OLED12832 Module
OLED23832 Module
Error creating thumbnail: Unable to save thumbnail to destination
overview
OLED12832 Module For BPI is an OLED display module specially designed for BPI. It can plug in all BPI models. Other development boards can also be used.
Number of Pixels：128X32
Size：40X23
Operating Temperature：-30~70℃
Schematic
Chip schematic
The chip is SSD1306,the same as OLED12864
Error creating thumbnail: Unable to save thumbnail to destination
wiring
| Module | GPIO | GPIO | Module |
| 40 | 39 | GND | |
| 38 | 37 | ||
| 36 | 35 | ||
| GND | 34 | 33 | |
| 32 | 31 | ||
| GND | 30 | 29 | |
| 28 | 27 | ||
| 26 | 25 | GND | |
| 24 | 23 | ||
| 22 | 21 | ||
| GND | 20 | 19 | |
| 18 | 17 | ||
| 16 | 15 | ||
| GND | 14 | 13 | |
| 12 | 11 | ||
| 10 | 9 | GND | |
| 8 | 7 | ||
| GND | 6 | 5 | SCL |
| VCC | 4 | 3 | SDA |
| 2 | 1 |
How to use
You can use MikuPi to control it
You can also use BPI-WiringPi2 to control it
DataSheet
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
