Getting Started with R2

From Banana Pi Wiki
Revision as of 01:39, 5 May 2018 by JackZengWiki (talk | contribs) (→‎Prepare to develop)
Jump to: navigation, search

Introduction

The Banana Pi R2 is a router based development board, which can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. It has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.

Key Features

  • MediaTek MT7623N, Quad-core ARM Cortex-A7
  • Mali 450 MP4 GPU
  • 2G DDR3 SDRAM
  • Mini PCIE interface
  • SATA interface
  • 4x Gigabit LAN 1x Gigabit WAN

Hardware

R2.jpg

Development

Let's get start to develop on BPI-R2, see amazing things happen.

Basic Development

Prepare to develop

# Using your USB-Serial Connect debug console on R2 [[Image:R2_debug_console.png|right|160px]

Load your first image on R2

Build your own image on R2

Advanced Development

Develop 4G module with R2

Wifi and Ap mode on R2

FAQ

Reference Link

http://www.banana-pi.org/r2.html

Retrieved from "https://wiki.banana-pi.org/index.php?title=Getting_Started_with_R2&oldid=99"