Banana Pi BPI-F2S
Contents
Introduction
Banana Pi BPI-F2S is the first board with Banana Pi team and SunPlus, this is a industrial-grade board. use Plus1(sp7021) design.
Application direction
- IoT/Industrial Internet control
- Smart Audio
- Smart Payment system
- FPGA education and development
- Vehicular networking technology and applications
about SunPlus SP7021
SunPlus sp7021 is a revolutionary SoC that has the power of a Linux-grade chip and the integration simplicity of a microcontroller.it with ARM Cortex-A7 Quad core,ARM926 real-time core,8051 low-power core
Conceived by Sunplus Technology in collaboration with Tibbo Technology, PLUS1 takes all the sophisticated elements typically found in modern industrial-grade embedded Linux chips, adds a plethora of features targeting IoT and industrial control applications, and delivers the resulting design in a simple microcontroller-like package that needs few external components, simplifies the schematic diagram, and reduces the PCB complexity.
SP7021 is a SoC solution of industrial control. It meets customers’full demand on function but with low cost so that will improve customers’ competitiveness in the market. SP7021 provides rich GPIOs, storage and USB interface. And it provides MIPI CSI interface for video input and HDMI interface for video output. It also provides FPGA interface for function extension. SP7021 also has 4 Ethernet ports providing customers a high competitive solution.
characteristics of the SP7021
- Easy-to-use LQFP package.
- Quad-core 1GHz Cortex-A7 CPU, plus A926 and 8051 cores.
- Single 3.3V power*.
- Integrated 128MB or 512MB DDR3 DRAM.
- Eight 8-bit 5V-tolerant IO ports, plus one high-current port.
- Flexible Peripheral Multiplexing (PinMux).
- Dual PinMuxable Ethernet MACs.
- Four PinMuxable Enhanced UARTs, plus one console UART.
- Industrial operating temperature range: -40C ~ +85C.
- Low EMI simplifies certification.
- Modern, Yocto-based Linux distribution.
- 10-year supply guarantee.
- Robust ready-to-run modern Linux distribution available
- And much more...
Hardware
Hardware interface
note : 40 PIN GPIO compitable Raspberry Pi
Hardware spec
SOC education and training practice suite
SunPlus SP7021 development suite is a set of development platform with high integration of single chip based on sunplus 7021 SOC.With high performance, low Characteristics of power consumption;Embedded Linux Embed system, suitable for voice image processing, communication, portable industrial control equipment and other applications.With high performance processor, especially suitable for AI artificial intelligence, machine vision and other applications requiring strong computing power;Expandable FPGA module, can Layout, small board area, easy to field test application
Kit include
- 1. BPI-F2S sunplus board
- 2. FPGA baord: Xilinx Artix-7 XC7A100T,32 MByte QSPI Flash memory,power by single 3.3v
- 3. teaching sheet board : 4 digit 7 segment digital tube teaching,DIP8 socket for SPI flash IP authentication,8 LED lights are used for teaching
- 4. debug tooling
- 5. 12v/2A adapter
online documents：
Xilinx Artix-7 FPGA extend board
FPGA Module with Xilinx Artix-7 100T (Variant 2D), 2 x 50 Pin, 1.8V only supply
Now with the Trenz Electronic TE0725LP-01-100-2D is a low cost small-sized FPGA module integrating a Xilinx Artix-7 (15T-100T) and 32 MByte Flash memory for configuration and operation. The 2 x 50 pin headers with a 2.54 mm standard pitch are perfect for breadboard or low cost dual layer PCB.
Trenz HyperBus enabled reference designs are typically bundled with a FREE evaluation edition of the commercially proven, low-cost, low-circuit area, high performance, HyperBus Memory Controller (HBMC) IP supplied by Synaptic Laboratories Ltd. Synaptic Labs HBMC IP is commercially proven in both Intel and Xilinx projects, and was selected by Intel. This FREE HBMC IP evaluation license never expires, and no customer registration or NIC ID is required. You can check for and obtain the latest version of the FREE evaluation HBMC IP from S/Labs website for Xilinx and Intel.
Key Features:
- Xilinx Artix-7 XC7A100T-2CSG324C
- Commercial temperature grade (industrial on request)
- 32 MByte Flash memory
- 2 x 50 pin headers with 2.54 mm pitch, ideal for breadboard use
- 1.8 V single supply with on board voltage regulators
- 95 I/O's (42 + 42 + 3 + 8)
- 25 MHz system clock (100 MHz can be customized on request)
- I2C EEPROM
- 7.3 x 3.5 cm form factor
- JTAG/UART connector
- One user LED
- optional HyperRAM (8 bis 32 MByte) or HyperFlash
- HyperRAM from Cypress :http://www.cypress.com/products/hyperram-memory
- HyperFlash from Cypress http://www.cypress.com/products/hyperflash-nor-flash-memory
Software
Source code on github
- BPI-F2S BPS code with kernel 4.19 : https://github.com/BPI-SINOVOIP/BPI-F2S-bsp
Image
Fedora-Mate
- Banana Pi BPI-F2S setup & run fedora 31 (u-boot-2019.04 + kernel 4.19.37)
- file name: 2019-11-14-Fedora-Mate-armhfp-31-1.9-sda.raw.xz-bpi-f2s-sd-emmc.img.zip
- google download : https://drive.google.com/open?id=1ATHmvKvYoBpM3uyQ2xK4pvKahlgCGHnq
- discuss on forum: http://forum.banana-pi.org/t/bpi-f2s-new-image-fedora-mate-armhfp-31-1-9-sda-raw-xz-bpi-f2s-sd-emmc-img-2019-11-15/10206
- boot logfile: https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/2019-11-14-Fedora-Mate-armhfp-31-1.9-sda.raw.xz-bpi-f2s-sd-emmc.img.txt
- readme:https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/readme.txt
Resources
- PLUS1 SP7021 Datasheet : https://drive.google.com/file/d/1MWFwgHMteMKVxgzyK5ClU9LOyh-M8xPA/view?usp=sharing
- SP7021 Released Document :https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
- FPGA TRM-TE0725LP-01_usermanual https://drive.google.com/file/d/1yKsbKSc2VSZgkFH_Oezm_75lD5un8MMT/view?usp=sharing
- Banana Pi BPI-F2S setup & run fedora 31 (u-boot-2019.04 + kernel 4.19.37)
