Difference between revisions of "Getting Started with R1"

From Banana Pi Wiki
Jump to: navigation, search
(Introduction)
(BPI-R1)
Line 1: Line 1:
 
=Introduction=
 
=Introduction=
 
==BPI-R1==
 
==BPI-R1==
[[File:R1_ubuntu.png|thumb|Overview: BPI-R1 ubuntu linux]]
+
[[File:R1_bananian.png|thumb|Overview: BPI-R1 bananian linux]]
  
 
   The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
 
   The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.

Revision as of 05:06, 29 May 2018

Introduction

BPI-R1

Overview: BPI-R1 bananian linux
  The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
  The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Key Features

  • Dual-core 1.0GHz CPU
  • 1 GB DDR3 memory
  • Mali-400 MP2 with Open GL ES 2.0/1.1
  • 4x Gigabit LAN 1x Gigabit WAN

Development

Basic Development

Prepare to develop

 * Prepare 16G/above TF card, USB-Serial interface, Ubuntu System
 * Using your USB-Serial Connect debug console on R1
 R1 debug console.png


Load your first image on R1

 1.You could download latest image from our forum
 
 2.Install bpi-tools on your Ubuntu
 * apt-get install pv
 * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
 3.After you download the image, insert your TF card into your Ubuntu
 * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card
 
 4.After step 3, then you can insert your TF card into R1, and press power button for around 10s to setup R1