Difference between revisions of "BPI LM75 Temperature Sensor Module"
(→Introduction) |
(→Introduction) |
||
| Line 1: | Line 1: | ||
=Introduction= | =Introduction= | ||
This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI. | This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI. | ||
| + | |||
| + | ==Key == | ||
| + | *1. 11bit high resolution ADC in chip | ||
| + | *2. temperature resolution of 0.125°C. | ||
| + | *3. Connect through I2C bus | ||
| + | |||
| + | ==Typical Application：== | ||
| + | *1. Industrial controllers | ||
| + | *2. Environmental monitoring | ||
| + | *3. Smart home | ||
| + | *4. Interactive devices | ||
=Hardware= | =Hardware= | ||
Revision as of 03:30, 14 May 2018
Contents
Introduction
This module is designed specifically for the Banana Pi. The module use the NXP LM75 Temperature chip. The temperature register always stores an 11-bit 2's complement data giving atemperature resolution of 0.125°C. The module use I2C bus to connect to Banana PI.
Key
- 1. 11bit high resolution ADC in chip
- 2. temperature resolution of 0.125°C.
- 3. Connect through I2C bus
Typical Application：
- 1. Industrial controllers
- 2. Environmental monitoring
- 3. Smart home
- 4. Interactive devices
