View source for How to get the log information for Banana Pi board

*Video for how to get the log information of Banana Pi board (The baud rate of BPI-R2 PRO ,BPI-P2 PRO, BPI-W3,BPI-M7 is 1500000, other boards' baud rate is 115200)
:https://drive.google.com/file/d/1_1T4jUztxONd8agL-thWuBdekD8WH6cO/view?usp=sharing

==Preparation==

:1.A BPI development board, a TTL serial port cable, and an SD/TF card with a burned image (it can also be burned to eMMC).

:2.MobaXterm  download : https://mobaxterm.mobatek.net/download.html

==Start==

:Next, use BPI-M5 as a demonstration.

:1.Open MobaXterm, then click on Session in the upper left corner and select Serial.

:[[File:Log export-1.jpg]]
:[[File:Log export-2.jpg]]


:2. Connect one end of the TTL cable to the computer

:[[File:TTL cable connection-1.jpg]]

:Insert the development board at the other end. (RX and TX need to be connected in reverse, VCC does not need to be connected)

:[[File:ttl.jpg]]
:[[File:TTL cable_connection-2.jpg]]


:3. Select the port at the Serial port, select the baud rate at Speed (bps), and then click OK.

:(Most development boards for BPI are 115200, with only BPI-R2 PRO ,BPI-P2 PRO, BPI-W3,BPI-M7 being 1500000)

:[[File:Log export-3.jpg]]

:4. Plug in the power to the board and start it

:[[File:Power On.jpg]]

:5. Development board startup completed, enter account password

:[[File:Log export-4.jpg]]

:6. After completing the operation you want, you can now export the log.
:Click on Terminal in the upper left corner, then click on Save terminal tsxt

:[[File:Log export-5.jpg]]

:Select the save location and change the save type to Plain Text File

:[[File:Log export-6.png]]


:7. Open the location you saved to see the log file.