BPI-CC2650 Zigbee BT Linaro 96Boars
BPI NB-IoT Linaro 96Boars with Quecte BC95 module developent board
Contents
Introduction
BPI-CC2650 Linaro 96Boars with TI CC2650 chip design developent board ，this is a Linaro 96Board standard development board.The CC2650 device is a wireless MCU for Bluetooth Smart ZigBee and 6LoWPAN, as well as ZigBee RF4CE remote control applications
1.BPI-CC2650 module:
- TI CC2650 chip design with Bluetooth4.2,ZigBee and 6LoWPAN
- TI CC2640 chip design with Bluetooth4.2 and Bluetooth 5
- TI CC2630 6LoWPAN, ZigBee
- Linaro 96Board standard
Hardware
Hardware inerface
Harware spec
| HardwareSpecification of BPi-CC2650 | |||
| Soc | TI CC2650 (option:CC2640 CC2630) | ||
| CPU | ARM Cortex™-M3 CPU | ||
| SDRAM size | 20 KB of ultralow-Leakage SRAM, 8KB of SRAM for Cache | ||
| Flash size | 128KB | ||
| Power | 5V/2A via MicroUSB / 3.7V via Battery Connector | ||
| Low-level peripherals | 40 Pins Header \(2.0mm Pitch\), 32×GPIOs,Some of which can be used for specific functions including UART, I2C, SPI, PWM | ||
| On board Network | Zigbee, BT4.2 | ||
| micro USB | 1 micro USB to Uart for debug | ||
| Buttons | Reset button, User button | ||
| Leds | 1 Power status Led and 4 other Leds | ||
| Sizes | 60mm×30mm | ||
| Weight | 10g | ||
GPIO PIN define
| BPI-CC2650 40PIN GPIO (CON2) | |||
| GPIO Pin Name | Default Function | ||
| CON2-P01 | GND | ||
| CON2-P02 | GND | ||
| CON2-P03 | DIO_29 | ||
| CON2-P04 | Power_EN | ||
| CON2-P05 | DIO_1 BLE_TX | ||
| CON2-P06 | nRESET | ||
| CON2-P07 | DIO_2 BLE_RX | ||
| CON2-P08 | DIO_28 | ||
| CON2-P09 | DIO_27 | ||
| CON2-P10 | DIO_26 | ||
| CON2-P11 | DIO_1 BLE_TX | ||
| CON2-P12 | DIO_25 | ||
| CON2-P13 | DIO_2 BLE_RX | ||
| CON2-P14 | DIO_24 | ||
| CON2-P15 | DIO_23 | ||
| CON2-P16 | DIO_22 | ||
| CON2-P17 | DIO_21 | ||
| CON2-P18 | DIO_20 | ||
| CON2-P19 | DIO_19 | ||
| CON2-P20 | DIO_18 | ||
| CON2-P21 | DIO_15 | ||
| CON2-P22 | DIO_14 | ||
| CON2-P23 | DIO_13 | ||
| CON2-P24 | DIO_12 | ||
| CON2-P25 | DIO_11 | ||
| CON2-P26 | DIO_10 | ||
| CON2-P27 | DIO_9 | ||
| CON2-P28 | DIO_8 | ||
| CON2-P29 | DIO_7 | ||
| CON2-P30 | DIO_6 | ||
| CON2-P31 | DIO_5 | ||
| CON2-P32 | DIO_4 | ||
| CON2-P33 | DIO_3 | ||
| CON2-P34 | DIO_0 | ||
| CON2-P35 | VCC_1.8V | ||
| CON2-P36 | NC | ||
| CON2-P37 | VCC_5V | ||
| CON2-P38 | NC | ||
| CON2-P39 | GND | ||
| CON2-P40 | GND | ||
2xSSI，I2C，I2S，UART； All Digital Peripheral Pins Can Be Routed to Any GPIO
| BPI-CC2650 UART(CON1) | |||
| CON1-P1 | GND | ||
| CON1-P2 | BLE_RX | ||
| CON1-P3 | BLE_TX | ||
| BPI-CC2650 TI JTAG(CN3) | |||
| CSI Pin Name | Default Function | ||
| CN3-P1 | JTAG_TCK | ||
| CN3-P2 | GND | ||
| CN3-P3 | JTAG TDO | ||
| CN3-P4 | VDDS | ||
| CN3-P5 | JTAG_TMS | ||
| CN3-P6 | nRESET | ||
| CN3-P7 | NC | ||
| CN3-P8 | NC | ||
| CN3-P9 | JTAG TDI | ||
| CN3-P10 | GND | ||
Resources
Source code
Documents
- TI CC2650 official website: http://www.ti.com/product/CC2650?keyMatch=CC2650&tisearch=Search-EN-Everything
- TI CC2650 datasheet: https://drive.google.com/file/d/1-RSfXwizV6Iwwb-U1EYFWrfGiPMA4ynl/view?usp=sharing
- TI CC2630 datasheet: https://drive.google.com/file/d/1aCdC7vZ23vWKjidY69ZgiNrYTTMbSBt1/view?usp=sharing
