Revision as of 03:34, 8 May 2018

Hardware Specification

The camera V3 module is specifically designed for BPi-M3.It include two CMOS sensor module, one is OV5640(5M Pixel),and the other is OV8865(8M Pixel),so you can choose one or two campera for this board.

Hardware

camera can support 2 scene. one is OV5640 and one is OV8865

Hardware interface

cable line

Schematic diagram

How to use

Connect the camera module and BPi-M3 with a 40PIN FFC cable, like the pictures below :

BPI-M2+ support OV5640 camera module

note: for BPI-M2+ , camera is not same as BPI-M2,BPI-M1.... , it support OV5640 module, not need extend board. you just can direct use OV5640 modue on CSI interface.

if you have BPI-M1/M1+/M2 camera module ,you can remove camera module from extend bard ,and can use on BPI-M2+.