Introduction

Banana Pi BPI-F2P

BPI-F2S with Heat sinks ,PoE module and RTC battery on board

BPI-F2S with F2S-SUB baord for 4G,Wifi,and SATA support

BPI-F2S back

Banana Pi BPI-F2S FPGA board

SunPlus SP7021 Diagram

SunPlus SP7021

Banana Pi BPI-F2P use Sunplus chip design, this is a industrial control board. use Plus1(sp7021) design same ase Banana Pi BPI-F2S, it support PoE function with PoE module,and support RS232 and RS485 . so you can use it do a Industrial control gateway.

Application direction

IoT/Industrial Internet control
Smart Audio
Smart Payment system
Vehicular networking technology and applications

about SunPlus SP7021

SunPlus sp7021 is a revolutionary SoC that has the power of a Linux-grade chip and the integration simplicity of a microcontroller.it with ARM Cortex-A7 Quad core,ARM926 real-time core,8051 low-power core

Conceived by Sunplus Technology in collaboration with Tibbo Technology, PLUS1 takes all the sophisticated elements typically found in modern industrial-grade embedded Linux chips, adds a plethora of features targeting IoT and industrial control applications, and delivers the resulting design in a simple microcontroller-like package that needs few external components, simplifies the schematic diagram, and reduces the PCB complexity.

SP7021 is a SoC solution of industrial control. It meets customers’full demand on function but with low cost so that will improve customers’ competitiveness in the market. SP7021 provides rich GPIOs, storage and USB interface. And it provides MIPI CSI interface for video input and HDMI interface for video output. It also provides FPGA interface for function extension. SP7021 also has 4 Ethernet ports providing customers a high competitive solution.

characteristics of the SP7021

Easy-to-use LQFP package.
Quad-core 1GHz Cortex-A7 CPU, plus A926 and 8051 cores.
Single 3.3V power*.
Integrated 128MB or 512MB DDR3 DRAM.
Eight 8-bit 5V-tolerant IO ports, plus one high-current port.
Flexible Peripheral Multiplexing (PinMux).
Dual PinMuxable Ethernet MACs.
Four PinMuxable Enhanced UARTs, plus one console UART.
Industrial operating temperature range: -40C ~ +85C.
Low EMI simplifies certification.
Modern, Yocto-based Linux distribution.
10-year supply guarantee.
Robust ready-to-run modern Linux distribution available
And much more...

Getting Start

Getting Started with BPI-F2P

Hardware

Hardware interface

the inner and outer diameter of the power plug adapter datasheet:https://drive.google.com/file/d/1k3AWmYOs2XE7lnRxCyytZu0Vpq_Bzcu_/view?usp=sharing

Hardware spec

SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM.
Storage – 8GB eMMC flash, microSD card slot
Video Output – HDMI 1.4 output
Camera I/F – MIPI CSI connector
Connectivity – 2x 10/100M Ethernet
USB – 2x USB 2.0 host ports, 1x micro USB port
Expansion

2 USB header interface

40-pin GPIO header compatible

7.4V Lithium battery power supply interface

RTC battery interface

PoE function support