4 Pycharm IDE programming

Install Python 3.7

• get Python, the latest version is (3.7, 11/08/2018)
• use Windows click here to download
• setup interface is as follows!

• the system already has Python.

Install the pycharm community version

• Get pycharm
• Using the Windows system click here to download the 2018 - version 2.3 (community free of charge)
• Tip: 2018.3.3 change is too big, do not use, wait for me to compile repair. (2019/01/13)
• Important note 1: program installation and project under Windows must be under the system disk (path should be consistent)
• Important clew 2, Linux system if there is a serial connection, please kindly check whether the serial port for the average user permissions, if not sure, please check this instruction ` usermod - a - G dialout Username && sudo reboot `, Username is to point to your user name, not a Username.
• When the installation is complete, open it. Press the default Settings to enter the following interface.

Create a new project

• Click Create New Project to bring up the following interface.

• If you do not have Python installed, here is the interface

• Finally, you can see that the project has been established and completed.

• • Refer to the official documentation of pycharm for more methods

Install the MicroPython plug-in

• Note: it is now recommended to use the [intellij-mpfshell-1.1.1.1.zip plug-in version instead of the older version
• - releases in the release directory intellij micropython - 1.1.0. Zip the plugin file, and information about the plug-in inofficial introduction and official GIT