Difference between revisions of "BPI-Nano robot board"
(→Hardware) |
(→Technical specifications) |
||
| Line 20: | Line 20: | ||
*Pin for motor drive: pin4/5/6/7 (Arduino controller) | *Pin for motor drive: pin4/5/6/7 (Arduino controller) | ||
*Size: 56x57mm | *Size: 56x57mm | ||
| + | |||
| + | ==Hardware interface== | ||
=Software= | =Software= | ||
Revision as of 23:22, 28 September 2019
Overview
This robot board is design for Arduino Nano and Nano compatible boards. It is designed by Harsh Dethe and made by BPI factory.
BPI-Nano robot boards motor drive expansion plate available in the bpi-nano controller supports dual-circuit motor control, with single maximum current up to 1A.
Arduino standard pin design interface, also can be used with Arduino Nano.It can be applied to the development of small mobile robot.
Hardware
Technical specifications
- Driver chip: L293B
- Logical working voltage: 5V DC
- Motor drive voltage: 7-12v DC
- Maximum driving current: 1A (per circuit)
- Pin for motor drive: pin4/5/6/7 (Arduino controller)
- Size: 56x57mm
