Banana Pi BPI-F2

From Banana Pi Wiki
Jump to: navigation, search

Introduction

Overview:BPI-F2 with freescale IMX6
Overview:BPI-F2 with freescale IMX6

Banana Pi BPI-F2 use freescale IMX6 Industrial chip design. IMX6 with ARM Cortex-A9 MPCore 4xCPU processor(with TrustZone),this is ths first banana pi board design with freescale chip.

BPI-F2.jpg

Key Features

  • freescale IMX6 Industrial solutions.
  • 2G DDR3 and 8G eMMC flash
  • CAN bus function support
  • Mini PCIE interface
  • 2 camera interface:DVP and MIP

Getting Start

Hardware

Hardware interfact

BPI-F2 interface.JPG

Hardware spec

HardWare Specification of Banana pi BPI-F2
Soc freescale IMX6
CPU ARM Cortex-A9 MPCore 4xCPU processor(with TrustZone)
GPU OpenGL ES 2.0 3D graphics accelerator with forshaders,2D graphics accelerator,and didicated OpenVG 1.1 accelerator
SDRAM 2G DDR3
PCIE 1 mini PCIE interface
CAN bus 1 CAN bus interface
SATA support 1*SATA interface
GPIO 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
On board Network 10/100/1000 Mbit/s Ethernet
Wifi Module N/A
Bluetooth N/A
On board Storage MicroSD \(TF\) card,8G eMMC onboard (option 8-64G)
Display HDMI out, LVDS out
Video HDMI out, LVDS out
Audio outputs 1 * 3.5 headset jack
Camera 1 * DVP camera interface and 1* MIP camera interface
Audio input N/A
USB 2 * USB 2.0 1* USB Otg
Buttons Power & Reset
Leds 3* RGB leds
IR N/A
DC Power 12V/2A with DC port
battery No 3.7V lithium battery power support
Sizes
Weight 80g

Resources

Documents

IMX.6 wiki page : https://en.wikipedia.org/wiki/I.MX#i.MX_6_series

Source code