BPI LM75 Temperature Sensor Module

From Banana Pi Wiki

Revision as of 03:28, 14 May 2018 by Sinovoip (talk | contribs) (→‎Introduction)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Introduction
2 Hardware
3 How to use
4 Resources

Introduction

This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI.

Hardware

Hardware interface

Hardware Spec

GPIO Pin define

How to use

Resources

Retrieved from "https://wiki.banana-pi.org/index.php?title=BPI_LM75_Temperature_Sensor_Module&oldid=1550"