BPI LM75 Temperature Sensor Module

From Banana Pi Wiki

Revision as of 11:28, 14 May 2018 by Sinovoip (talk | contribs) (→Introduction)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Introduction

This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI.

Hardware

Hardware interface

Hardware Spec

GPIO Pin define

How to use

Resources

Retrieved from "https://wiki.banana-pi.org/index.php?title=BPI_LM75_Temperature_Sensor_Module&oldid=1550"