Difference between revisions of "IR remote control"
(Created page with "=BPI IR remote control= we have test this IR remote control on banana pi .so you can use it control your BPI.  == key code define== {| class="wikitable" |-...") |
(No difference)
|
Revision as of 20:03, 16 May 2018
BPI IR remote control
we have test this IR remote control on banana pi .so you can use it control your BPI.
key code define
| IR key code define' | |||
| key code: | function | function | |
| key 22 | MUTE | WAKE | |
| key 10 | POWER | WAKE | |
| key 65 | APPS | WAKE | |
| key 67 | SETTINGS | WAKE | |
| key 25 | HOME | WAKE | |
| key 16 | DPAD_LEFT | WAKE_DROPPED | |
| key 17 | DPAD_RIGHT | WAKE_DROPPED | |
| key 11 | DPAD_UP | WAKE_DROPPED | |
| key 14 | DPAD_DOWN | WAKE_DROPPED | |
| key 13 | DPAD_CENTER | WAKE_DROPPED | |
| key 64 | MOUSE | WAKE | |
| key 24 | BACK | WAKE_DROPPED | |
| key 83 | VOLUME_DOWN | WAKE | |
| key 91 | VOLUME_UP | WAKE | |
How to use
BPI-M2+ keycode:
IR Address: 4040
1.how to do check IR address on Android.
echo 0xff > /sys/module/sunxi_ir_rx/parameters/debug_mask
<7>[ 625.998452] IR code = 0xf20d4040 <7>[ 625.998473] IR RAW CODE : 13 <7>[ 625.998542] IR CODE : 13 <7>[ 625.998629] IR KEY VALE 13 <7>[ 625.998653] ir_rx_irq_service: Rx Packet End, code=0xf20d4040, ir_code=0x <6>[ 625.998717] cpus_wakeup_config_handler: address: 0x4040, powerkey: 0x0a <6>[ 626.002717] cpus_wakeup_config_handler: ok
demo IR remote control on youtube:
https://www.youtube.com/watch?v=HhW_G85Byio&feature=youtu.be
