Difference between revisions of "Banana Pi BPI-F2"
(→Hardware spec) |
(→Hardware spec) |
||
| Line 28: | Line 28: | ||
| GPIO || 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | | GPIO || 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
|- | |- | ||
| − | | On board Network || | + | | On board Network || |
|- | |- | ||
| Wifi Module || | | Wifi Module || | ||
Revision as of 23:13, 23 July 2018
Contents
Introduction
Key Features
Getting Start
Hardware
Hardware interfact
Hardware spec
| HardWare Specification of Banana pi BPI-F2 | |||
| Soc | with freescale IMX6 | ||
| CPU | |||
| GPU | |||
| SDRAM | |||
| SATA | support 1*SATA interface | ||
| GPIO | 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
| On board Network | |||
| Wifi Module | |||
| Bluetooth | |||
| On board Storage | MicroSD \(TF\) card,8G eMMC onboard (option 8-64G) | ||
| Display | |||
| Video | |||
| Audio outputs | |||
| Camera | |||
| Audio input | |||
| USB | |||
| Buttons | |||
| Leds | |||
| IR | No onboard IR receiver | ||
| DC Power | 5V/2A with micro USB port | ||
| battery | No 3.7V lithium battery power support | ||
| Sizes | |||
| Weight | 80g | ||
