|
|
| Line 1: |
Line 1: |
| [[en:Getting_Started_with_R1]]
| |
|
| |
|
| =Introduction=
| |
| ==BPI-R1==
| |
| [[File:R1_bananian.png|thumb|Overview: BPI-R1 bananian linux]]
| |
|
| |
| The Banana Pi R1 is a router based Banana Pi running on the same SoC as the M1 Classic Pi.
| |
| The R1 is a open hardware router that can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. The R1 has slim router form factor with a bay for 2.5" HDDs. It also has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.
| |
|
| |
| *Read more about : [[Banana Pi BPI-R1]]
| |
|
| |
| ===Key Features===
| |
| * Dual-core 1.0GHz CPU
| |
| * 1 GB DDR3 memory
| |
| * Mali-400 MP2 with Open GL ES 2.0/1.1
| |
| * 4x Gigabit LAN 1x Gigabit WAN
| |
|
| |
| =Development=
| |
| ==Basic Development==
| |
| ===Prepare to develop===
| |
| * Prepare 16G/above TF card, USB-Serial interface, Ubuntu System
| |
| * Using your USB-Serial Connect debug console on R1
| |
|
| |
| [[Image:R1_debug_console.png|240px]]
| |
|
| |
| [[Image:R1_DC_IN.png|240px]]
| |
|
| |
| ===Load your first image on R1===
| |
| 1.You could download latest image from our forum
| |
|
| |
| 2.Install bpi-tools on your Ubuntu
| |
| * apt-get install pv
| |
| * curl -sL https://github.com/BPI-SINOVOIP/bpi-tools/raw/master/bpi-tools | sudo -E bash
| |
|
| |
| 3.After you download the image, insert your TF card into your Ubuntu
| |
| * Execute "bpi-copy xxx.img /dev/sdx" to install image on your TF card
| |
|
| |
| 4.After step 3, then you can insert your TF card into R1, and press power button setup R1
| |