Difference between revisions of "BPI-EAI80 Compiling Steps"
| Line 29: | Line 29: | ||
[[File:Comple_4.jpg]] | [[File:Comple_4.jpg]] | ||
| − | + | == Burning ugelis.bin (after compiling) to EAI80 flash== | |
| − | :: | + | Step 1: |
| − | : | + | ::Turn on a terminal, seek ugelis file under lcd, go to below path: |
| + | ::github/BPI-EAI80-bsp/ugelis_example/example/driver_example/lcd/build/ugeliss | ||
| + | [[File:Burn_6.jpg]] | ||
| + | Step 2: | ||
| + | ::Turn on 2nd terminal, go to below path: github/BPI-EAI80-bsp/ugelis/tools/gree_tool$ | ||
| + | [[File:Burn_7.jpg]] | ||
| + | Step 3: | ||
| + | ::Copy ugelis.bin file under lcd/build/ugelis to gree_tools folder | ||
| + | [[File:Burn_3.jpg]] | ||
| − | + | Step 4: | |
| + | ::Command: gree_tool$./gree_tool.ph (burning ugelis.bin file to EAI80 flash and lcd software burning done) | ||
| + | [[File:Burn_8.jpg]] | ||
| − | + | [[File:Burn_9.jpg]] | |
Revision as of 02:13, 13 October 2020
BPI-EAI80 Compiling Steps
Compiling LCD source code
Step 1: Hardware connection
- 1. Connect a 7” LCD cable with a EAI80
- 2. Connect a battery cable with a EAI80
- 3. Connect a type C cable with a NB
Step 2: Modify LCD source code
- 1.Go to src under lcd folder
- 2.Copy main.c file to another folder before modifying its context
- 3.Modifying lcd source code – main.c (under lcd src folder) then saving
Step 3: Execute compiling
- 1.Turn on a terminal, path: github/BPI-EAI80-bsp/ugelis/ugelis_example/example/driver_example/lcd/build)
- 2.Command: make (execute comiling)
Burning ugelis.bin (after compiling) to EAI80 flash
Step 1:
- Turn on a terminal, seek ugelis file under lcd, go to below path:
- github/BPI-EAI80-bsp/ugelis_example/example/driver_example/lcd/build/ugeliss
Step 2:
- Turn on 2nd terminal, go to below path: github/BPI-EAI80-bsp/ugelis/tools/gree_tool$
Step 3:
- Copy ugelis.bin file under lcd/build/ugelis to gree_tools folder
Step 4:
- Command: gree_tool$./gree_tool.ph (burning ugelis.bin file to EAI80 flash and lcd software burning done)
