Difference between revisions of "Getting Started with W2"

From Banana Pi Wiki
Jump to: navigation, search
(Load your first image on W2)
(Advanced Development)
Line 42: Line 42:
====PWM Control====
====PWM Control====
====WiFi Client====
====AP mode====
===Develop 4G module with W2===
===Develop 4G module with W2===
===WiFi and Ap mode on W2===
====WiFi Client====
====AP mode====
===Make your own image===
===Make your own image===

Revision as of 00:47, 23 May 2019


Overview: BPI-W2 Android 6.0

Read more: Banana Pi BPI-W2


Let's get start to develop on BPI-W2, see amazing things happen.

Old page:Getting Started with BPI-W2

Basic Development

Prepare to develop

  • Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
  • Using your USB-Serial Connect debug console on W2

Debug console wire.png

W2 debug console.jpg

Load your first image on W2

 1.You could download latest image from our forum  
 2.Install bpi-tools on your system
 * apt-get install pv
 * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 3.After you download the image, insert your TF card into your Ubuntu
 * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card.
 4.After step 3, then you can insert your TF card into W2, and press power button setup W2.

Advanced Development


GPIO Control

PWM Control



WiFi Client

AP mode

Develop 4G module with W2

Make your own image