Difference between revisions of "Banana Pi BPI-M5"

From Banana Pi Wiki
Jump to: navigation, search
(BPI-M5 VS Odroid C4 VS Raspberry Pi 4)
(BPI-M5 VS Odroid C4 VS Raspberry Pi 4)
Line 77: Line 77:
 
|Video Output || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 2 × micro-HDMI 2.0
 
|Video Output || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) || 2 × micro-HDMI 2.0
 
|-
 
|-
|Audio Output ||3.5mm jack and 1 x HDMI digital output || support PIN socket for audio || 3.5 mm analogue audio-video jack
+
|Audio Output ||3.5mm jack and 1 x HDMI digital output || Optional SPDIF optical output || 3.5 mm analogue audio-video jack
 
|-
 
|-
 
|DSI ||N/A ||N/A || 2-lane MIPI DSI display port
 
|DSI ||N/A ||N/A || 2-lane MIPI DSI display port

Revision as of 00:12, 7 October 2020

Introduction

Amlogic S905X3 Processor

Banana Pi BPI-M5 is a new generation single board computer design , use Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) Processor. Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz). support 4GB LPDDR4 and 16G eMMC flash. it have 4 USB 3.0 port,1GbE LAN port.

Banana Pi BPI-M5 7.jpg

Key Features

  • Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) Processor
  • Mali-G31 GPU
  • 4GB LPDDR4
  • 16GB eMMC flash on board.
  • 4 USB 3.0 port
  • 1 GbE LAN por
  • HDMI output

Getting Start

Hardware

Hardware interfact

File:Banana Pi BPI-M5 interface.jpg

Hardware spec

HardWare Specification of Banana pi BPI-M5
CPU Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz)
GPU Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz)
Memory 4 GB LPDDR4
Storage MicroSD slot with support for up to 256GB expansion and 16G eMMC flash with support for up to 64GB
Network 10/100/1000 Mbit/s Ethernet ,Optional WiFi USB dongle
Video Output(s) 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID)
Audio Output(s) 3.5mm jack and 1 x HDMI digital output
USB ports USB 3.0 PORT (x4)
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM
Switches Reset, Power and U-boot
LED Power Status and Activity status
Power Source 5 volt @3A via Micro USB (TYPE C)
Size & Weight 92x60mm, 48g
OS Android and Linux

BPI-M5 VS Odroid C4 VS Raspberry Pi 4

BPI-M5 VS Odroid C4 VS RPI 4
Banana Pi BPI-M5 Odroid C4 Raspberry Pi 4
Processor Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
GPU Mali-G31 MP2 GPU Mali-G31 MP2 GPU Broadcom VideoCore VI
RAM 4GB LPDDR4 DDR4 4GiB with 32-bit bus width 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
Storage micro SD card slot & 16GB eMMC flash on board micro SD card slot , eMMC connector for option micro SD card slot, non EMMC
Network GbE ,Optional WiFi USB dongle GbE GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Video Output 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) 2 × micro-HDMI 2.0
Audio Output 3.5mm jack and 1 x HDMI digital output Optional SPDIF optical output 3.5 mm analogue audio-video jack
DSI N/A N/A 2-lane MIPI DSI display port
CSI N/A N/A 2-lane MIPI CSI camera port
USB USB 3.0 x 4 TYPE C USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) 2 USB 3.0 ports; 2 USB 2.0 ports;
Power 5 volt @3A via Micro USB (TYPE C) 1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) 5V DC via USB-C connector (minimum 3A*)
IR Yes Yes N/A
GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). 40 x GPIO pins 40-pin GPIO header, populated
Button Reset, user and U-boot N/A N/A
LED Power Status and Activity status Power Status and Activity status Power Status and Activity status
Dimensions & weight 85x56mm, 48g 85mm x 56mm x 1.0mm 59g 88 mm × 58 mm × 19.5 mm, 46 g
Linux Support Linux & Android Linux & Android Linux & Android

GPIO PIN define

Resources

Source code

Android

Linux

documents

Image Release