Difference between revisions of "OLED12832 Module"
| Line 137: | Line 137: | ||
== How to use == | == How to use == | ||
''' | ''' | ||
| − | You can use[https://github.com/bpiq/MikuPi MikuPi] to control it | + | You can use [https://github.com/bpiq/MikuPi MikuPi] to control it |
| − | You can also use[ | + | You can also use [https://github.com/BPI-SINOVOIP/BPI-WiringPi2 BPI-WiringPi2] to control it |
DataSheet | DataSheet | ||
Latest revision as of 01:27, 7 May 2018
OLED23832 Module
overview
OLED12832 Module For BPI is an OLED display module specially designed for BPI. It can plug in all BPI models. Other development boards can also be used.
Number of Pixels：128X32
Size：40X23
Operating Temperature：-30~70℃
Schematic
Chip schematic
The chip is SSD1306,the same as OLED12864
wiring
| Module | GPIO | GPIO | Module |
| 40 | 39 | GND | |
| 38 | 37 | ||
| 36 | 35 | ||
| GND | 34 | 33 | |
| 32 | 31 | ||
| GND | 30 | 29 | |
| 28 | 27 | ||
| 26 | 25 | GND | |
| 24 | 23 | ||
| 22 | 21 | ||
| GND | 20 | 19 | |
| 18 | 17 | ||
| 16 | 15 | ||
| GND | 14 | 13 | |
| 12 | 11 | ||
| 10 | 9 | GND | |
| 8 | 7 | ||
| GND | 6 | 5 | SCL |
| VCC | 4 | 3 | SDA |
| 2 | 1 |
How to use
You can use MikuPi to control it
You can also use BPI-WiringPi2 to control it
DataSheet
