Difference between revisions of "香蕉派 BPI-M4"
(→Getting Start) |
(→参考文档) |
||
(17 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | [[en:Banana_Pi_BPI-M4]] | ||
=产品介绍= | =产品介绍= | ||
Line 6: | Line 7: | ||
[[File:Banana_Pi_BPI-M4_PCIE.JPG|thumb|M.2 and PCIE support]] | [[File:Banana_Pi_BPI-M4_PCIE.JPG|thumb|M.2 and PCIE support]] | ||
− | Banana Pi BPI-M4 | + | Banana Pi BPI-M4 4核64位开发板,采用RTD1395芯片设计 ,为banana pi 团队最新的Banana Pi BPI-M4具有与Raspberry Pi Model B 一样的尺寸,但搭载更强悍的Realtek RTD1395 SoC,并支援PoE网路线供电与M.2插槽等功能,使用上更具弹性。 |
[[File:Banana_Pi_BPI-M4.jpg]] | [[File:Banana_Pi_BPI-M4.jpg]] | ||
− | + | Banana Pi BPI-M4搭载Realtek RTD1395 SoC,具有4个64bit的A53处理器核心,以及Mali-470 MP4绘图处理器,在记忆体部分具有1GB或2GB DDR4记忆体版本可供选择,储存装置除了可以选择8GB至64GB eMMC之外,也能透过micro SD插槽扩充256GB以下记忆卡。BPI-M4 I/O接口则有支援1080p输出的HDMI端子、3.5mm音源输出端子、RJ-45有线网路端子(100Mbps)、WiFi 5(IEEE 802.11 b/g/n/ac)、蓝牙4.2、4组USB2.0端子、1组USB2.0 Type-C端子,以及相容于Raspberry Pi 的40 Pin Header,其中28Pin为相容UART、I2C、SPI、PWM的GPIO,其于为+5V、+3.3V、GND电源端子。比较特别的是BPI-M4还有1组M.2 Key E扩充插槽,支援PCIe 2.0与USB 2.0传输规范,能够扩充网路介面卡等设备。 | |
Line 21: | Line 22: | ||
*USB 2.0 TYPE C | *USB 2.0 TYPE C | ||
*M.2 Key E slot PCIE 2.0 and USB 2.0 | *M.2 Key E slot PCIE 2.0 and USB 2.0 | ||
− | *PoE | + | *PoE 网络供电功能支持 |
==开发== | ==开发== | ||
[[Getting Started with M4]] | [[Getting Started with M4]] | ||
− | = | + | =硬件= |
− | == | + | ==硬件接口示意== |
[[File:Banana_Pi_BPI-M4__interface.JPG]] | [[File:Banana_Pi_BPI-M4__interface.JPG]] | ||
− | == | + | ==硬件规格== |
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | | style="background: PaleTurquoise; color: black" colspan="4"| ''' | + | | style="background: PaleTurquoise; color: black" colspan="4"| '''Banana pi BPI-M4 硬件规格列表''' |
|- | |- | ||
− | | | + | |主控芯片|| Realtek RTD1395 ARM Cortex-A53 Quad-Core 64 Bit |
|- | |- | ||
− | | | + | | GPU图形||Mali 470 MP4 GPU OpenGL ES 1.1/2.0 |
|- | |- | ||
− | | | + | | 内存|| 1 GB DDR4 (option 2 GB) |
|- | |- | ||
| Storage|| MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB | | Storage|| MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB | ||
|- | |- | ||
− | | | + | | 网络|| 10/100 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n/AC + Bluetooth 4.2 |
|- | |- | ||
|Video Output(s)|| HDMI port and multi-channel audio output support 1080P H.264 H.265 2K/4K | |Video Output(s)|| HDMI port and multi-channel audio output support 1080P H.264 H.265 2K/4K | ||
Line 67: | Line 68: | ||
|} | |} | ||
− | ==GPIO | + | ==GPIO 引脚定义 == |
Banana Pi BPI-M4 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout: | Banana Pi BPI-M4 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout: | ||
Line 176: | Line 177: | ||
|- | |- | ||
|} | |} | ||
+ | *Banana Pi BPI-M4: How to get I2C and SPI running (tutorial):https://forum.banana-pi.org/t/banana-pi-bpi-m4-how-to-get-i2c-and-spi-running-tutorial/12824/6 | ||
− | = | + | =资源文档= |
− | == | + | ==源代码== |
− | === | + | ===Android系统=== |
− | === | + | ===Linux系统=== |
*Supports Banana Pi BPI-M4 (RTD1395) (Kernel 4.9.119) | *Supports Banana Pi BPI-M4 (RTD1395) (Kernel 4.9.119) | ||
::Source code on github: https://github.com/BPI-SINOVOIP/BPI-M4-bsp | ::Source code on github: https://github.com/BPI-SINOVOIP/BPI-M4-bsp | ||
− | == | + | == 参考文档== |
− | *BPI-M4 | + | *BPI-M4 硬件原理图: |
::google driver:https://drive.google.com/file/d/1A6pj8Y9Ru1_qfMapIdiQnMavEs5xzN5H/view?usp=sharing | ::google driver:https://drive.google.com/file/d/1A6pj8Y9Ru1_qfMapIdiQnMavEs5xzN5H/view?usp=sharing | ||
::Baidu cloud:https://pan.baidu.com/s/1mnn51dwBV5uxpNheBD4vJA pincode: t6cd | ::Baidu cloud:https://pan.baidu.com/s/1mnn51dwBV5uxpNheBD4vJA pincode: t6cd | ||
Line 197: | Line 199: | ||
*Banana Pi BPI-M4 digital photo download:https://drive.google.com/file/d/1lD9vOhdZMqHFilTPPHY80My0biszvW8r/view?usp=sharing | *Banana Pi BPI-M4 digital photo download:https://drive.google.com/file/d/1lD9vOhdZMqHFilTPPHY80My0biszvW8r/view?usp=sharing | ||
*BPI-M4 SBC bench test :http://forum.banana-pi.org/t/bpi-m4-sbc-bench-test/9469 | *BPI-M4 SBC bench test :http://forum.banana-pi.org/t/bpi-m4-sbc-bench-test/9469 | ||
+ | *Banana pi BPI-M4: m.2 extension board with nvme ssd : http://forum.banana-pi.org/t/bpi-m4-m-2-extension-board-with-nvme-ssd/11999 | ||
+ | *Banana Pi BPI-M4 Review: https://www.magazinmehatronika.com/en/banana-pi-m4-review/ | ||
+ | *BPI-M4 USB host dying (uvcvideo and usb rtl8821cu) (solution):https://forum.banana-pi.org/t/bpi-m4-usb-host-dying-uvcvideo-and-usb-rtl8821cu-solution/13210 | ||
+ | *Banana Pi BPI-M4: How to get I2C and SPI running (tutorial):https://forum.banana-pi.org/t/banana-pi-bpi-m4-how-to-get-i2c-and-spi-running-tutorial/12824 | ||
=Image Release= | =Image Release= | ||
==Android == | ==Android == | ||
+ | |||
+ | *2020-5-18 update, Android 8.1 with kernel 4.9.119. | ||
+ | ::[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/?p=%2FImages%2FBPI-M4%2Fandroid8&mode=list Download Android 8.1 image] | ||
+ | |||
+ | ::[http://wiki.banana-pi.org/Getting_Started_with_M4#Install_Android How to install the Android 8.1 image] | ||
+ | |||
+ | ::'''Note: Starting with this release, BPI-M4 Android8 image is only support 2GB ddr board because 1GB ddr is not stable and smooth for Android8''' | ||
+ | |||
*2019-6-25 update ,This release is for BPI-M4 which is based on rtd1395,Image is Android 8.1.0 with kernel 4.9.119. | *2019-6-25 update ,This release is for BPI-M4 which is based on rtd1395,Image is Android 8.1.0 with kernel 4.9.119. | ||
::Features Map:http://wiki.banana-pi.org/M4_Image_Map#Android_8.1_HDMI | ::Features Map:http://wiki.banana-pi.org/M4_Image_Map#Android_8.1_HDMI | ||
− | + | ||
− | |||
::For detail steps please see here:http://wiki.banana-pi.org/Getting_Started_with_M4#Install_Android | ::For detail steps please see here:http://wiki.banana-pi.org/Getting_Started_with_M4#Install_Android | ||
::Forum pthread:http://forum.banana-pi.org/t/bpi-m4-android-8-1-demo-image-release-2019-06-25/9401 | ::Forum pthread:http://forum.banana-pi.org/t/bpi-m4-android-8-1-demo-image-release-2019-06-25/9401 | ||
==Ubuntu linux== | ==Ubuntu linux== | ||
+ | |||
+ | Ubuntu Mate 18.04, Ubuntu Server 16.04, Raspbian Stretch | ||
+ | * 2020-05-18 update, Kernel 4.9.119 | ||
+ | ::[https://download.banana-pi.dev/d/3ebbfa04265d4dddb81b/?p=%2FImages%2FBPI-M4%2Flinux&mode=list Download Image] | ||
+ | ::[http://wiki.banana-pi.org/Getting_Started_with_M4#Install_Linux_Image_On_M4 How to Install Image] | ||
+ | |||
+ | |||
* 2019-6-18 update,This release is for banana pi M4 & W2 board, and it is based on Ubuntu Mate 18.04 & Ubuntu Server 16.04 Operation system with kernel 4.9.119. | * 2019-6-18 update,This release is for banana pi M4 & W2 board, and it is based on Ubuntu Mate 18.04 & Ubuntu Server 16.04 Operation system with kernel 4.9.119. | ||
::BPI-M4/BPI-W2 Ubuntu Mate 18.04 | ::BPI-M4/BPI-W2 Ubuntu Mate 18.04 | ||
Line 224: | Line 244: | ||
==Debian linux== | ==Debian linux== | ||
+ | *2019-08-13 update BPI-M4/BPI-W2 Debian10 Buster Desktop New Demo Image ,This release is for banana pi M4 and W2 board, and it is based on Debian 10 Operation system with kernel 4.9.Debian 10 buster desktop(32bit) | ||
+ | ::Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Debian_10_buster | ||
+ | ::Google Drive : https://drive.google.com/open?id=1rVrZStsw2PINBhIxCzOLOtYLbtoECmEk | ||
+ | ::Baidu Drive : https://pan.baidu.com/s/1WcrBkxm5OyBLedCBwaUz6Q (PinCode:e6m3) | ||
+ | ::MD5 : 300b37cdfa092d72dceddd4f33825b40 | ||
+ | ::Forum Pthread:http://forum.banana-pi.org/t/bpi-m4-bpi-w2-debian10-buster-desktop-new-demo-image-20190813/9712 | ||
+ | ::FAQ | ||
+ | ::::Issue: if HDMI doesn’t display, please try “ctrl + alt + F1” to change terminal then “ctrl + alt + F7” change to desktop display. | ||
+ | ::::SW2: switch to 0,if insert SD, SD start;if doesn’t insert SD,EMMC start. | ||
* 2019-08-06 update,BPI-M4/BPI-W2 Debian 10 Buster Lite Demo Image ,This release is for banana pi M4 and W2 board, and it is based on Debian 10 Operation system with kernel 4.9. | * 2019-08-06 update,BPI-M4/BPI-W2 Debian 10 Buster Lite Demo Image ,This release is for banana pi M4 and W2 board, and it is based on Debian 10 Operation system with kernel 4.9. |
Latest revision as of 22:33, 8 July 2022
Contents
产品介绍
Banana Pi BPI-M4 4核64位开发板,采用RTD1395芯片设计 ,为banana pi 团队最新的Banana Pi BPI-M4具有与Raspberry Pi Model B 一样的尺寸,但搭载更强悍的Realtek RTD1395 SoC,并支援PoE网路线供电与M.2插槽等功能,使用上更具弹性。
Banana Pi BPI-M4搭载Realtek RTD1395 SoC,具有4个64bit的A53处理器核心,以及Mali-470 MP4绘图处理器,在记忆体部分具有1GB或2GB DDR4记忆体版本可供选择,储存装置除了可以选择8GB至64GB eMMC之外,也能透过micro SD插槽扩充256GB以下记忆卡。BPI-M4 I/O接口则有支援1080p输出的HDMI端子、3.5mm音源输出端子、RJ-45有线网路端子(100Mbps)、WiFi 5(IEEE 802.11 b/g/n/ac)、蓝牙4.2、4组USB2.0端子、1组USB2.0 Type-C端子,以及相容于Raspberry Pi 的40 Pin Header,其中28Pin为相容UART、I2C、SPI、PWM的GPIO,其于为+5V、+3.3V、GND电源端子。比较特别的是BPI-M4还有1组M.2 Key E扩充插槽,支援PCIe 2.0与USB 2.0传输规范,能够扩充网路介面卡等设备。
关键特性
- Realtek RTD1395 ARM Cortex-A53 Quad-Core 64 Bit
- Mali 470 MP4 GPU OpenGL ES 1.1/2.0 H.264 H.265,2K4K
- Onboard1 GB DDR4 (option 2 GB)
- 8G eMMC flash (max 64 GB)
- 10/100 Mbit/s Ethernet and RTL8821 module support Wi-Fi 802.11 b/g/n/AC + Bluetooth 4.2
- USB 2.0 TYPE C
- M.2 Key E slot PCIE 2.0 and USB 2.0
- PoE 网络供电功能支持
开发
硬件
硬件接口示意
硬件规格
Banana pi BPI-M4 硬件规格列表 | |||
主控芯片 | Realtek RTD1395 ARM Cortex-A53 Quad-Core 64 Bit | ||
GPU图形 | Mali 470 MP4 GPU OpenGL ES 1.1/2.0 | ||
内存 | 1 GB DDR4 (option 2 GB) | ||
Storage | MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB | ||
网络 | 10/100 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n/AC + Bluetooth 4.2 | ||
Video Output(s) | HDMI port and multi-channel audio output support 1080P H.264 H.265 2K/4K | ||
Audio Output(s) | 3.5mm jack and HDMI | ||
PCIE | M.2 Key E slot PCIE 2.0 and USB 2.0 | ||
USB ports | USB 2.0 PORT (x4), USB 2.0 TYPE C(x1) | ||
GPIO | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM | ||
Switches | Reset, Power and U-boot | ||
LED | Power Status and Activity status | ||
Power Source | 5 volt @2A via Micro USB (TYPE C) or PoE support | ||
Size & Weight | 92x60mm, 48g | ||
OS | Android and Linux |
GPIO 引脚定义
Banana Pi BPI-M4 has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:
40 PIN GPIO of Banana pi BPI-M4 | |||
GPIO Pin Name | Default Function | Function2:GPIO | Function3 |
CON1-P01 | VCC-3V3 | ||
CON1-P02 | DCIN | ||
CON1-P03 | I2C1_SDA | GPIO-17 | |
CON1-P04 | DCIN | ||
CON1-P05 | I2C1_SCL | GPIO-16 | |
CON1-P06 | GND | ||
CON1-P07 | PWM1 | GPIO-21 | |
CON1-P08 | UR1_TX | GPIO-9 | |
CON1-P09 | GND | ||
CON1-P10 | UR1_RX | GPIO-8 | |
CON1-P11 | SDIO-D0 | GPIO-42 | |
CON1-P12 | AIO_BCK | GPIO-3 | |
CON1-P13 | SDIO-D1 | GPIO-43 | |
CON1-P14 | GND | ||
CON1-P15 | SDIO-D2 | GPIO-44 | |
CON1-P16 | UR1_RTS | GPIO-11 | |
CON1-P17 | VCC-3V3 | ||
CON1-P18 | UR1_CTS | GPIO-10 | |
CON1-P19 | GSPI-MOSI | GPIO-31 | |
CON1-P20 | GND | ||
CON1-P21 | GSPI-MISO | GPIO-18 | |
CON1-P22 | GPIO-47 | GPIO-47 | |
CON1-P23 | GSPI-SCK | GPIO-19 | |
CON1-P24 | GSPI-CS | GPIO-20 | |
CON1-P25 | GND | ||
CON1-P26 | PWM2 | GPIO-22 | |
CON1-P27 | SDIO-D3 | GPIO-45 | |
CON1-P28 | PWM3 | GPIO-23 | |
CON1-P29 | SDIO-CLK | GPIO-41 | |
CON1-P30 | GND | ||
CON1-P31 | SDIO-CMD | GPIO-40 | |
CON1-P32 | SPDIF | GPIO-50 | |
CON1-P33 | AIO_CK | GPIO-4 | |
CON1-P34 | GND | ||
CON1-P35 | AIO_LRCK | GPIO-2 | |
CON1-P36 | GPIO-53 | GPIO-53 | |
CON1-P37 | GPIO-34 | GPIO-34 | |
CON1-P38 | AI_SD | GPIO-5 | |
CON1-P39 | GND | ||
CON1-P40 | AO_SD | GPIO-6 |
UART specification:
The header CON2 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.
Uart PIN define of Banana pi BPI-M4 | |||
CON2 Pin Name | Default Function | GPIO | |
CON2-P1 | GND | ||
CON2-P2 | UART0-RX | ||
CON2-P3 | UART0-TX |
- Banana Pi BPI-M4: How to get I2C and SPI running (tutorial):https://forum.banana-pi.org/t/banana-pi-bpi-m4-how-to-get-i2c-and-spi-running-tutorial/12824/6
资源文档
源代码
Android系统
Linux系统
- Supports Banana Pi BPI-M4 (RTD1395) (Kernel 4.9.119)
- Source code on github: https://github.com/BPI-SINOVOIP/BPI-M4-bsp
参考文档
- BPI-M4 硬件原理图:
- google driver:https://drive.google.com/file/d/1A6pj8Y9Ru1_qfMapIdiQnMavEs5xzN5H/view?usp=sharing
- Baidu cloud:https://pan.baidu.com/s/1mnn51dwBV5uxpNheBD4vJA pincode: t6cd
- Banana Pi BPI-M4 CE,FCC,RoHS Certification :http://forum.banana-pi.org/t/banana-pi-bpi-m4-ce-fcc-rohs-certification/9520
- Realtek RTD1395 chip datasheet : https://drive.google.com/file/d/1Jt8qUwEjLinMqURMftC3db0Xg9MIWIhu/view?usp=sharing
- BPI-M4 DXF file download
- google driver: https://drive.google.com/file/d/1xK-DAjdjXiY7BgGcmq7x-aL5g6djznqT/view?usp=sharing
- baidu cloud : 链接: https://pan.baidu.com/s/1bSZFMJ2lD_zuQru6Lf27RQ Pincode: 6pb8
- Banana Pi BPI-M4 Android 8 1 1 demo ,power by raspberry Pi PoE module :https://www.youtube.com/watch?v=aEZ9tSJ-Oao&feature=youtu.be
- Banana Pi BPI-M4 video play h264 4K under Linux with gst-launch-1.0;https://www.youtube.com/watch?v=PwdyGX3tqvo&feature=youtu.be&fbclid=IwAR3AHOgFo4I3bDRl3oLtQXFBj2NUCYBR9GJnEo3tZzpNPKhjE9eKms7JVsQ
- Banana Pi BPI-M4 digital photo download:https://drive.google.com/file/d/1lD9vOhdZMqHFilTPPHY80My0biszvW8r/view?usp=sharing
- BPI-M4 SBC bench test :http://forum.banana-pi.org/t/bpi-m4-sbc-bench-test/9469
- Banana pi BPI-M4: m.2 extension board with nvme ssd : http://forum.banana-pi.org/t/bpi-m4-m-2-extension-board-with-nvme-ssd/11999
- Banana Pi BPI-M4 Review: https://www.magazinmehatronika.com/en/banana-pi-m4-review/
- BPI-M4 USB host dying (uvcvideo and usb rtl8821cu) (solution):https://forum.banana-pi.org/t/bpi-m4-usb-host-dying-uvcvideo-and-usb-rtl8821cu-solution/13210
- Banana Pi BPI-M4: How to get I2C and SPI running (tutorial):https://forum.banana-pi.org/t/banana-pi-bpi-m4-how-to-get-i2c-and-spi-running-tutorial/12824
Image Release
Android
- 2020-5-18 update, Android 8.1 with kernel 4.9.119.
- Note: Starting with this release, BPI-M4 Android8 image is only support 2GB ddr board because 1GB ddr is not stable and smooth for Android8
- 2019-6-25 update ,This release is for BPI-M4 which is based on rtd1395,Image is Android 8.1.0 with kernel 4.9.119.
- For detail steps please see here:http://wiki.banana-pi.org/Getting_Started_with_M4#Install_Android
- Forum pthread:http://forum.banana-pi.org/t/bpi-m4-android-8-1-demo-image-release-2019-06-25/9401
Ubuntu linux
Ubuntu Mate 18.04, Ubuntu Server 16.04, Raspbian Stretch
- 2020-05-18 update, Kernel 4.9.119
- 2019-6-18 update,This release is for banana pi M4 & W2 board, and it is based on Ubuntu Mate 18.04 & Ubuntu Server 16.04 Operation system with kernel 4.9.119.
- BPI-M4/BPI-W2 Ubuntu Mate 18.04
- Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Ubuntu_18.04_Mate
- Google Drive : https://drive.google.com/open?id=1nPI2dy_KCW4h5korQdvj0iymHIDyxIPq
- Baidu Drive : https://pan.baidu.com/s/1tB_QZ6zgmKiYstcZwn51gg (PinCode:edrc)
- MD5 : 7409b48a46e0bbc2d0ae2e70a49bfb36
- BPI-M4/BPI-W2 Ubuntu Server 16.04
- Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Ubuntu_18.04_Mate
- Google Drive : https://drive.google.com/open?id=1G4915FPOU4pDzbI0TCFH8wWXUGmNdlkF
- Baidu Drive : https://pan.baidu.com/s/1lkG6gyzn-KPbvrEhf6Q85w (PinCode:5jbo)
- MD5 : 328706256bec238df50f9bd6ab8dfd1b
- Issue: if HDMI doesn't display, please try "ctrl + alt + F1" to change terminal then "ctrl + alt + F7" change to desktop display.
- Forum pthread:http://forum.banana-pi.org/t/bpi-m4-demo-image-release-ubuntu-mate-18-04-ubuntu-server-16-04-2019-06-18/9362
- BPI-M4/BPI-W2 Ubuntu Mate 18.04
Debian linux
- 2019-08-13 update BPI-M4/BPI-W2 Debian10 Buster Desktop New Demo Image ,This release is for banana pi M4 and W2 board, and it is based on Debian 10 Operation system with kernel 4.9.Debian 10 buster desktop(32bit)
- Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Debian_10_buster
- Google Drive : https://drive.google.com/open?id=1rVrZStsw2PINBhIxCzOLOtYLbtoECmEk
- Baidu Drive : https://pan.baidu.com/s/1WcrBkxm5OyBLedCBwaUz6Q (PinCode:e6m3)
- MD5 : 300b37cdfa092d72dceddd4f33825b40
- Forum Pthread:http://forum.banana-pi.org/t/bpi-m4-bpi-w2-debian10-buster-desktop-new-demo-image-20190813/9712
- FAQ
- Issue: if HDMI doesn’t display, please try “ctrl + alt + F1” to change terminal then “ctrl + alt + F7” change to desktop display.
- SW2: switch to 0,if insert SD, SD start;if doesn’t insert SD,EMMC start.
- 2019-08-06 update,BPI-M4/BPI-W2 Debian 10 Buster Lite Demo Image ,This release is for banana pi M4 and W2 board, and it is based on Debian 10 Operation system with kernel 4.9.
- Debian 10 buster AArch64 (64bit)
- Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Debian_10_buster
- Google Drive : https://drive.google.com/open?id=1QyZX5AGUpEV2OZMXz3qkB8riXROXHdx3
- Baidu Drive : https://pan.baidu.com/s/1CGxGUi8rt06tHwfk134Seg (Pincode:7rcz)
- MD5 : 5a8b1eb36b782fdd742ba746c645593d
- Debian 10 buster AArch64 (64bit)
- Debian 10 buster (32bit)
- Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Debian_10_buster
- Google Drive : https://drive.google.com/open?id=1WJlKTMPAipYnDFqIPl_dmR76oobuO5Wd
- Baidu Drive : https://pan.baidu.com/s/1lTtcMTWqE0jG_1PWGtWSqw (Pincode:gny6)
- MD5 : a59f2e6a298237a08bb523b53372d937
- Debian 10 buster (32bit)
- FAQ
- For more info, please see here:
- BPI-M4: http://wiki.banana-pi.org/Getting_Started_with_M4
- BPI-W2: http://wiki.banana-pi.org/Getting_Started_with_W2
- FAQ
Raspbian Linux
- 2019-6-19 update,This release is for banana pi M4 & W2 board, and it is based on Raspbian 9.8 stretch & AArch64 Linux Mate & AArch Linux Lite Operation system with kernel 4.9.119.
- Fetures Map: http://wiki.banana-pi.org/M4_Image_Map#Raspbian_9.8_stretch
- Google Drive : https://drive.google.com/open?id=15cypBk4NKL0X8uD3Mffc__Sx05j39xCW
- Baidu Drive : https://pan.baidu.com/s/1gwD5ok9XLLQa0InU_-b7EA (PinCode:uuqn)
- MD5 : a397a9c4d078c2841f0c243c573dc9a8
- FAQ
- Issue: if HDMI doesn't display, please try "ctrl + alt + F1" to change terminal then "ctrl + alt + F7" change to desktop display.
- SW2: switch to 0,if insert SD, SD start;if doesn't insert SD,EMMC start.
- Forum pthread:http://forum.banana-pi.org/t/bpi-m4-bpi-w2-demo-image-release-raspbian-9-8-stretch-aarch64-linux-mate-aarch64-linux-lite-2019-06-19/9370
AArch Linux
- .2019-6-19 update,This release is for banana pi M4 & W2 board, and it is based on AArch64 Linux Mate & AArch linux liteOperation system with kernel 4.9.119.
- Fetures Map:
- Google Drive : https://drive.google.com/open?id=1fsk5S4zQfo3tl97Nty_QA1uAEqgB63YK
- Baidu Drive : https://pan.baidu.com/s/1GvGsfs7t018EoRIv-au1GA (PinCode:o496)
- MD5 : d284b2326a36d2d9039fb8d7e20e2600
- AArch64 Linux Lite
- Fetures Map:
- Google Drive : https://drive.google.com/open?id=17V49oBoJZ18MKjSHD_LKjf1Z7qEokYn7
- Baidu Drive : https://pan.baidu.com/s/1WivDWZHu_GnWOxhVOjoqIQ (PinCode:uhcg)
- MD5 : 53bb6f8d00f8708dab96bc865eaddc5e
- FAQ
- Issue: if HDMI doesn't display, please try "ctrl + alt + F1" to change terminal then "ctrl + alt + F7" change to desktop display.
- SW2: switch to 0,if insert SD, SD start;if doesn't insert SD,EMMC start.
- Forum pthread:http://forum.banana-pi.org/t/bpi-m4-bpi-w2-demo-image-release-raspbian-9-8-stretch-aarch64-linux-mate-aarch64-linux-lite-2019-06-19/9370
- FAQ