Difference between revisions of "Using 4G module with BananaPi"

From Banana Pi Wiki
Jump to: navigation, search
(How to use BPI-4G LTE module with BPI-R2)
(How to use BPI-4G LTE module with BPI-R2)
Line 4: Line 4:
 
1.Firstly, use R2 connects LTE module by USB or 14pin Headers. then execute command "lsusb" to have a look if R2 have drove the module. The red box is the id of 4G module.
 
1.Firstly, use R2 connects LTE module by USB or 14pin Headers. then execute command "lsusb" to have a look if R2 have drove the module. The red box is the id of 4G module.
 
[[File:Usb_4g_2.PNG]]
 
[[File:Usb_4g_2.PNG]]
 +
After seeing this, execute command "ls /dev/ttyUSB*" to make sure the 4G module have been recognised as USB devs.
 +
[[File:Usb_4g_3.PNG]]
 +
 +
2. Execute the "./ppp1.sh &"
 +
[[File:Usb_4g_4.PNG]]

Revision as of 05:33, 10 May 2018

How to use BPI-4G LTE module with BPI-R2

Usb 4g 1.jpg

1.Firstly, use R2 connects LTE module by USB or 14pin Headers. then execute command "lsusb" to have a look if R2 have drove the module. The red box is the id of 4G module. Usb 4g 2.PNG After seeing this, execute command "ls /dev/ttyUSB*" to make sure the 4G module have been recognised as USB devs. Usb 4g 3.PNG

2. Execute the "./ppp1.sh &" Usb 4g 4.PNG