Difference between revisions of "Getting Started with R2"

From Banana Pi Wiki
Jump to: navigation, search
(Prepare to develop)
(Prepare to develop)
Line 19: Line 19:
 
==Basic Development==
 
==Basic Development==
 
===Prepare to develop===
 
===Prepare to develop===
1.Prepare 16G/above TF card, USB-Serial interface
+
  1.Prepare 16G/above TF card, USB-Serial interface
  
2.Using your USB-Serial Connect debug console on R2
+
  2.Using your USB-Serial Connect debug console on R2
  
[[Image:R2_debug_console.png|240px]]
+
  [[Image:R2_debug_console.png|240px]]
  
 
===Load your first image on R2===
 
===Load your first image on R2===

Revision as of 02:48, 5 May 2018

Introduction

The Banana Pi R2 is a router based development board, which can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. It has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Key Features

  • MediaTek MT7623N, Quad-core ARM Cortex-A7
  • Mali 450 MP4 GPU
  • 2G DDR3 SDRAM
  • Mini PCIE interface
  • SATA interface
  • 4x Gigabit LAN 1x Gigabit WAN

Hardware

R2.jpg

Development

Let's get start to develop on BPI-R2, see amazing things happen.

Basic Development

Prepare to develop

 1.Prepare 16G/above TF card, USB-Serial interface
 2.Using your USB-Serial Connect debug console on R2
 R2 debug console.png

Load your first image on R2

Build your own image on R2

Advanced Development

Develop 4G module with R2

Wifi and Ap mode on R2

FAQ

Reference Link

http://www.banana-pi.org/r2.html