Difference between revisions of "Getting Started with W2"

From Banana Pi Wiki
Jump to: navigation, search
(Created page with "=Introduction= thumb|Overview: BPI-W2 Android 6.0 File:W2_debian.jpg|thumb|[http://forum.banana-pi.org/t/banana-pi-bpi-w2-new-image-debian-9-linu...")
(No difference)

Revision as of 00:24, 23 May 2019


Overview: BPI-W2 Android 6.0

Read more: Banana Pi BPI-W2


Let's get start to develop on BPI-W2, see amazing things happen.

Old page:Getting Started with BPI-W2

Basic Development

Prepare to develop

  • Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
  • Using your USB-Serial Connect debug console on W2

Debug console wire.png

W2 debug console.jpg

Load your first image on W2

 1.You could download latest image from our forum  
 2.Install bpi-tools on your system
 * apt-get install pv
 * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 3.After you download the image, insert your TF card into your Ubuntu
 * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card.
 4.After step 3, then you can insert your TF card into W2, and press power button setup W2.