Using 4G module with BananaPi

From Banana Pi Wiki
Revision as of 05:33, 10 May 2018 by Sinovoip (talk | contribs) (How to use BPI-4G LTE module with BPI-R2)
Jump to: navigation, search

How to use BPI-4G LTE module with BPI-R2

Usb 4g 1.jpg

1.Firstly, use R2 connects LTE module by USB or 14pin Headers. then execute command "lsusb" to have a look if R2 have drove the module. The red box is the id of 4G module. Usb 4g 2.PNG After seeing this, execute command "ls /dev/ttyUSB*" to make sure the 4G module have been recognised as USB devs. Usb 4g 3.PNG

2. Execute the "./ppp1.sh &" Usb 4g 4.PNG