Banana Pi BPI-F2
Contents
Introduction
Banana Pi BPI-F2 use freescale IMX6 Industrial chip design. IMX6 with ARM Cortex-A9 MPCore 4xCPU processor(with TrustZone),this is ths first banana pi board design with freescale chip.
Key Features
- freescale IMX6 Industrial solutions.
- 2G DDR3 and 8G eMMC flash
- CAN bus function support
- Mini PCIE interface
- 2 camera interface:DVP and MIP
Getting Start
Hardware
Hardware interfact
Hardware spec
| HardWare Specification of Banana pi BPI-F2 | |||
| Soc | freescale IMX6 | ||
| CPU | ARM Cortex-A9 MPCore 4xCPU processor(with TrustZone) | ||
| GPU | OpenGL ES 2.0 3D graphics accelerator with forshaders,2D graphics accelerator,and didicated OpenVG 1.1 accelerator | ||
| SDRAM | 2G DDR3 | ||
| PCIE | 1 mini PCIE interface | ||
| CAN bus | 1 CAN bus interface | ||
| SATA | support 1*SATA interface | ||
| GPIO | 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
| On board Network | 10/100/1000 Mbit/s Ethernet | ||
| Wifi Module | N/A | ||
| Bluetooth | N/A | ||
| On board Storage | MicroSD \(TF\) card,8G eMMC onboard (option 8-64G) | ||
| Display | HDMI out, LVDS out | ||
| Video | HDMI out, LVDS out | ||
| Audio outputs | 1 * 3.5 headset jack | ||
| Camera | 1 * DVP camera interface and 1* MIP camera interface | ||
| Audio input | N/A | ||
| USB | 2 * USB 2.0 1* USB Otg | ||
| Buttons | Power & Reset | ||
| Leds | 3* RGB leds | ||
| IR | N/A | ||
| DC Power | 12V/2A with DC port | ||
| battery | No 3.7V lithium battery power support | ||
| Sizes | |||
| Weight | 80g | ||
IMX.6 wiki page : https://en.wikipedia.org/wiki/I.MX#i.MX_6_series
