Difference between revisions of "香蕉派 BPI-R2"
(→BPI-R2 GPIO 定义) |
(→参考文当) |
||
(34 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
=BPI-R2概要= | =BPI-R2概要= | ||
==介绍== | ==介绍== | ||
− | [[File:BPI-R2_3.JPG|thumb| | + | [[File:BPI-R2_3.JPG|thumb|[[香蕉派 BPI-R2]] with MT7623N]] |
+ | [[File:BPI-R64_3.JPG|thumb|[[香蕉派 BPI-R64]] with MT7622]] | ||
+ | [[File:O2A0500.jpg|thumb|[[香蕉派 BPI-W2]] with Realtek RTK1296 chip design]] | ||
+ | [[File:Banana_pi_BPI-R1_1.JPG|thumb|[[香蕉派 BPI-R1]] with allwinner A20 chip design]] | ||
[[File:BPI-R2_case_5.jpg|thumb|[http://wiki.banana-pi.org/Case#BPI-R2_CASE BPI-R2 smart router design]]] | [[File:BPI-R2_case_5.jpg|thumb|[http://wiki.banana-pi.org/Case#BPI-R2_CASE BPI-R2 smart router design]]] | ||
+ | [[File:MTK_MT7615_1.JPG|thumb|[[BPI-MT7615 802.11 ac wifi 4x4 dual-band module]]]] | ||
[[File:BPI-R2_case_1.png|thumb|[http://wiki.banana-pi.org/Case#BPI-R2_CASE BPI-R2 with acrylic case]]] | [[File:BPI-R2_case_1.png|thumb|[http://wiki.banana-pi.org/Case#BPI-R2_CASE BPI-R2 with acrylic case]]] | ||
[[File:R2_for_4G.JPG|thumb|BPI-R2 for BPI 4.0:MT7623N for 4G router [[Successful case]]]] | [[File:R2_for_4G.JPG|thumb|BPI-R2 for BPI 4.0:MT7623N for 4G router [[Successful case]]]] | ||
+ | BPI-R2集成MTK7623N 四核 ARM Cortex-A7 MP 支持主频1.3 ghz,BPI-R2 路由器提供丰富各种外设接口,包括 HDMI TX 高清接口, MIPI DSI 屏接口, PCIe2.0 接口, USB2.0 OTG 端口, USB3.0 端口, SATA 端口,5 千兆网口, 板载802.11a/b/g/n wifi 无线& BT4.1蓝牙 , 并且通过mini PCI-e支持 802.11ac/n WLAN | ||
− | + | BPI-R2 系统支持 Android5.1,并完善支持 OpenWRT,Debian linux,Ubuntu linux, Raspbian 和其他嵌入式操作系统. 尺寸与BPI-R1完全一样大小, 支持 1080P y高清视频输入,40 PIN GPIO 与 Raspberry Pi 3一致. | |
− | [[File: | + | [[File:Banana_Pi_BPI-R2.jpg]] |
==关键特性== | ==关键特性== | ||
Line 30: | Line 35: | ||
==开始使用== | ==开始使用== | ||
− | *使用BPI-R2开发:[[快速上手 R2]] | + | *使用BPI-R2开发:[[快速上手 香蕉派 BPI-R2]] |
*[http://fw-web.de/dokuwiki/doku.php?id=en:bpi-r2: Frank 整理的Wiki文档,很详细的开发手册] | *[http://fw-web.de/dokuwiki/doku.php?id=en:bpi-r2: Frank 整理的Wiki文档,很详细的开发手册] | ||
Line 99: | Line 104: | ||
| OpenWRT, Debian, Ubuntu, Raspbian and others OS | | OpenWRT, Debian, Ubuntu, Raspbian and others OS | ||
|} | |} | ||
+ | |||
+ | ==BPI-MT7615 802.11 ac wifi 4x4 dual-band== | ||
+ | |||
+ | 我们开发了 MT7615 802.11 ac wifi 模组 ,能方便的在 BPI-R2 | ||
+ | |||
+ | MT7615是一个支持1733 Mbps物理量的高度集成的Wi-Fi芯片,它完全符合IEEE 802.11ac和IEEE802.11 a/b/n标准,在高标准下提供丰富的无线连接特性,提供可靠的、经济的吞吐量和扩展的距离。 | ||
+ | |||
+ | [[BPI-MT7615 802.11 ac wifi 4x4 dual-band module]] | ||
== BPI-R2 GPIO 定义== | == BPI-R2 GPIO 定义== | ||
Line 197: | Line 210: | ||
|- | |- | ||
|} | |} | ||
+ | |||
+ | *如何使用 Banana PI BPI-R2's GPIO-s:http://forum.banana-pi.org/t/how-to-use-banana-pi-bpi-r2s-gpio-s/4480 | ||
MIPI DSI \(屏显示接口\) | MIPI DSI \(屏显示接口\) | ||
Line 313: | Line 328: | ||
*OpenWRT LEDE: https://github.com/garywangcn/bpi-r2_lede/tree/bpi-r2-on-lede-v1 | *OpenWRT LEDE: https://github.com/garywangcn/bpi-r2_lede/tree/bpi-r2-on-lede-v1 | ||
*BPI-R2 linux kernel 4.14 : https://github.com/frank-w/BPI-R2-4.14 | *BPI-R2 linux kernel 4.14 : https://github.com/frank-w/BPI-R2-4.14 | ||
+ | *OpenMPTCProuter : https://github.com/Ysurac/openmptcprouter | ||
+ | *BPI-R2 FreeBSD support/ZRouter.org support :https://gist.github.com/rayddteam/3461964e69f1fcc727b1b68ec9d6d0c8 | ||
+ | *Banana Pi BPI-R2 19.07.7 OpenWRT Router source code on github: https://github.com/BPI-SINOVOIP/BPI-R2-OPENWRT-19.07.7.git | ||
==参考文当== | ==参考文当== | ||
Line 319: | Line 337: | ||
* DXF 结构文件 [https://drive.google.com/file/d/0B4PAo2nW2KfnenRRNGhmc29IZ2c/view?usp=sharing BPI-R2 DXF design file] | * DXF 结构文件 [https://drive.google.com/file/d/0B4PAo2nW2KfnenRRNGhmc29IZ2c/view?usp=sharing BPI-R2 DXF design file] | ||
* MTK MT7623N 芯片规格书 | * MTK MT7623N 芯片规格书 | ||
− | ::[https:// | + | ::[链接: https://pan.baidu.com/s/1BCzYjVKeJz23ha2xwP-Stg 提取码: kwzt MTK 7623N datasheet for development board programming guide V1.1] |
*FW-Web Wiki : http://fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:start | *FW-Web Wiki : http://fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:start | ||
+ | *如何使用 Banana PI BPI-R2's GPIO-s:http://forum.banana-pi.org/t/how-to-use-banana-pi-bpi-r2s-gpio-s/4480 | ||
* Banana pi BPI-R2 CE,FCC,RoHS: | * Banana pi BPI-R2 CE,FCC,RoHS: | ||
::[http://forum.banana-pi.org/t/bpi-r2-smart-router-board-ce-fcc-rohs-certification/4852 CE,FCC,RoHS] | ::[http://forum.banana-pi.org/t/bpi-r2-smart-router-board-ce-fcc-rohs-certification/4852 CE,FCC,RoHS] | ||
Line 328: | Line 347: | ||
*The best news is that the final patchset version for HNAT framework was accepted ( kernel 4.16) and it's based on nftables.:https://www.spinics.net/lists/netfilter-devel/msg50973.html | *The best news is that the final patchset version for HNAT framework was accepted ( kernel 4.16) and it's based on nftables.:https://www.spinics.net/lists/netfilter-devel/msg50973.html | ||
*How to build an Ubuntu/Debian SD image from scratch : http://forum.banana-pi.org/t/how-to-build-an-ubuntu-debian-sd-image-from-scratch/6805 | *How to build an Ubuntu/Debian SD image from scratch : http://forum.banana-pi.org/t/how-to-build-an-ubuntu-debian-sd-image-from-scratch/6805 | ||
+ | *Best Banana Pi R2 Operating System Options: https://www.electromaker.io/blog/article/best-banana-pi-r2-operating-system-options | ||
+ | *Make a Banana Pi R2 Router: Banana Pi R2 OpenWRT Installation and Review:https://www.electromaker.io/tutorial/blog/make-a-banana-pi-r2-router-banana-pi-r2-openwrt-installation-and-review | ||
+ | *MTK chip mailline Linux effort :https://mtk.bcnfs.org/doku.php?id=linux_mainline_effort | ||
+ | *BPI-R2 and SSD1306 oled screen : http://forum.banana-pi.org/t/bpi-r2-and-ssd1306-oled-screen/11917 | ||
+ | *How to configure BPi-R2 as one-armed “router on a stick”:http://forum.banana-pi.org/t/how-to-configure-bpi-r2-as-one-armed-router-on-a-stick/12022/6 | ||
+ | *New netfilter flow table based HNAT:http://forum.banana-pi.org/t/new-netfilter-flow-table-based-hnat/12049 | ||
+ | *OpenWRT official wiki for BPI-R2 : https://openwrt.org/toh/sinovoip/sinovoip_banana_pi_r2 | ||
+ | *802.11ax 4x4 (mt7915) with BPI-R2 :http://forum.banana-pi.org/t/802-11ax-4x4-mt7915-with-r2/12082 | ||
+ | *[Tutorial] Build, customize and use MediaTek open-source U-Boot and ATF : https://forum.banana-pi.org/t/tutorial-build-customize-and-use-mediatek-open-source-u-boot-and-atf/13785 | ||
+ | *[BPI-R2/R64/R3] OpenWrt built on devices : https://openwrt.org/docs/guide-developer/toolchain/building_openwrt_on_openwrt | ||
=软件镜像= | =软件镜像= | ||
Line 341: | Line 370: | ||
==OpenWrt(LEDE)== | ==OpenWrt(LEDE)== | ||
+ | |||
+ | *Banana Pi BPI-R2 19.07.7 OpenWRT Router image Kernel 4.14.112 2021-04-15 | ||
+ | ::Wan IP : DHCP | ||
+ | ::Lan IP :192.168.1.1 | ||
+ | ::google image download link:https://drive.google.com/file/d/1OFSq6-23CT31Nt5Nohq2E9Nh6RmsCGXC/view?usp=sharing | ||
+ | ::baidu link : https://pan.baidu.com/s/1_0dWUsLXc4HUurAdleOf_w pincode: 7262 | ||
+ | ::Discuss on forum: http://forum.banana-pi.org/t/banana-pi-bpi-r2-19-07-7-openwrt-router-image-2021-04-15/12161 | ||
+ | ::Source code https://github.com/BPI-SINOVOIP/BPI-R2-OPENWRT-19.07.7.git | ||
+ | |||
+ | |||
+ | *Official OpenWR 18.06.4 for Banana Pi BPI-R2 image released 2019-7-04 | ||
+ | ::image download:https://downloads.openwrt.org/releases/18.06.4/targets/mediatek/mt7623/ | ||
+ | ::https://openwrt.org/toh/sinovoip/sinovoip_banana_pi_r2 | ||
+ | ::Forum pthread:http://forum.banana-pi.org/t/official-openwr-18-06-4-for-banana-pi-bpi-r2-image-released-2019-7-04/9459 | ||
+ | |||
+ | |||
+ | *BananaPI BPI-R2 Openwrt18.06 Image Release and source code 2019-03-06 | ||
+ | ::source code on Github: https://github.com/BPI-SINOVOIP/BPI-R2-OPENWRT-18.06 | ||
+ | ::image download: https://dev.banana-pi.org.cn/Image/BPI-R2/Openwrt/1806/ | ||
+ | ::MD5SUM | ||
+ | ::::mtk-bpi-r2-EMMC.img : 5d1537c45679de352dd25d8dda46b9ad | ||
+ | ::::mtk-bpi-r2-SD.img :71fce303abdceed4f1c3548d5a3fc207 | ||
+ | ::forum Pthread: http://forum.banana-pi.org/t/bananapi-bpi-r2-openwrt18-06-demo-image-release-2019-03-06/8562 | ||
+ | |||
*Official OpenWRT 18.06.0 image : | *Official OpenWRT 18.06.0 image : | ||
::https://downloads.openwrt.org/releases/18.06.0/targets/mediatek/mt7623/ | ::https://downloads.openwrt.org/releases/18.06.0/targets/mediatek/mt7623/ | ||
Line 349: | Line 402: | ||
::BPI-R2 OpenWrt(LEDE) 20180411: http://forum.banana-pi.org/t/topic/5395 | ::BPI-R2 OpenWrt(LEDE) 20180411: http://forum.banana-pi.org/t/topic/5395 | ||
::BPI-R2 OpenWrt(LEDE) 20170908: http://forum.banana-pi.org/t/topic/3797 | ::BPI-R2 OpenWrt(LEDE) 20170908: http://forum.banana-pi.org/t/topic/3797 | ||
+ | |||
+ | ==OpenMPTCProuter== | ||
+ | *2018-10-12 update, OpenMPTCProuter use MultiPath TCP (MPTCP) to aggregate multiple Internet connections and OpenWrt. and have official support BPI-R2. | ||
+ | ::image download:https://www.openmptcprouter.com/download | ||
+ | ::source code on github:https://github.com/Ysurac/openmptcprouter | ||
+ | ::forum pthread: http://forum.banana-pi.org/t/banana-pi-bpi-r2-new-image-openmptcprouter-official-support/7229 | ||
+ | |||
+ | ==Armbian== | ||
+ | |||
+ | *Armbian preview image for Bananapi R2 / K4.19.y | ||
+ | ::https://www.armbian.com/bananapi-r2/ | ||
==Centos 7== | ==Centos 7== | ||
Line 356: | Line 420: | ||
==Debian== | ==Debian== | ||
+ | *2019-8-12 update.[BPI-R2] debian 10 buster image with Kernel 4.19.62, shared by frank-w | ||
+ | ::Kernel: 4.19.62,uboot 2019-07 with erase-env + sata-support,new preloader (2019-07-22),configured to ip 192.168.0.11 on lan0,openssh-server running with root-login (should be disabled afterwards),username/password: root/bananapi | ||
+ | ::google drive:https://drive.google.com/open?id=1oP7jy1KrrIOifvImo2nQ59wx3_9hHkgk | ||
+ | ::how to : https://www.fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:storage#short_install-guide | ||
+ | ::forum discuss:http://forum.banana-pi.org/t/bpi-r2-debian-buster-image-with-kernel-4-19-62/9601 | ||
+ | |||
*Image Release | *Image Release | ||
::image download : https://drive.google.com/drive/folders/1oP7jy1KrrIOifvImo2nQ59wx3_9hHkgk | ::image download : https://drive.google.com/drive/folders/1oP7jy1KrrIOifvImo2nQ59wx3_9hHkgk | ||
Line 379: | Line 449: | ||
::Forum pthread : http://forum.banana-pi.org/t/banana-pi-bpi-r2-new-image-gpu-decode-test-yocto-with-kernel-4-4-just-for-test/6508 | ::Forum pthread : http://forum.banana-pi.org/t/banana-pi-bpi-r2-new-image-gpu-decode-test-yocto-with-kernel-4-4-just-for-test/6508 | ||
− | = | + | ==MQLinux 19.02 beta== |
+ | *update 2019-03-12, | ||
+ | ::Main features: | ||
+ | ::::Highly streamlined embedded design system, running in memory | ||
+ | ::::Mutilple Language (en/zh_CN currently) | ||
+ | ::::DNS Proxy/Cache | ||
+ | ::::DDNS | ||
+ | ::::VLAN Extension for WAN | ||
+ | ::::Multiple WAN (each ethernet port can be defined) | ||
+ | ::::DHCP Server | ||
+ | ::::FTP Server | ||
+ | ::::PPPoE Server | ||
+ | ::::Samber Server | ||
+ | ::::VPN client/Server (PPTP VPN, IPsecVPN, OpenVPN) | ||
+ | ::::Cloud Login | ||
+ | ::::Firewall | ||
+ | ::::IP-MAC Locking | ||
+ | ::::Port Mapping/DMZ/UPnP | ||
+ | ::::Diagnose Tools … | ||
+ | ::image dwonload: https://drive.google.com/file/d/1Ws2IUiCGSKKQ2dCM5XJBV-pog-hk17PM/view?usp=sharing | ||
+ | ::::MD5: 09b58f050166ed5d09803e1de56d7890 | ||
+ | ::Forum pthread: http://forum.banana-pi.org/t/banana-pi-bpi-r2-new-image-mqlinux-19-02-beta/8832 | ||
+ | |||
+ | =BPI-R2 相关项目= | ||
*BPI-R2 based DIY NAS/Router : https://bburky.com/NAS/ | *BPI-R2 based DIY NAS/Router : https://bburky.com/NAS/ | ||
::Forum pthread:http://forum.banana-pi.org/t/bpi-r2-based-diy-nas-router/6787 | ::Forum pthread:http://forum.banana-pi.org/t/bpi-r2-based-diy-nas-router/6787 | ||
+ | |||
=FAQ= | =FAQ= |
Latest revision as of 22:38, 19 April 2023
Contents
BPI-R2概要
介绍
BPI-R2集成MTK7623N 四核 ARM Cortex-A7 MP 支持主频1.3 ghz,BPI-R2 路由器提供丰富各种外设接口,包括 HDMI TX 高清接口, MIPI DSI 屏接口, PCIe2.0 接口, USB2.0 OTG 端口, USB3.0 端口, SATA 端口,5 千兆网口, 板载802.11a/b/g/n wifi 无线& BT4.1蓝牙 , 并且通过mini PCI-e支持 802.11ac/n WLAN
BPI-R2 系统支持 Android5.1,并完善支持 OpenWRT,Debian linux,Ubuntu linux, Raspbian 和其他嵌入式操作系统. 尺寸与BPI-R1完全一样大小, 支持 1080P y高清视频输入,40 PIN GPIO 与 Raspberry Pi 3一致.
关键特性
- MediaTek MT7623N, Quad-core ARM Cortex-A7
- Mali 450 MP4 GPU
- 2G DDR3 SDRAM
- Mini PCIE interface.
- support 2 SATA interface
- MicroSD slot supports up to 256GB expansion
- 8G eMMC flash (option 16/32/64G)
- MIPI display interface support
- 5 port 10/100/1000 Mb Ethernet port
- (2) USB 3.0 and (1) USB 2.0 otg port
- 1080P high-definition video playback
- HDMI port and multi-channel audio output
- WIFI&Bluetooth 4.1 with 802.11B/G/N onboard
开始使用
- 使用BPI-R2开发:快速上手 香蕉派 BPI-R2
- Frank 整理的Wiki文档,很详细的开发手册
硬件
硬件接口示意
硬件规格
Banana Pi BPI-R2 硬件规格 | |
---|---|
CPU | MediaTek MT7623N, Quad-core ARM Cortex-A7 |
GPU | Mali 450 MP4 GPU |
Memory | 2G DDR3 SDRAM |
Storage | Onboard 8GB eMMC Flash, Micro SD-Card slot, Two SATA 2.0 Port |
Network | 5 x 10/100/1000 Mbit/s Ethernet (MT7530) |
WIFI&BT | Wi-Fi 802.11 b/g/n 2.4G/5G + Bluetooth BT4.1(MT6625L) |
Display(s) | HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200; MIPI Display Serial Interface (DSI) interface(4 data lanes) |
Video decoder(s) | Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc. H.264 high-profile 1080p@60fps, HEVC/H.265 1080P@60fps |
Audio Output(s) | HDMI & I2S |
USB port | USB 3.0 PORT (x2), USB OTG (x1) |
mini PCIE | 1 mini pcie interface & 1 pcie pin define interface |
Remote | IR Receiver (x1) |
GPIO | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM |
Switches | Reset button, Power button, U-boot button |
LED | Power Status and 8P8C |
Power Source | 5 volt @2A via DC Power and/or Micro USB (OTG) |
Size & Weight | 148 mm × 100.5mm 100g |
OS | OpenWRT, Debian, Ubuntu, Raspbian and others OS |
BPI-MT7615 802.11 ac wifi 4x4 dual-band
我们开发了 MT7615 802.11 ac wifi 模组 ,能方便的在 BPI-R2
MT7615是一个支持1733 Mbps物理量的高度集成的Wi-Fi芯片,它完全符合IEEE 802.11ac和IEEE802.11 a/b/n标准,在高标准下提供丰富的无线连接特性,提供可靠的、经济的吞吐量和扩展的距离。
BPI-MT7615 802.11 ac wifi 4x4 dual-band module
BPI-R2 GPIO 定义
同香蕉派其他板一样,Banana Pi BPI-R2 也有40-pin GPIO 接口:
Banana Pi BPI-R2 的40 PIN GPIO 定义与树莓派 3 一亲,下面是 Banana Pi GPIO定义:
Banana pi BPI-R2 40 PIN GPIO 定义:
Banana pi BPI-R2 40 PIN GPIO 定义 | |||
GPIO Pin Name | Default Function | ||
CON1-P01 | VCC-3V3 | ||
CON1-P02 | VCC-5V | ||
CON1-P03 | I2C\_SDA0 | GPIO75 | |
CON1-P04 | VCC-5V | ||
CON1-P05 | I2C\_SCL0 | GPIO76 | |
CON1-P06 | GND | ||
CON1-P07 | PWM-003 | GPIO206 | |
CON1-P08 | UTXD1 | GPIO80 | |
CON1-P09 | GND | ||
CON1-P10 | URXD0 | GPIO81 | |
CON1-P11 | URXD1 | GPIO80 | |
CON1-P12 | I2S0\_BCK | GPIO74 | |
CON1-P13 | UTXD0 | GPIO79 | |
CON1-P14 | GND | ||
CON1-P15 | PWM-002 | GPIO205 | |
CON1-P16 | URTS1 | GPIO25 | |
CON1-P17 | VCC-3V3 | ||
CON1-P18 | UCTS1 | GPIO24 | |
CON1-P19 | SPI0\_MO | GPIO56 | |
CON1-P20 | GND | ||
CON1-P21 | SPI0\_MI | GPIO55 | |
CON1-P22 | PCM\_CLK | GPIO18 | |
CON1-P23 | SPI0\_CK | GPIO54 | |
CON1-P24 | SPI0\_CSN | GPIO53 | |
CON1-P25 | GND | ||
CON1-P26 | PCM\_RX | GPIO20 | |
CON1-P27 | I2C\_SDA1 | GPIO57 | |
CON1-P28 | I2C\_SCL1 | GPIO58 | |
CON1-P29 | PCM\_RST | GPIO22 | |
CON1-P30 | GND | ||
CON1-P31 | SPDIF\_OUT | GPIO200 | |
CON1-P32 | PCM\_TX | GPIO21 | |
CON1-P33 | I2S0\_MCLK | GPIO126 | |
CON1-P34 | GND | ||
CON1-P35 | I2S0\_LRCK | GPIO73 | |
CON1-P36 | PCM\_SYNC | GPIO19 | |
CON1-P37 | SPDIF\_IN1 | GPIO202 | |
CON1-P38 | I2S0\_DATA\_IN | GPIO72 | |
CON1-P39 | GND | ||
CON1-P40 | I2S0\_DATA\_OUT | GPI049 |
- 如何使用 Banana PI BPI-R2's GPIO-s:http://forum.banana-pi.org/t/how-to-use-banana-pi-bpi-r2s-gpio-s/4480
MIPI DSI \(屏显示接口\)
Thedisplay Connector is a 40-pin FPC connector which can connect external LCD panel \(MIPI DSI\) and touch screen \(I2C\) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as“DSI”.
MIPI DSI of Banana pi BPI-R2 | |||
DSI Pin Name | Default Function | Function2:GPIO | |
CN6-P01 | VCC-3V3 | ||
CN6-P02 | VCC-5V | ||
CN6-P03 | VCC-3V3 | ||
CN6-P04 | VCC-5V | ||
CN6-P05 | GND | ||
CN6-P06 | VCC-5V | ||
CN6-P07 | GND | ||
CN6-P08 | VCC-5V | ||
CN6-P09 | NC | ||
CN6-P10 | GND | ||
CN6-P11 | NC | ||
CN6-P12 | DSI-D0N | ||
CN6-P13 | NC | ||
CN6-P14 | DSI-D0P | ||
CN6-P15 | DSI\_TE | GPIO84 | |
CN6-P16 | GND | ||
CN6-P17 | I2C\_SDA2 | GPIO77 | |
CN6-P18 | DSI-D1N | ||
CN6-P19 | I2C\_SCL2 | GPIO78 | |
CN6-P20 | DSI-D1P | ||
CN6-P21 | CTP-INT | GPIO23 | |
CN6-P22 | GND | ||
CN6-P23 | CTP-RST | GPIO236 | |
CN6-P24 | DSI-CKN | ||
CN6-P25 | GND | ||
CN6-P26 | DSI-CKP | ||
CN6-P27 | GPIO28 | ||
CN6-P28 | GND | ||
CN6-P29 | GPIO83 | ||
CN6-P30 | DSI-D2N | ||
CN6-P31 | GPIO204 | ||
CN6-P32 | DSI-D2P | ||
CN6-P33 | GND | ||
CN6-P34 | GND | ||
CN6-P35 | LCM\_BLPWM | GPIO203 | |
CN6-P36 | DSI-D3N | ||
CN6-P37 | GND | ||
CN6-P38 | DSI-D3P | ||
CN6-P39 | NC | ||
CN6-P40 | GND |
UART 串口定义:
Theheader CON4 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.
Debug Uart of Banana pi BPI-R2 | |||
CON2 Pin Name | Default Function | GPIO | |
CON2 P03 | UTXD2 | ||
CON2P02 | URXD2 | ||
CON2P01 | GND |
资源
软件源代码
- BPI-R2 github BSP : https://github.com/BPI-SINOVOIP/BPI-R2-bsp
- OpenWRT LEDE: https://github.com/garywangcn/bpi-r2_lede/tree/bpi-r2-on-lede-v1
- BPI-R2 linux kernel 4.14 : https://github.com/frank-w/BPI-R2-4.14
- OpenMPTCProuter : https://github.com/Ysurac/openmptcprouter
- BPI-R2 FreeBSD support/ZRouter.org support :https://gist.github.com/rayddteam/3461964e69f1fcc727b1b68ec9d6d0c8
- Banana Pi BPI-R2 19.07.7 OpenWRT Router source code on github: https://github.com/BPI-SINOVOIP/BPI-R2-OPENWRT-19.07.7.git
参考文当
- BPI-R2 原理图V1.2:BPI-R2 V1.2 hardware schematic diagram
- BPI-R2 原理图V1.1 :BPI-R2 V1.1 hardware schematic diagram
- DXF 结构文件 BPI-R2 DXF design file
- MTK MT7623N 芯片规格书
- [链接: https://pan.baidu.com/s/1BCzYjVKeJz23ha2xwP-Stg 提取码: kwzt MTK 7623N datasheet for development board programming guide V1.1]
- FW-Web Wiki : http://fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:start
- 如何使用 Banana PI BPI-R2's GPIO-s:http://forum.banana-pi.org/t/how-to-use-banana-pi-bpi-r2s-gpio-s/4480
- Banana pi BPI-R2 CE,FCC,RoHS:
- Banana Pi BPI-R2 Razberry board OpenHab2
- gitbook online documents: https://bananapi.gitbooks.io/banana-pi-bpi-r2-open-source-smart-router/content/
- The best news is that the final patchset version for HNAT framework was accepted ( kernel 4.16) and it's based on nftables.:https://www.spinics.net/lists/netfilter-devel/msg50973.html
- How to build an Ubuntu/Debian SD image from scratch : http://forum.banana-pi.org/t/how-to-build-an-ubuntu-debian-sd-image-from-scratch/6805
- Best Banana Pi R2 Operating System Options: https://www.electromaker.io/blog/article/best-banana-pi-r2-operating-system-options
- Make a Banana Pi R2 Router: Banana Pi R2 OpenWRT Installation and Review:https://www.electromaker.io/tutorial/blog/make-a-banana-pi-r2-router-banana-pi-r2-openwrt-installation-and-review
- MTK chip mailline Linux effort :https://mtk.bcnfs.org/doku.php?id=linux_mainline_effort
- BPI-R2 and SSD1306 oled screen : http://forum.banana-pi.org/t/bpi-r2-and-ssd1306-oled-screen/11917
- How to configure BPi-R2 as one-armed “router on a stick”:http://forum.banana-pi.org/t/how-to-configure-bpi-r2-as-one-armed-router-on-a-stick/12022/6
- New netfilter flow table based HNAT:http://forum.banana-pi.org/t/new-netfilter-flow-table-based-hnat/12049
- OpenWRT official wiki for BPI-R2 : https://openwrt.org/toh/sinovoip/sinovoip_banana_pi_r2
- 802.11ax 4x4 (mt7915) with BPI-R2 :http://forum.banana-pi.org/t/802-11ax-4x4-mt7915-with-r2/12082
- [Tutorial] Build, customize and use MediaTek open-source U-Boot and ATF : https://forum.banana-pi.org/t/tutorial-build-customize-and-use-mediatek-open-source-u-boot-and-atf/13785
- [BPI-R2/R64/R3] OpenWrt built on devices : https://openwrt.org/docs/guide-developer/toolchain/building_openwrt_on_openwrt
软件镜像
Ubuntu with kernel 4.4
- Source code(BSP): https://github.com/BPI-SINOVOIP/BPI-R2-bsp
- BPI-R2 Ubuntu 16.04 Kernel4.4 V1.3
- Image Release : http://forum.banana-pi.org/t/topic/5293
Ubuntu with kernel 4.14
- Source code(BSP): https://github.com/BPI-SINOVOIP/BPI-R2-bsp-4.14
- Image Release
- BPI-R2 Ubuntu 16.04 Kernel4.14 V1.0: http://forum.banana-pi.org/t/topic/5548
OpenWrt(LEDE)
- Banana Pi BPI-R2 19.07.7 OpenWRT Router image Kernel 4.14.112 2021-04-15
- Wan IP : DHCP
- Lan IP :192.168.1.1
- google image download link:https://drive.google.com/file/d/1OFSq6-23CT31Nt5Nohq2E9Nh6RmsCGXC/view?usp=sharing
- baidu link : https://pan.baidu.com/s/1_0dWUsLXc4HUurAdleOf_w pincode: 7262
- Discuss on forum: http://forum.banana-pi.org/t/banana-pi-bpi-r2-19-07-7-openwrt-router-image-2021-04-15/12161
- Source code https://github.com/BPI-SINOVOIP/BPI-R2-OPENWRT-19.07.7.git
- Official OpenWR 18.06.4 for Banana Pi BPI-R2 image released 2019-7-04
- BananaPI BPI-R2 Openwrt18.06 Image Release and source code 2019-03-06
- source code on Github: https://github.com/BPI-SINOVOIP/BPI-R2-OPENWRT-18.06
- image download: https://dev.banana-pi.org.cn/Image/BPI-R2/Openwrt/1806/
- MD5SUM
- mtk-bpi-r2-EMMC.img : 5d1537c45679de352dd25d8dda46b9ad
- mtk-bpi-r2-SD.img :71fce303abdceed4f1c3548d5a3fc207
- forum Pthread: http://forum.banana-pi.org/t/bananapi-bpi-r2-openwrt18-06-demo-image-release-2019-03-06/8562
- Official OpenWRT 18.06.0 image :
- Source code: https://github.com/garywangcn/bpi-r2_lede/tree/bpi-r2-on-lede-v1
- Image Release
- BPI-R2 OpenWrt(LEDE) 20180509: http://forum.banana-pi.org/t/topic/5646
- BPI-R2 OpenWrt(LEDE) 20180411: http://forum.banana-pi.org/t/topic/5395
- BPI-R2 OpenWrt(LEDE) 20170908: http://forum.banana-pi.org/t/topic/3797
OpenMPTCProuter
- 2018-10-12 update, OpenMPTCProuter use MultiPath TCP (MPTCP) to aggregate multiple Internet connections and OpenWrt. and have official support BPI-R2.
- image download:https://www.openmptcprouter.com/download
- source code on github:https://github.com/Ysurac/openmptcprouter
- forum pthread: http://forum.banana-pi.org/t/banana-pi-bpi-r2-new-image-openmptcprouter-official-support/7229
Armbian
- Armbian preview image for Bananapi R2 / K4.19.y
Centos 7
- Source code(BSP): https://github.com/BPI-SINOVOIP/BPI-R2-bsp
- Image Release
- BPI-R2 Centos 7 Kernel4.4 20180112: http://forum.banana-pi.org/t/topic/5124
Debian
- 2019-8-12 update.[BPI-R2] debian 10 buster image with Kernel 4.19.62, shared by frank-w
- Kernel: 4.19.62,uboot 2019-07 with erase-env + sata-support,new preloader (2019-07-22),configured to ip 192.168.0.11 on lan0,openssh-server running with root-login (should be disabled afterwards),username/password: root/bananapi
- google drive:https://drive.google.com/open?id=1oP7jy1KrrIOifvImo2nQ59wx3_9hHkgk
- how to : https://www.fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:storage#short_install-guide
- forum discuss:http://forum.banana-pi.org/t/bpi-r2-debian-buster-image-with-kernel-4-19-62/9601
- Image Release
Basic Alpine Router Platform with WIFI AccessPoint on Pantavisor 005
- Image Release
- release date :2018-06-17
- SD-Card images:
- PVR Command Line Tool (download to PATH directory and make executable):
- Discuss on forum :
yocto Linux
- this image just for test. yocto with kernel 4 4,and GPU working fine.this GPU binary is from yocto SDK with kernel 3.18 , we test it with github kernel 4.4 , just change rootfs. if working fine .so , maybe can use on kernel 4.14. just need to test . and have weston commond to test more.
MQLinux 19.02 beta
- update 2019-03-12,
- Main features:
- Highly streamlined embedded design system, running in memory
- Mutilple Language (en/zh_CN currently)
- DNS Proxy/Cache
- DDNS
- VLAN Extension for WAN
- Multiple WAN (each ethernet port can be defined)
- DHCP Server
- FTP Server
- PPPoE Server
- Samber Server
- VPN client/Server (PPTP VPN, IPsecVPN, OpenVPN)
- Cloud Login
- Firewall
- IP-MAC Locking
- Port Mapping/DMZ/UPnP
- Diagnose Tools …
- image dwonload: https://drive.google.com/file/d/1Ws2IUiCGSKKQ2dCM5XJBV-pog-hk17PM/view?usp=sharing
- MD5: 09b58f050166ed5d09803e1de56d7890
- Forum pthread: http://forum.banana-pi.org/t/banana-pi-bpi-r2-new-image-mqlinux-19-02-beta/8832
- Main features:
BPI-R2 相关项目
- BPI-R2 based DIY NAS/Router : https://bburky.com/NAS/