BPI LM75 Temperature Sensor Module: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Introduction= | =Introduction= | ||
This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI. | This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI. | ||
==Key == | |||
*1. 11bit high resolution ADC in chip | |||
*2. temperature resolution of 0.125°C. | |||
*3. Connect through I2C bus | |||
==Typical Application：== | |||
*1. Industrial controllers | |||
*2. Environmental monitoring | |||
*3. Smart home | |||
*4. Interactive devices | |||
=Hardware= | =Hardware= | ||
Revision as of 11:30, 14 May 2018
Introduction
This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI.
Key
- 1. 11bit high resolution ADC in chip
- 2. temperature resolution of 0.125°C.
- 3. Connect through I2C bus
Typical Application：
- 1. Industrial controllers
- 2. Environmental monitoring
- 3. Smart home
- 4. Interactive devices