Difference between revisions of "BPI Open debugger board"

From Banana Pi Wiki
Jump to: navigation, search
(How to use)
Line 24: Line 24:
=How to use=
=How to use=
please see online gitbook doc : https://bananapi.gitbooks.io/bpi-open-debugger-burn-board/content/en/

Revision as of 19:59, 12 May 2018

Hardware Specification

Open Debugger is a set of programming tools in the development of STM series of microcontrollers, TI CC1x, 2x, TI CC3x series SOC, when STC Series MCU can be programmed quickly and easily debug, debugging programmer does not have to do something different series of chips switching plug tedious work. In addition, it also integrates a USB to serial port, which is a common interface for embedded development. It is also one of USB2.0 HUB, making it easy to extend to other USB tools. With it, no longer need to face a bunch of different writer, complicated mess of wiring, USB port deficiencies.


  • Operating Voltage:DC 5V
  • ting temperature:0°C to 85°C
  • The onboard voltage output::3.3 V
  • Maximum output current:2000 mA
  • Supported operating systems:
Microsoft® Windows® 2000
Windows XP SP2/SP3 operating system (32-bit versions)
Windows Vista® operating system (32 and 64 bit)
Windows 7 operating system (32 and 64 bit)
Windows 8 operating system (32 and 64 bit)

Hardware interface

Open dubugger 1.png

Schematic diagram

How to use

please see online gitbook doc : https://bananapi.gitbooks.io/bpi-open-debugger-burn-board/content/en/