Difference between revisions of "Getting Started with BPI-R4"

From Banana Pi Wiki
Jump to: navigation, search
(Created page with "==Introduction== ==MediaTek MT7986(Filogic 830)== ==Key Features== =Development= ==Basic Development== ===Prepare to develop=== * Prepare 8G/above TF card, USB-Serial...")
(No difference)

Revision as of 00:40, 25 September 2023

Introduction

MediaTek MT7986(Filogic 830)

Key Features

Development

Basic Development

Prepare to develop

 * Prepare 8G/above TF card, USB-Serial interface, Ubuntu System
 * Using your USB-Serial Connect debug console on BPI-R3

 R3 debug console.jpg

 * R3 bootstrap and device select Jumper Setting
 BPI-R3-Jumper.png

  Note: SW1-A and SW1-B is for boot strap selecting;
        SW1-C is that SPI-Nand or SPI-Nor Device is connected to CPU's SPI bus;
        SW1-D is that SD Card or EMMC device is connected tp CPU's EMMC bus.

  * Examples:
    All Jumper is High.
    BPI-R3-Jumper-ALL-High.png

    All Jumper is Low.
    BPI-R3-Jumper-ALL-Low.png
Retrieved from "https://wiki.banana-pi.org/index.php?title=Getting_Started_with_BPI-R4&oldid=15996"