Banana Pi BPI-R3

Summary

Banana Pi BPI-R3 with MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53

Banana Pi BPI-R64 with MT7622

Introduction

Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard,It is a very high performance open source router development board,support Wi-Fi 6/6E 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port.

Application direction

• . Internet service Router
• . Wireless Router
• . Wireless Repeater
• . Home security Gateyway
• . Home Automation
• . Nas device
• . Network and communication applications

Key Features

• . MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design
• . Wifi 6/6E 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P)
• . 2G DDR RAM
• . 8G eMMC flash
• . 2 SFP 2.5GbE
• . 5 GbE network port
• . Mini PCIe via USB
• . M.2 KEY-E PCIe inerface
• . Mciro SD card interfact
• . 26 PIN GPIO

Hardware

Hardware spec

HardWare Specification of Banana pi BPI-R3
CPU	MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design
SDRAM	2 GB LPDDR3
On board Storage	MicroSD \(TF\) card,8GB eMMC onboard
GPIO	26 Pin GPIO,some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
On board Network	5 Port 10/100/1000Mbps Ethernet
SFP	2 SFP 2.5GbE
Wifi	Wifi 6/6E 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P)
mini PCIE	Mini PCIe via USB
M.2 interface	M.2 KEY-E PCIe inerface
USB	1 USB 3.0 host ,2 USB interface with slot.
Buttons	Reset button,WPS botton, boot switch
Leds	Power status Led and RJ45 Led
DC Power	12V/2A with DC in
Sizes	100.5x148mm same as Banana Pi BPI-R64 and Banana Pi BPI-R2
Weight	200g