Getting Started with W2

Introduction

Overview: BPI-W2 Android 6.0

Debian 9 Linux Image Release 2018-09-18

BananaPI-W2 Ubuntu 18.04 New Image Release 2018-09-17

BananaPI-W2 Raspbian 9.4 New Image Release 2018-09-17

RPiTCv3_1.12-demo-bpi-w2-beta-2018-09-03

Read more: Banana Pi BPI-W2

Development

Let's get start to develop on BPI-W2, see amazing things happen.

Old page：Getting Started with BPI-W2

Basic Development

Prepare to develop

• Prepare 8G/above TF card, USB-Serial interface, PC with Ubuntu System
• Using your USB-Serial Connect debug console on W2

Load your first image on W2

 1.You could download latest image from our forum  
 
 2.Install bpi-tools on your system
 * apt-get install pv
 * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
 
 3.After you download the image, insert your TF card into your Ubuntu
 * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card.
 
 4.After step 3, then you can insert your TF card into W2, and press power button setup W2.