Banana Pi BPI-F2: Difference between revisions
Jump to navigation
Jump to search
| Line 22: | Line 22: | ||
| GPU || | | GPU || | ||
|- | |- | ||
| SDRAM || | | SDRAM || 2G DDR3 | ||
|- | |||
| PCIE|| 1 mini PCIE interface | |||
|- | |- | ||
| SATA || support 1*SATA interface | | SATA || support 1*SATA interface | ||
| Line 28: | Line 30: | ||
| GPIO || 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | | GPIO || 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
|- | |- | ||
| On board Network || | | On board Network ||10/100/1000M | ||
|- | |- | ||
| Wifi Module || | | Wifi Module || N/A | ||
|- | |- | ||
| Bluetooth || | | Bluetooth || N/A | ||
|- | |- | ||
| On board Storage || MicroSD \(TF\) card,8G eMMC onboard (option 8-64G) | | On board Storage || MicroSD \(TF\) card,8G eMMC onboard (option 8-64G) | ||
|- | |- | ||
| Display || | | Display || HDMI out, LVDS out | ||
|- | |- | ||
| Video || | | Video || HDMI out, LVDS out | ||
|- | |- | ||
| Audio outputs || | | Audio outputs || 1 * 3.5 headset jack | ||
|- | |- | ||
| Camera || | | Camera || 1 * DVP camera interface and 1* MIP camera interface | ||
|- | |- | ||
| Audio input || | | Audio input || N/A | ||
|- | |- | ||
| USB || | | USB || 2 * USB 2.0 | ||
|- | |- | ||
| Buttons || | | Buttons || Power & Reset | ||
|- | |- | ||
| Leds || | | Leds || 3* RGB leds | ||
|- | |- | ||
| IR || | | IR || N/A | ||
|- | |- | ||
| DC Power || | | DC Power || 12V/2A with DC port | ||
|- | |- | ||
| battery || No 3.7V lithium battery power support | | battery || No 3.7V lithium battery power support | ||
Revision as of 07:18, 24 July 2018
Introduction
Key Features
Getting Start
Hardware
Hardware interfact
Hardware spec
| HardWare Specification of Banana pi BPI-F2 | |||
| Soc | with freescale IMX6 | ||
| CPU | |||
| GPU | |||
| SDRAM | 2G DDR3 | ||
| PCIE | 1 mini PCIE interface | ||
| SATA | support 1*SATA interface | ||
| GPIO | 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
| On board Network | 10/100/1000M | ||
| Wifi Module | N/A | ||
| Bluetooth | N/A | ||
| On board Storage | MicroSD \(TF\) card,8G eMMC onboard (option 8-64G) | ||
| Display | HDMI out, LVDS out | ||
| Video | HDMI out, LVDS out | ||
| Audio outputs | 1 * 3.5 headset jack | ||
| Camera | 1 * DVP camera interface and 1* MIP camera interface | ||
| Audio input | N/A | ||
| USB | 2 * USB 2.0 | ||
| Buttons | Power & Reset | ||
| Leds | 3* RGB leds | ||
| IR | N/A | ||
| DC Power | 12V/2A with DC port | ||
| battery | No 3.7V lithium battery power support | ||
| Sizes | |||
| Weight | 80g | ||