4_TX_M2			GPIO1_B3	23
								GND	25
150		SPI3_CLK_M0		I2C0_SDA_M1		PWM7_IR_M3		GPIO4_C6	27
63					UART1_CTSN_M1	PWM15_IR_M3		GPIO1_D7	29
47	SPDIF_TX_M0				UART1_RX_M1	PWM13_M2		GPIO1_B7	31
103						PWM8_M0		GPIO3_A7	33
110			I2S2_LRCK_M1		UART3_RX_M1	PWM13_M0	CAN1_TX_M0	GPIO3_B6	35
									37
								GND	39

Pin#	Function1	Function2	Function3	Function4	Function5	Function6	Function7	Function8	GPIO number
2	+5.0V
4	+5.0V
6	GND
8	GPIO0_B5			UART2_TX_M0	I2C1_SCL_M0	I2S1_MCLK_M1			13
10	GPIO0_B6			UART2_RX_M0	I2C1_SDA_M0	I2S1_SCLK_M1			14
12	GPIO3_B5	CAN1_RX_M0	PWM12_M0	UART3_TX_M1		I2S2_SCLK_M1			109
14	GND
16	GPIO3_A4								100
18	GPIO4_C4		PWM5_M2				SPI3_MISO_M0		148
20	GND
22	SARADC_IN4
24	GPIO1_B4			UART7_RX_M2			SPI0_CS0_M2		44
26	GPIO1_B5			UART7_TX_M2			SPI0_CS1_M2		45
28	GPIO4_C5		PWM6_M2		I2C0_SCL_M1		SPI3_MOSI_M0		149
30	GND
32	GPIO3_C2		PWM14_M0	UART7_RTSN_M1	I2C8_SCL_M4		SPI1_CS0_M1		114
34	GND
36	GPIO3_B1		PWM2_M1	UART2_TX_M2					105
38	GPIO3_B2		PWM3_IR_M1	UART2_RX_M2		I2S2_SDI_M1			106
40	GPIO3_B3			UART2_RTSN		I2S2_SDO_M1			107

Resources

Source code

linux-5.10.110 kernel BSP Source code on github ：https://github.com/BPI-SINOVOIP/BPI-W3-BSP