Difference between revisions of "Banana Pi BPI-M5"
(→Ubuntu Core 20) |
|||
(36 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
[[zh:香蕉派_BPI-M5]] | [[zh:香蕉派_BPI-M5]] | ||
=BPI-M5 Introduction= | =BPI-M5 Introduction= | ||
− | [[File:Banana_Pi_BPI-M5_4.JPG|thumb|[[Banana Pi BPI-M5]]]] | + | [[File:Banana_Pi_BPI-M5_4.JPG|thumb|[[Banana Pi BPI-M5]] with S905x3 design]] |
[[File:BPI-M2_Pro_2.jpg|thumb|[[Banana Pi BPI-M2 Pro]] S905x3 design]] | [[File:BPI-M2_Pro_2.jpg|thumb|[[Banana Pi BPI-M2 Pro]] S905x3 design]] | ||
+ | [[File:Banana_Pi_BPI-M2S_1.jpg|thumb|[[Banana Pi BPI-M2S]] Amlogic A311D/S922 chip]] | ||
[[File:Banana_Pi_BPI-M5_1.JPG|thumb|Amlogic S905X3 Processor]] | [[File:Banana_Pi_BPI-M5_1.JPG|thumb|Amlogic S905X3 Processor]] | ||
+ | [[File:Banana_Pi_BPI-M5_2.jpg|thumb|Amlogic S905X3 Processor]] | ||
+ | |||
[[File:BPI-M5_case_1.jpg|thumb|BPI-M5 case design]] | [[File:BPI-M5_case_1.jpg|thumb|BPI-M5 case design]] | ||
[[File:Wifibt_module_1.jpeg|thumb|WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluectooch 5.0]] | [[File:Wifibt_module_1.jpeg|thumb|WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluectooch 5.0]] | ||
Line 9: | Line 12: | ||
Banana Pi BPI-M5 is the next generation single board computer from Banana Pi in 2020. It is powered by Amlogic S905X3 quad-core Cortex-A55 (2.0 XXGHz) processor.Onboard 4GB LPDDR4 memory and 16GB EMMC storage, and supports 4 USB 3.0 interface, a gigabit network port. | Banana Pi BPI-M5 is the next generation single board computer from Banana Pi in 2020. It is powered by Amlogic S905X3 quad-core Cortex-A55 (2.0 XXGHz) processor.Onboard 4GB LPDDR4 memory and 16GB EMMC storage, and supports 4 USB 3.0 interface, a gigabit network port. | ||
− | [[File:Banana_Pi_BPI- | + | [[File:Banana_Pi_BPI-M5.jpg]] |
=Key Features= | =Key Features= | ||
Line 21: | Line 24: | ||
==Getting Start== | ==Getting Start== | ||
− | *[[Getting Started with | + | *[[Getting Started with M5/M2Pro]] |
=Hardware= | =Hardware= | ||
− | ==Hardware | + | ==Hardware interface== |
− | [[File:Banana_Pi_BPI- | + | [[File:Banana_Pi_BPI-M5_interface1.jpg]] |
==Hardware spec== | ==Hardware spec== | ||
Line 65: | Line 68: | ||
===SDIO interface Wifi&BT=== | ===SDIO interface Wifi&BT=== | ||
− | * WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and | + | * WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooch 5.0 , support BPI-M5 and BPI-F2P |
− | [[File: | + | [[File:Wifibt_module1_.jpeg]] |
*how to use : http://wiki.banana-pi.org/Getting_Started_with_BPI-M5#Wifi.2FBT_support | *how to use : http://wiki.banana-pi.org/Getting_Started_with_BPI-M5#Wifi.2FBT_support | ||
Line 237: | Line 240: | ||
== Resources== | == Resources== | ||
+ | *Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the [https://drive.google.com/drive/folders/0B_YnvHgh2rwjVjNyS2pheEtWQlk?resourcekey=0-U4TI84zIBdId7bHHjf2qKA new link bpi-image Files] | ||
+ | *All banana pi [https://drive.google.com/drive/folders/0B4PAo2nW2Kfndjh6SW9MS2xKSWs?resourcekey=0-qXGFXKmd7AVy0S81OXM1RA&usp=sharing docement(SCH file,DXF file,and doc)] | ||
*[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/files/?p=%2FDocuments%2FBPI-M5%2FBPI-M5-SCH-V10-Release.pdf BPI-M5 schematic diagram] | *[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/files/?p=%2FDocuments%2FBPI-M5%2FBPI-M5-SCH-V10-Release.pdf BPI-M5 schematic diagram] | ||
*[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/files/?p=%2FDocuments%2FBPI-M5%2FBPI-M5-PCB-V10-DXF.rar BPI-M5 PCB DXF file] | *[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/files/?p=%2FDocuments%2FBPI-M5%2FBPI-M5-PCB-V10-DXF.rar BPI-M5 PCB DXF file] | ||
*[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/files/?p=%2FDocuments%2FBPI-M5%2FS905X3_Public_Datasheet_Hardkernel.pdf Amlogic S905x3 datasheet] | *[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/files/?p=%2FDocuments%2FBPI-M5%2FS905X3_Public_Datasheet_Hardkernel.pdf Amlogic S905x3 datasheet] | ||
*[http://wiki.banana-pi.org/Product_certification Banana Pi BPI-M5 CE,FCC,RoHS Certification] | *[http://wiki.banana-pi.org/Product_certification Banana Pi BPI-M5 CE,FCC,RoHS Certification] | ||
+ | *Install OpenGapps on Bananapi BPI-M5 Android 9.0:https://www.youtube.com/watch?v=fXOKmWfpqF8 | ||
=System image= | =System image= | ||
Line 257: | Line 263: | ||
==Linux== | ==Linux== | ||
:[http://wiki.banana-pi.org/Getting_Started_with_BPI-M5#Linux How to flash Linux Image] | :[http://wiki.banana-pi.org/Getting_Started_with_BPI-M5#Linux How to flash Linux Image] | ||
+ | |||
+ | ===Rasbian=== | ||
+ | *BPI-M5 BPI-M2 Pro new image:Rasbian image, 2022-4-09 update, Rasbian image for linux kernel 4.9 and 5.17. support 32bit and 64 bit,please choose the right image | ||
+ | ::google driver: https://drive.google.com/drive/folders/1oqamIMl5Kmb3LVYMPFw-1tilvwKQI6n- | ||
+ | ::discuss on forum : https://forum.banana-pi.org/t/bpi-m5-bpi-m2-pro-new-image-rasbian-image-2022-4-09-update/13246 | ||
===Ubuntu=== | ===Ubuntu=== | ||
Line 273: | Line 284: | ||
==Third part image== | ==Third part image== | ||
+ | ===EmuELEC=== | ||
+ | *This is a porting of EmuELEC v4.5 for BPI-M5. I ported from odroid c4 official EmuELEC image. PS3 a XBOX ONE S gamepad controllers were tested and work fine. | ||
+ | *https://forum.banana-pi.org/t/emuelec-for-bpi-m5/12095 | ||
===CoreELEC=== | ===CoreELEC=== | ||
* CoreELEC 19.2 | * CoreELEC 19.2 | ||
Line 279: | Line 293: | ||
::Install Guide: https://coreelec.org/#install | ::Install Guide: https://coreelec.org/#install | ||
::Source Code: https://github.com/CoreELEC/CoreELEC | ::Source Code: https://github.com/CoreELEC/CoreELEC | ||
+ | ::how to install: https://wiki.coreelec.org/coreelec:bpim2pro | ||
===Armbian=== | ===Armbian=== | ||
Line 295: | Line 310: | ||
===Odroid Android image=== | ===Odroid Android image=== | ||
− | + | *Base on Odroid android source code and build for bananapi m5/m2pro | |
− | :Download: https://drive.google.com/drive/folders/1u_CddlHvpAMu2VZJfIfUKTsFFyigCWig | + | :Download: |
+ | ::Google Drive: https://drive.google.com/drive/folders/1u_CddlHvpAMu2VZJfIfUKTsFFyigCWig | ||
:Install Guide: https://forum.odroid.com/viewtopic.php?f=204&t=38579 | :Install Guide: https://forum.odroid.com/viewtopic.php?f=204&t=38579 | ||
+ | |||
+ | *Odroid ubuntu IMG for BPI-M5: | ||
+ | ::https://forum.banana-pi.org/t/odroid-ubuntu-img-for-bpi-m5/12169 | ||
===Ubuntu Core 20=== | ===Ubuntu Core 20=== | ||
− | :Ubuntu Core 20 demo image for bananapi m5/m2pro | + | :Ubuntu Core 20 demo image for bananapi m5/m2pro. |
+ | :Download: | ||
+ | ::Google drive: https://drive.google.com/drive/folders/1TdAQ-HdggKrOPmWi0chpHDJY0SMWlUaC | ||
+ | ::Baidu cloud : | ||
+ | :Install Guide: https://ubuntu.com/core/docs/uc20/install | ||
+ | |||
+ | ===Archlinux=== | ||
+ | *Archlinux xfce and minimal demo image, kernel 4.9, image build refer to [https://archdroid.org/ Archdroid] | ||
+ | :login: alarm/alarm, or root/root | ||
+ | :Download: | ||
+ | ::Google drive:https://drive.google.com/drive/folders/1rSSNgbseY2mwTMIauGR1yrXN8RPKzuk6 | ||
+ | ::Baidu link : https://pan.baidu.com/s/1Ck_H51jPUyAv98o73I8oAw Pincode: rbv2 | ||
+ | ::discuss on forum : https://forum.banana-pi.org/t/bpi-m5-bpi-m2-pro-new-image-archlinux-2021-9-14/12595 | ||
===HuaWei OpenEuler=== | ===HuaWei OpenEuler=== | ||
− | * | + | *OpenEuler demo image, bpi kernel 4.9 |
− | + | :Download: | |
− | :: | + | ::Baidu link :https://pan.baidu.com/s/12b7q3y-m3YRyD7GwhKE0QA Pincode:lv50 |
− | :: | + | :SIG gitee link : https://gitee.com/openeuler/raspberrypi |
+ | :Discuss on fourm : http://forum.banana-pi.org/ | ||
+ | |||
+ | ===Manjaro for BPI-M5=== | ||
+ | |||
+ | Manjaro porting for BPI-M5 from Official Image for Odroid C4, the ported image use kernel 5.10. If anyone is interested on give it a try, the download link is below. | ||
+ | *Download Link: https://mega.nz/folder/BuZWkLhC#phC9KSsassB4bmkAegYykA | ||
+ | *discuss on forum : https://forum.banana-pi.org/t/manjaro-for-bpi-m5/12726 | ||
=Easy to buy= | =Easy to buy= |
Revision as of 18:01, 30 June 2022
BPI-M5 Introduction
Banana Pi BPI-M5 is the next generation single board computer from Banana Pi in 2020. It is powered by Amlogic S905X3 quad-core Cortex-A55 (2.0 XXGHz) processor.Onboard 4GB LPDDR4 memory and 16GB EMMC storage, and supports 4 USB 3.0 interface, a gigabit network port.
Key Features
- Amlogic S905X3 quad core Cortex-A55 (2.0xxGHz)
- Mali-G31 GPU
- 4GB LPDDR4
- 16GB eMMC flash
- 4 USB 3.0
- 1 GbE ethernet
- HDMI output
Getting Start
Hardware
Hardware interface
Hardware spec
HardWare Specification of Banana pi BPI-M5 | |||
CPU | Amlogic S905X3 Quad-Core Cortex-A55 (2.0xxGHz) | ||
GPU | Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) | ||
Memory | 4 GB LPDDR4 | ||
Storage | MicroSD slot with support for up to 256GB expansion and 16G eMMC flash with support for up to 64GB | ||
Network | 10/100/1000 Mbit/s Ethernet ,Optional WiFi USB dongle | ||
Video Output(s) | 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) | ||
Audio Output(s) | 3.5mm jack and 1 x HDMI digital output | ||
USB ports | USB 3.0 PORT (x4) | ||
GPIO | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM | ||
Switches | Reset, Power and U-boot | ||
LED | Power Status and Activity status | ||
Power Source | 5 volt @3A via Micro USB (TYPE C) | ||
Size & Weight | 92x60mm, 48g | ||
OS | Android and Linux |
Wifi & BT support via expansion board
SDIO interface Wifi&BT
- WiFi&BT board, 802.11 a/b/g/n/ac 2T2R WiFi and Bluetooch 5.0 , support BPI-M5 and BPI-F2P
- how to use : http://wiki.banana-pi.org/Getting_Started_with_BPI-M5#Wifi.2FBT_support
- discuss on forum : http://forum.banana-pi.org/t/bpi-m5-wifi-bt-board-sdio-interface-802-11-a-b-g-n-ac-2t2r-wifi-and-bluectooch-5-0/11846
- easy to buy sample : https://www.aliexpress.com/item/1005002550783568.html?spm=5261.ProductManageOnline.0.0.34ed4edfgdV59j
standard USB interface Wifi&BT
- Banana Pi Wifi&BT 4.2 expansion Board, standard USB interface, so support all open source boards via USB port.IEEE 802.11b/g/n/ac(1T1R) USB WLANAnd BT Module
- how to use : http://wiki.banana-pi.org/Getting_Started_with_BPI-M5#Wifi.2FBT_support
- discuss on forum : http://forum.banana-pi.org/t/banana-pi-wifi-bt-4-2-expansion-board-standard-usb-interface/12162
BPI-M2 Pro VS BPI-M5 VS Odroid C4 VS RPI 4
BPI-M2 Pro VS BPI-M5 VS Odroid C4 VS RPI 4 | |||||
Banana Pi BPI-M2 Pro | Banana Pi BPI-M5 | Odroid C4 | Raspberry Pi 4 | ||
Processor | Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz | Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz | Amlogic S905X3 Quad-Core Cortex-A55 ARMv8.2-A 64-bit 1.5GHz | Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz | |
GPU | Mali-G31 MP2 GPU | Mali-G31 MP2 GPU | Mali-G31 MP2 GPU | Broadcom VideoCore VI | |
RAM | 2GB LPDDR4 | 4GB LPDDR4 | DDR4 4GiB with 32-bit bus width | 2GB, 4GB or 8GB LPDDR4-3200 SDRAM | |
Storage | micro SD card slot & 16GB eMMC flash on board | micro SD card slot & 16GB eMMC flash on board | micro SD card slot , eMMC connector for option | micro SD card slot, non EMMC | |
Network | 1 GbE ,WiFi&BT5.0 onbard | GbE ,Optional WiFi USB dongle | GbE | GbE, 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE | |
Video Output | 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) | 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) | 1 x HDMI 2.1 (up to 4K@60Hz with HDR, CEC, EDID) | 2 × micro-HDMI 2.0 | |
Audio Output | 1 x HDMI digital output | 3.5mm jack and 1 x HDMI digital output | Optional SPDIF optical output | 3.5 mm analogue audio-video jack | |
DSI | N/A | N/A | N/A | 2-lane MIPI DSI display port | |
CSI | N/A | N/A | N/A | 2-lane MIPI CSI camera port | |
USB | USB 3.0 x 2 1 Micro USB 2.0 | USB 3.0 x 4 TYPE C | USB 3.0 x 4, 1 x Micro USB 2.0 port (OTG) | 2 USB 3.0 ports; 2 USB 2.0 ports; | |
Power | 5 volt @3A via DC power | 5 volt @3A via Micro USB (TYPE C) | 1 x DC power jack (Outer diameter : 5.5mm, inner diameter : 2.1mm) | 5V DC via USB-C connector (minimum 3A*) | |
IR | Yes | Yes | Yes | N/A | |
GPIO | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). | 40 x GPIO pins | 40-pin GPIO header, populated | |
Button | Reset, user and U-boot | Reset, user and U-boot | N/A | N/A | |
LED | Power Status and Activity status | Power Status and Activity status | Power Status and Activity status | Power Status and Activity status | |
Dimensions & weight | 65mm x 65mm,58g | 85mm x 56mm, 48g | 85mm x 56mm 59g | 88 mm × 58 mm, 46 g | |
System Support | Linux & Android | Linux & Android | Linux & Android | Linux & Android |
GPIO PIN define
BPI-M5 40PIN GPIO (CON2)
GPIO Pin Name | Default Function | Function2 | Function3 |
CON1-P01 | VCC-3V3 | ||
CON1-P02 | VCC5V | ||
CON1-P03 | GPIOX_17 | I2C_M2_SDA | |
CON1-P04 | VCC5V | ||
CON1-P05 | GPIOX_18 | I2C_M2_SCL | |
CON1-P06 | GND | ||
CON1-P07 | GPIOX_5 SDIO_CMD | ||
CON1-P08 | GPIOX_12 | UART_A_TX | |
CON1-P09 | GND | ||
CON1-P10 | GPIOX_13 | UART_A_RX | |
CON1-P11 | GPIOX_3 SDIO_D3 | ||
CON1-P12 | GPIOAO_8 | TDMB_SCLK | |
CON1-P13 | GPIOX_4 SDIO_CLK | ||
CON1-P14 | GND | ||
CON1-P15 | GPIOX_7 PWM_F | ||
CON1-P16 | GPIOX_0 SDIO_D0 | ||
CON1-P17 | VCC-3V3 | ||
CON1-P18 | GPIOX_1 SDIO_D1 | ||
CON1-P19 | GPIOX_8 PCM_DIN | ||
CON1-P20 | GND | ||
CON1-P21 | GPIOX_9 PCM_DOUT | ||
CON1-P22 | GPIOX_2 SDIO_D2 | ||
CON1-P23 | GPIOX_11 | PCM_CLK | |
CON1-P24 | GPIOX_10 | PCM_SYNC | |
CON1-P25 | GND | ||
CON1-P26 | GPIOX_16 | PWM_E | |
CON1-P27 | GPIOA_14 | I2C_M3_SDA | |
CON1-P28 | GPIOA_15 | I2C_M3_SCL | |
CON1-P29 | GPIOX_14 | UART_A_CTS | |
CON1-P30 | GND | ||
CON1-P31 | GPIOX_15 | UART_A_RTS | |
CON1-P32 | GPIOX_19 | PWM_B | |
CON1-P33 | GPIOX_6 PWM_A | ||
CON1-P34 | GND | ||
CON1-P35 | GPIOAO_7 | TDMB_FS | |
CON1-P36 | GPIOH_5 SPDIF_IN | ||
CON1-P37 | GPIOAO_7 | I2S_MCLK | |
CON1-P38 | GPIOAO_10 | TDMB_DIN | SPDIF_OUT |
CON1-P39 | GND | ||
CON1-P40 | GPIOAO_4 | TDMB_DOUT |
BPI-M5 Debug UART(CON1)
CON2-P1 | GND |
CON2-P2 | UART0-RX |
CON2-P3 | UART0-TX |
Development
Source code
Android
android 9 source code: https://github.com/BPI-SINOVOIP/BPI-S905X3-Android9
How to build the Android Source Code
Linux BSP source code
Linux BSP source code: https://github.com/BPI-SINOVOIP/BPI-M5-bsp
How to build the Linux BSP Source Code
Resources
- Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the new link bpi-image Files
- All banana pi docement(SCH file,DXF file,and doc)
- BPI-M5 schematic diagram
- BPI-M5 PCB DXF file
- Amlogic S905x3 datasheet
- Banana Pi BPI-M5 CE,FCC,RoHS Certification
- Install OpenGapps on Bananapi BPI-M5 Android 9.0:https://www.youtube.com/watch?v=fXOKmWfpqF8
System image
Android
- 2021-05-20 release, Android 9.0 with kernel 4.9.113, mbox variant ui image
- Download: 2021-05-20-bpi-m5-m2pro-mbox-android9-emmc.zip
- MD5: dda75a075a5d7572756f57e4a256dffa
- 2021-05-20 release, Android 9.0 with kernel 4.9.113, tablet variant ui image
- Download: 2021-05-20-bpi-m5-m2pro-tablet-android9-emmc.zip
- MD5: 27381d5e307034e5c5456b167f67ef75
Linux
Rasbian
- BPI-M5 BPI-M2 Pro new image:Rasbian image, 2022-4-09 update, Rasbian image for linux kernel 4.9 and 5.17. support 32bit and 64 bit,please choose the right image
Ubuntu
- 2021-06-21 release, Ubuntu Mate Desktop 20.04 with kernel 4.9.241
- Download: 2021-06-21-ubuntu-20.04-mate-desktop-bpi-m5-m2pro-aarch64-sd-emmc.img.zip
- MD5: cd6bc3cb4fba1b83e2e3f63fd49ba15b
- 2021-06-21 release, Ubuntu Server 20.04 with kernel 4.9.241
- Download: 2021-06-21-ubuntu-20.04-server-bpi-m5-m2pro-aarch64-sd-emmc.img.zip
- MD5: 5c896c37eaa590cfbb8a6c7a5ba433a0
Debian
- 2021-06-21 release, Debian Buster with kernel 4.9.241
- Download: 2021-06-21-debian-10-buster-bpi-m5-m2pro-aarch64-sd-emmc.img.zip
- MD5: 4ea1d71a5ba1a8fa743e4c8abbe7569b
Third part image
EmuELEC
- This is a porting of EmuELEC v4.5 for BPI-M5. I ported from odroid c4 official EmuELEC image. PS3 a XBOX ONE S gamepad controllers were tested and work fine.
- https://forum.banana-pi.org/t/emuelec-for-bpi-m5/12095
CoreELEC
- CoreELEC 19.2
- CoreELEC official support Bananapi M5 and M2Pro since 19.2-Matrix_rc1
- Download: https://coreelec.org/#download
- Install Guide: https://coreelec.org/#install
- Source Code: https://github.com/CoreELEC/CoreELEC
- how to install: https://wiki.coreelec.org/coreelec:bpim2pro
Armbian
- Armbian unstable legacy and current build for Bananapi M5 and M2Pro
- Google Drive: https://drive.google.com/drive/folders/1Cx_DA90Tbr8_M_8eQd-NwFUOp3UTwhYt
- Baidu Cloud : https://pan.baidu.com/s/15y4LNg4K-w0vrwMTcg5VGQ Pincode: j9aj
Volumio
- Download:
- Google drive: https://drive.google.com/drive/folders/1B7nsy4Jxt2lBgXoA6XEnaamEQvZyHI8f
- Baidu cloud : https://pan.baidu.com/s/1mj9OC8P2VSI5GAMnIKGBqA PinCode: mrrb
- User Guide: https://cdn.volumio.org/wp-content/uploads/2019/01/Quick-Start-Guide-Volumio.pdf
- Source code: https://github.com/Dangku/volumio-build
- Platform prebuild package: https://github.com/Dangku/volumio-platform-bananapi
- Development guilde: https://volumio.github.io/docs/User_Manual/Quick_Start_Guide.html
Odroid Android image
- Base on Odroid android source code and build for bananapi m5/m2pro
- Download:
- Install Guide: https://forum.odroid.com/viewtopic.php?f=204&t=38579
- Odroid ubuntu IMG for BPI-M5:
Ubuntu Core 20
- Ubuntu Core 20 demo image for bananapi m5/m2pro.
- Download:
- Google drive: https://drive.google.com/drive/folders/1TdAQ-HdggKrOPmWi0chpHDJY0SMWlUaC
- Baidu cloud :
- Install Guide: https://ubuntu.com/core/docs/uc20/install
Archlinux
- Archlinux xfce and minimal demo image, kernel 4.9, image build refer to Archdroid
- login: alarm/alarm, or root/root
- Download:
- Google drive:https://drive.google.com/drive/folders/1rSSNgbseY2mwTMIauGR1yrXN8RPKzuk6
- Baidu link : https://pan.baidu.com/s/1Ck_H51jPUyAv98o73I8oAw Pincode: rbv2
- discuss on forum : https://forum.banana-pi.org/t/bpi-m5-bpi-m2-pro-new-image-archlinux-2021-9-14/12595
HuaWei OpenEuler
- OpenEuler demo image, bpi kernel 4.9
- Download:
- Baidu link :https://pan.baidu.com/s/12b7q3y-m3YRyD7GwhKE0QA Pincode:lv50
- SIG gitee link : https://gitee.com/openeuler/raspberrypi
- Discuss on fourm : http://forum.banana-pi.org/
Manjaro for BPI-M5
Manjaro porting for BPI-M5 from Official Image for Odroid C4, the ported image use kernel 5.10. If anyone is interested on give it a try, the download link is below.
- Download Link: https://mega.nz/folder/BuZWkLhC#phC9KSsassB4bmkAegYykA
- discuss on forum : https://forum.banana-pi.org/t/manjaro-for-bpi-m5/12726
Easy to buy
- easy to buy RTL8822 wifi module sample : https://www.aliexpress.com/item/1005002550783568.html?spm=5261.ProductManageOnline.0.0.34ed4edfgdV59j
- Mass order,please contact : [email protected]