Getting Started with BPI-R4

From Banana Pi Wiki
Revision as of 00:53, 25 September 2023 by Sinovoip (talk | contribs) (→‎Prepare to develop)
Jump to: navigation, search

Introduction

MediaTek MT7986(Filogic 830)

Key Features

Development

Basic Development

Prepare to develop

 * Prepare 8G/above TF card, USB-Serial cable, Ubuntu System
 * Using your USB-Serial cable Connect to debug console on BPI-R4

R4 DebugPort.png 

 * BPI-R4 bootstrap and device select Jumper Setting

R4-bootstrip.png 

  Note: SW3-A and SW3-B is for boot strap selecting;



  * Examples:
    All Jumper is Low: BPI-R4 will boot from SD card

 R4 SDBOOT.png



    All Jumper is Low.
    BPI-R3-Jumper-ALL-Low.png
Retrieved from "https://wiki.banana-pi.org/index.php?title=Getting_Started_with_BPI-R4&oldid=16004"