Getting Started with W2

From Banana Pi Wiki
Revision as of 00:54, 23 May 2019 by JackZengWiki (talk | contribs) (GMAC)
Jump to: navigation, search


Overview: BPI-W2 Android 6.0

Read more: Banana Pi BPI-W2


Let's get start to develop on BPI-W2, see amazing things happen.

Old page:Getting Started with BPI-W2

Basic Development

Prepare to develop

  • Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
  • Using your USB-Serial Connect debug console on W2

Debug console wire.png

W2 debug console.jpg

Load your first image on W2

 1.You could download latest image from our forum  
 2.Install bpi-tools on your system
 * apt-get install pv
 * curl -sL | sudo -E bash
 3.After you download the image, insert your TF card into your Ubuntu
 * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card.
 4.After step 3, then you can insert your TF card into W2, and press power button setup W2.

Advanced Development


GPIO Control

PWM Control



  • iperf3 -c [server]

W2 iperf3 c.jpg

  • iperf3 -u -c [server]

W2 iperf3 u c.jpg

  • iperf3 -s

W2 iperf3 s.jpg

WiFi Client

AP mode

Develop 4G module with W2

Make your own image