Difference between revisions of "Banana Pi Series Comparison"
| Line 5: | Line 5: | ||
|module||BPI-M1||BPI-M1+||BPI-M2+||BPI-M2 Magic||BPI-M2 Berry||BPI-M2 Ulra||BPI-M3||BPI-M64||BPI-M3 | |module||BPI-M1||BPI-M1+||BPI-M2+||BPI-M2 Magic||BPI-M2 Berry||BPI-M2 Ulra||BPI-M3||BPI-M64||BPI-M3 | ||
|- | |- | ||
| − | |photo|| | + | |photo|||||||||||||||||| |
|- | |- | ||
|CPU || H2+ Quad-core Cortex-A7 H265/HEVC 1080P | |CPU || H2+ Quad-core Cortex-A7 H265/HEVC 1080P | ||
Revision as of 18:20, 11 May 2018
| Banana Pi Single board computer Comparison | |||||||||
| module | BPI-M1 | BPI-M1+ | BPI-M2+ | BPI-M2 Magic | BPI-M2 Berry | BPI-M2 Ulra | BPI-M3 | BPI-M64 | BPI-M3 |
| photo | |||||||||
| CPU | H2+ Quad-core Cortex-A7 H265/HEVC 1080P | ||||||||
| GPU | Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0 | ||||||||
| Memory \(SDRAM\) | 512M \(shared with GPU\) | ||||||||
| Onboard Storage | TF card \(Max. 64GB\) | ||||||||
| Onboard Network | NOPE | ||||||||
| Onboard WIFI | SDIO AP6212（option AP6181、AP6335） | ||||||||
| Video Input | A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL,3 Supports SM pixel camera sensor ,4 Supports video capture solution up to 1080p@30fps | ||||||||
| Video Outputs | Supports Mini HDMI Port | ||||||||
| Audio Output | Mini HDMI | ||||||||
| Power Source | Micro USB with 5V/2A | ||||||||
| USB 2.0 Ports | one USB 2.0 OTG | ||||||||
| Buttons | Power Button, Reset Button | ||||||||
| Low-level peripherals | 40 Pins Header,compatible with Raspberry Pi 3 | ||||||||
| uart GPIO\(1x3\) pin | UART, ground | ||||||||
| LED | Power led & Status led | ||||||||
| IR | nope | ||||||||
| Supported OS | Android, Ubuntu, Debian, Rasberry Pi Image | ||||||||
| Product size | 65mm × 30mm | ||||||||
| Weight | 35g | ||||||||
