Difference between revisions of "Banana Pi BPI-F2"
(→Hardware spec) |
(→Hardware spec) |
||
| Line 48: | Line 48: | ||
| Audio input || N/A | | Audio input || N/A | ||
|- | |- | ||
| − | | USB || 2 * USB 2.0 | + | | USB || 2 * USB 2.0 1* USB Otg |
|- | |- | ||
| Buttons || Power & Reset | | Buttons || Power & Reset | ||
Revision as of 23:18, 23 July 2018
Contents
Introduction
Key Features
Getting Start
Hardware
Hardware interfact
Hardware spec
| HardWare Specification of Banana pi BPI-F2 | |||
| Soc | with freescale IMX6 | ||
| CPU | |||
| GPU | |||
| SDRAM | 2G DDR3 | ||
| PCIE | 1 mini PCIE interface | ||
| SATA | support 1*SATA interface | ||
| GPIO | 40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
| On board Network | 10/100/1000M | ||
| Wifi Module | N/A | ||
| Bluetooth | N/A | ||
| On board Storage | MicroSD \(TF\) card,8G eMMC onboard (option 8-64G) | ||
| Display | HDMI out, LVDS out | ||
| Video | HDMI out, LVDS out | ||
| Audio outputs | 1 * 3.5 headset jack | ||
| Camera | 1 * DVP camera interface and 1* MIP camera interface | ||
| Audio input | N/A | ||
| USB | 2 * USB 2.0 1* USB Otg | ||
| Buttons | Power & Reset | ||
| Leds | 3* RGB leds | ||
| IR | N/A | ||
| DC Power | 12V/2A with DC port | ||
| battery | No 3.7V lithium battery power support | ||
| Sizes | |||
| Weight | 80g | ||
