Latest revision as of 00:12, 20 March 2024

Introduction

Banana Pi BPI-M1 with Allwinner A20 chip

Banana Pi BPI-M1+ with Allwinner A20 chip

Banana Pi BPI-M4 Berry H618 design

Banana Pi BPI-M2 ZERO with Allwinner H3 chip

Banana Pi BPI-P2 Zero with Allwinner H3 chip

Banana Pi BPI-M2+ with Allwinner H3 chip

Banana Pi BPI-M2M with Allwinner R16 chip design

Banana Pi BPI-M2 Berry with Allwinner A40i

Banana Pi BPI-M2U with Allwinner A40i

Banana Pi BPI-M64 with Allwinner A64 chip design

Banana Pi BPI-M3 with Allwinner A83T chip design

BPI-M1 3D

BPI-M1 with plastic case

BPI-M1/M1+ for BPI 4.0 Successful case : smart home gateway

BPI-M1/M1+ for BPI 4.0 Successful case :3G Information security terminal

BPI-M1/M1+ for BPI 4.0 Successful case :4G Industrial safety tablets

The Banana Pi BPI-M1 is a business card-sized and low-power single-board computer featuring a high performance AllWinner A20 dual-core SoC at 1 GHz, 1 GB of DDR3 SDRAM, Gigabit Ethernet, SATA, USB, and HDMI connections. It can run a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian.

It is the first open source hardware launched by the banana pie team, and also a classic product with the largest cumulative sales of banana pie.There are still a lot of business clients that apply to various projects.A20 chip

Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding.

Key Features

Allwinner A20 Dual-core 1.0GHz CPU
Mali-400 MP2 with Open GL ES 2.0/1.1.
1 GB DDR3 memory.
1x SATA interface.
1x Gigabit LAN
1x USB otg and 2x USB 2.0
1X MIC
AV vide out
HDMI out
IR
CSI camera interface
DSI display interface
26 PIN gpio

Getting Start

Hardware

Hardware interface

Hardware spec

Banana Pi BPI-M1
CPU	A20 ARM Cortex -A7 Dual-Core
GPU	ARM Mali 400 MP2; Complies with OpenGL ES 2.0/1.1
Memory	1GB DDR3
Network	10/100/1000 Ethernet 8P8C (1000BASE-T)
Video Input	A CSI input connector allows for the connection of a designed camera module
Video Outputs	HDMI, CVBS, LVDS/RGB
Audio Outputs	3.5mm jack and HDMI
Power Source	5 volts DC via Micro USB or GPIO
USB 2.0 ports	2 (direct from Allwinner A20 chip)
GPIO	GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PWM, +3.3V, +5V, GND
LED	Power Key & 8P8C
Storage	SATA 2.0,

GPIO PIN define

Banana Pi BPI-M1 has a 26-pin GPIO header . Following is the Banana Pi GPIO Pinout:

Note: 5V1,5V2 only support output,not support input

CSI Camera Connector specification:

CSI Camera Connector The CSI Camera Connector is a 40-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin definitions of the CSI interface are shown as below. This is marked on the Banana Pi board as “CON1″.

40 PIN GPIO of Banana pi BPI-M1
CSI GPIO Pin	Pin Name	GPIO
CON1 P01	LINEINL
CON1 P02	LINEINR
CON1 P03	VCC-CSI
CON1 P04	ADC\_X1
CON1 P05	GND
CON1 P06	ADC\_X2
CON1 P07	FMINL
CON1 P08	ADC\_Y1
CON1 P09	FMINR
CON1 P10	ADC\_Y2
CON1 P11	GND
CON1 P12	CSI-FLASH	PH17
CON1 P13	LRADC0
CON1 P14	TWI1-SDA	PB19
CON1 P15	LRADC1
CON1 P16	TWI1-SCK	PB18
CON1 P17	CSI-D0	PE4
CON1 P18	CSI0-STBY-EN	PH19
CON1 P19	CSI0-D1	PE5
CON1 P20	CSI-PCLK	PE0
CON1 P21	CSI-D2	PE6
CON1 P22	CSI0-PWR-EN	PH16
CON1 P23	CSI-D3	PE7
CON1 P24	CSI0-MCLK	PE1
CON1 P25	CSI-D4	PE8
CON1 P26	CSI0-RESET\#	PH14
CON1 P27	CSI-D5	PE9
CON1 P28	CSI-VSYNC	PE3
CON1 P29	CSI-D6	PE10
CON1 P30	CSI-HSYNC	PE2
CON1 P31	CSI-D7	PE11
CON1 P32	CSI1-STBY-EN	PH18
CON1 P33	RESET\#
CON1 P34	CSI1-RESET\#	PH13
CON1 P35	CSI-IO0	PH11
CON1 P36	HPR
CON1 P37	HPL
CON1 P38	IPSOUT
CON1 P39	GND
CON1 P40	IPSOUT

LVDS \(LCD display interface\)

The LVDS Connector is a 40-pin FPC connector which can connect external LCD panel \(LVDS\) and touch screen \(I2C\) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as “CON2″.

LVDS GPIO of Banana pi BPI-M1
LVDS Pin	Pin Name	Multiplex Function Select	GPIO
		Multi 1	Multi 2
CON2 P01	IPSOUT\(5V output\)
CON2 P02	TWI3-SDA		PI1
CON2 P03	IPSOUT\(5V output\)
CON2 P04	TWI3-SCK		PI0
CON2 P05	GND
CON2 P06	LCD0-IO0		PH7
CON2 P07	LCDIO-03		PH12
CON2 P08	LCD0-IO1		PH8
CON2 P09	LCD0-D0	LVDS0-VP0	PD0
CON2 P10	PWM0		PB2
CON2 P11	LCD0-D1	LVDS0-VN0	PD1
CON2 P12	LCD0-IO2		PH9
CON2 P13	LCD0-D2	LVDS0-VP1	PD2
CON2 P14	LCD0-DE		PD25
CON2 P15	LCD0-D3	LVDS0-VN1	PD3
CON2 P16	LCD0-VSYNC
CON2 P17	LCD0-D4	LVDS0-VP2	PD4
CON2 P18	LCD0-HSYNC
CON2 P19	LCD0-D5	LVDS0-VN2	PD5
CON2 P20	LCD0-CS
CON2 P21	LCD0-D6	LVDS0-VPC	PD6
CON2 P22	LCD0-CLK		PD24
CON2 P23	LCD0-D7	LVDS0-VNC	PD7
CON2 P24	GND
CON2 P25	LCD0-D8	LVDS0-VP3	PD8
CON2 P26	LCD0-D23		PD23
CON2 P27	LCD0-D9	LVDS0-VN3	PD9
CON2 P28	LCD0-D22		PD22
CON2 P29	LCD0-D10		PD10
CON2 P30	LCD0-D21		PD21
CON2 P31	LCD0-D11		PD11
CON2 P32	LCD0-D20		PD20
CON2 P33	LCD0-D12		PD12
CON2 P34	LCD0-D19		PD19
CON2 P35	LCD0-D13		PD13
CON2 P36	LCD0-D18		PD18
CON2 P37	LCD0-D14		PD14
CON2 P38	LCD0-D17		PD17
CON2 P39	LCD0-D15		PD15
CON2 P40	LCD0-D16		PD16

UART specification:

The jumper J11 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.

Jumper J11 of Banana pi BPI-M1
J11 Pin	Pin Name	Multiplex Function Select	GPIO
		Multi 1	Multi 2
J11 Pin1	TXD	UART0-TX	PB22
J11 Pin2	RXD	UART0-RX	PB23

The jumper J12 provides the power source including 3.3V and 5V. There is a pair of UART TX/RX signals output here.

Jumper J12 of Banana pi BPI-M1
J12 Pin	Pin Name	Multiplex Function Select	GPIO
		Multi 1	Multi 2
J12 Pin1	5V
J12 Pin2	3.3V
J12 Pin3	NC	IO-7	PH5
J12 Pin4	RXD	UART7\_RX	PI21
J12 Pin5	NC	IO-8	PH3
J12 Pin6	TXD	UART7\_TX	PI20
J12 Pin7	GND
J12 Pin8	GND

All GPIO define list:

Software

Development

Basic Development

Resources

Source code

Linux kernel 3.4 Source code : https://github.com/BPI-SINOVOIP/BPI-M1-bsp

Android 4.4 source code

LCD7 type: https://github.com/BPI-SINOVOIP/BPI-A20-Android-4.4

Android 4.2.2 source code

HDMI type: https://github.com/BPI-SINOVOIP/BPI-A20-Android

Documents

BPI-M1 Gerber/Boom/Assembly document:

Baidu cloud: https://pan.baidu.com/s/1bM8NR12Wp_dtp-m52nuKrA?pwd=8888 (pincode:8888)

Google drive: https://drive.google.com/file/d/1Zx-1LHhGKJ8l-qakd4pVvTuBXsQYIgV8/view?usp=sharing

Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the new link bpi-image Files
All banana pi docement(SCH file,DXF file,and doc)

schematic diagram:https://drive.google.com/drive/folders/0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM?resourcekey=0-ZRCiv304nGzvq-w7lwnpjg&usp=sharing
BPI-M1 DXF file download link　:　google drive
BPI-M1 3D design file download link :google drive
CE FCC RoHS : BPI-M1 CE,FCC,RoHS
Arch linux wiki for BPI-M1:https://wiki.archlinux.org/index.php/Banana_Pi
Nas for BPI-M1/BPI-M1+ : https://www.hackster.io/jeffbaocai/bananapi-pro-nas-0815dc?ref=platform&ref_id=8064_popular___&offset=3
NetBSD/evbarm on Allwinner SoCs : https://wiki.netbsd.org/ports/evbarm/allwinner/#index1h1
Gentoo for banana pi : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way
openSUSE for banana pi : https://en.opensuse.org/HCL:BananaPi
How to booting from SSD using Lubuntu / Raspbian ：https://bananapi.gitbooks.io/bpi-m1/content/en/howtobootingfromssdusinglubunturaspbian.html
Building the cluster on BPI :　https://www.hackster.io/Penguinfly/banana-pi-cluster-47d566
Allwinner documents:

allwinner chip online datasheet and documents: http://dl.linux-sunxi.org/

Image Release

Android 4.4

2018-07-28 update android 4.4 LCD version image

Features Map:http://wiki.banana-pi.org/M1_Image_Map

Baidu Drive:https://pan.baidu.com/s/1DfSIiMvW_I-kFjTZMtcVsA

Google Drive: https://drive.google.com/open?id=1qcH9baIhOphsDdlH_yBADuBiZsvrSKnt

Forum pthtread :http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-release-20180728/6357

Release Date: 2018-07-26

Baidu Drive: https://pan.baidu.com/s/1HErsANQ4PsnwQJ-tH0AdTg

Google Drive:

Ubuntu Linux

2022-09-07 Armbian_22.11.0-trunk_Bananapi_jammy_edge_5.19.6_xfce_desktop.img

Google Drive: https://drive.google.com/file/d/1WtPL8Hfr9aaE3VRnpgR_R7VYsc7O3Y9P/view?usp=sharing

Baidu Cloud: https://pan.baidu.com/s/1fM-in68EK_ABvSJ7XiY0Ag?pwd=yft7 (pincode: yft7)

Banana Pi new image: Ubuntu 16.04 with Allwinner BSP, use MPV play 1080P video,Allwinner BSP kernel 3.4 , BPI-M2 Ultra/Berry use kernel 3.10

google driver: https://drive.google.com/drive/folders/1DEO7JdMfDhHynC83K7JMxgnNxf1gV82S

discuss on forum: https://forum.banana-pi.org/t/banana-pi-new-image-ubuntu-16-04-with-allwinner-bsp-use-mpv-play-1080p-video/13272

2018-7-28 update :Ubuntu Server16.04 HDMI Version Image Link：

Features Map:http://wiki.banana-pi.org/M1_Image_Map

Baidu Drive: https://pan.baidu.com/s/1GYH8oDK3T_WcUFn-0t9YmQ

Google Drive: https://drive.google.com/open?id=13XTvWe90yvRdqNWiKCLZ0HcMgo33y2r6

Forum pthtread :http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-release-20180728/6357

Release Date: 2018-07-26

Baidu Drive: https://pan.baidu.com/s/1Tw_99XBZVOmKyavNxCXv3w

Google Drive:

Debian Linux

2022-09-07 Armbian_22.11.0-trunk_Bananapi_BPI-M1_bullseye_edge_5.19.6_xfce_desktop.img

Google Drive:https://drive.google.com/file/d/1px0h0se8EiRuBiGGxT40hWpU3RWzPedK/view?usp=sharing

Baidu Cloud: https://pan.baidu.com/s/1Vclux6Wb-ToJGOaGQxV6Hg?pwd=m4a3 (pincode: m4a3)

2019-9-18 update. Debian 10 buster mate desktop with grub support (boot-2019.07 + kernel 5.1.1)

google drive:https://drive.google.com/file/d/1uGYn3BZ9k1K1iqmmZhlCy6pXeeNwfU6P/view?usp=sharing

forum pthread:http://forum.banana-pi.org/t/bpi-m1-m1-r1-new-image-debian-10-buster-mate-desktop-with-grub-support-boot-2019-07-kernel-5-1-1/9916

Armbian image

2023-07 Armbian_23.02.0_Banana Pi BPI-M1

Baidu Cloud: https://pan.baidu.com/s/1pPh0vomR3MZozm2iLqBAmA?pwd=8888 （pincode:8888)

Google Drive:https://drive.google.com/drive/folders/1ig3DOF5V9MQ38Zlvx_1zoPh_-KNzLKKx?usp=sharing

2023-07 Armbian_23.08.0_Banana Pi BPI-M1

Baidu Cloud: https://pan.baidu.com/s/1L3ZTQt_JOWRrAcA7bZakmA?pwd=8888 (pincode:8888)

Google Drive: https://drive.google.com/drive/folders/1erfCb_sPspu3ilHW8yv4ooM66hJF7KLb?usp=sharing

Armbian_23.02.0-trunk_Bananapi_jammy_current_5.15.93.img.xz
Armbian_23.02.0-trunk_Bananapi_jammy_edge_6.1.11.img.xz

Baidu Cloud: https://pan.baidu.com/s/1hkkl22uVjvRct1V7N4OK2w?pwd=8888

Google Drive: https://drive.google.com/drive/folders/1VpvVkYMqgmSnmfKXQSrEY2B6wRa-cggL?usp=share_link

Discuss on forum: https://forum.banana-pi.org/t/banana-pi-bpi-m1-new-armbian-image/15157

2022-12-06 Armbian_22.11.0-trunk_Bananapi BPI-M1_bullseye_edge_6.0.9.img.xz

Google Drive:https://drive.google.com/file/d/1ZSFOd-nVFbAn_xB9AXckx9SEKQvnMB2J/view?usp=share_link

Baidu Cloud:https://pan.baidu.com/s/12R8mIf7_45HDtruqEvktBw?pwd=8888 (pincode: 8888)

Discuss on forum: https://forum.banana-pi.org/t/bananapi-bpi-m1-new-image-release-armbian-bullseye/14446/2

Armbian Xenial and Armbian Jessie

Image lownload link :https://www.armbian.com/bananapi/

OpenWRT

Official OpenWRT

BPI-M1/BPI-M1+/BPI-R1 use A20 chip,so easy to run openwrt
wiki : https://wiki.openwrt.org/toh/lamobo/r1
openwrt support for allwinner :https://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi?s[]=banana&s[]=pi
image download : https://downloads.openwrt.org/chaos_calmer/15.05/sunxi/generic/uboot-sunxi-Lamobo_R1/
opwrt for Allwinner Soc : https://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi?s[]=banana&s[]=pi

BPI BSP for OpenWRT

How to build OpenWRT image from github : https://bananapi.gitbooks.io/bpi-m1/content/en/howtobuildopenwrtimagefromgithub.html

FreeBSD

FreeBSD on Allwinner (sunxi) systems for banana pi

Banana pi as the official partner of Allwinner , must banana pi product use Allwinner chip design . such as A20/A31S/H3/H2+/A64/A83T , and FreeBSD have support many Allwinner . so easy to use on banana pi board.

Allwinner A20 (sun7i), a dual-core Cortex-A7 BPI-M1/BPI-M1+/BPI-R1
Allwinner A31 and A31s (sun6i), a quad-core Cortex-A7 BPI-M2
Allwinner A64 (sun50i), a quad-core Cortex-A53 BPI-M64
Allwinner A83T (sun8i), an octa-core Cortex-A7 BPI-M3
Allwinner H3 (sun8i), a quad-core Cortex-A7 BPI-M2+/BPI-M2+ EDU/

https://wiki.freebsd.org/FreeBSD/arm/Allwinner

OpenSuse

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/opensuse.html

OpenMediaVault

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/openmediavault.html

Arch Linux

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/arch_linux.html

Gentoo Linux

Gentoo Linux have officeal support banana pi BPI-M1, so you also can use on BPI-M1+,and BPI-R1, all is base on allwinner A20 chip.
gentoo linux wiki : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way

RaspBSD

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/raspbsdonbpi-m1.html

CentOS

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/centos7linuxforbpi.html

DietPi

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/dietpi.html

FreeBSD/NetBSD

inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/freebsdnetbsd.html

Lakka TV

Banana Pi M2+ with H3 chip
Banana Pi M3 with A83T chip
BPI-M1 and BPI-M1+ use A20 chip
more about this : https://bananapi.gitbooks.io/bpi-m3/content/en/lakkatv.html

http://mirror.lakka.tv/nightly/

Simplenas

simplenas image : https://simplenas.com/download/other/banana-pi-m1

FAQ

Easy to buy

SINOVOIP Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1100417230_40000003426518.html
Bipai Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1101951077_40000003418620.html
Taobao Shop: https://shop108780008.taobao.com/category-1694930629.htm
OEM&ODM, please contact: [email protected]

@@ Line 2: / Line 2: @@
 =Introduction=
-[[File:Banana_pi_BPI-M1_1.jpg|thumb|Overview]]
+[[File:Banana_pi_BPI-M1_1.jpg|thumb|[[Banana Pi BPI-M1]] with Allwinner A20 chip]]
-[[File:Banana_pi_BPI-M1_2.jpg|thumb|Overview]]
+[[File:Banana_pi_BPI-M1+_1.jpg|thumb|[[Banana Pi BPI-M1+]] with Allwinner A20 chip]]
+[[File:Banana_Pi_BPI-M4_Berry_1.jpg|thumb|[[Banana Pi BPI-M4 Berry]] H618 design]]
+[[File:BPI-M2_zero_11.JPG|thumb|[[Banana Pi BPI-M2 ZERO]] with Allwinner H3 chip]]
+[[File:BPI-F2_zero_1.JPG|thumb|[[Banana Pi BPI-P2 Zero]] with Allwinner H3 chip]]
+[[File:Banana_pi_BPI-M2+_2.jpg|thumb|[[Banana Pi BPI-M2+]] with Allwinner H3 chip]]
+[[File:Banana_pi_bpi-m2_magic_5.JPG|thumb|[[Banana Pi BPI-M2M ]] with Allwinner R16 chip design]]
+[[File:Banana_pi_BPI-M2_Berry_5.JPG|thumb|[[Banana Pi BPI-M2 Berry]] with Allwinner A40i]]
+[[File:Banana_pi_BPI-M2_Ultra_4.JPG|thumb|[[Banana Pi BPI-M2U]] with Allwinner A40i]]
+[[File:Banana_pi_BPI-M64_1.jpg|thumb|[[Banana Pi BPI-M64]] with Allwinner A64 chip design]]
+[[File:Banana_pi_BPI-M3_1.jpg|thumb|[[Banana Pi BPI-M3]] with Allwinner A83T chip design]]
 [[File:BPI-M1_3d.jpg|thumb|BPI-M1 3D ]]
 [[File:White-2.JPG|thumb|BPI-M1 with plastic case]]
@@ Line 12: / Line 22: @@
 The Banana Pi BPI-M1 is a business card-sized and low-power single-board computer featuring a high performance AllWinner A20 dual-core SoC at 1 GHz, 1 GB of DDR3 SDRAM, Gigabit Ethernet, SATA, USB, and HDMI connections. It can run a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian.
-The BPI-M1 is our first product in our goal of creating an open source devlopment board community. With a Banana Pi, we want you to explore and experience the world of DIY projects and portable computing. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
+It is the first open source hardware launched by the banana pie team, and also a classic product with the largest cumulative sales of banana pie.There are still a lot of business clients that apply to various projects.A20 chip
 Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding.
@@ Line 20: / Line 30: @@
 ==Key Features==
-* Allwinner A20 Dual-core 1.0GHz CPU（option:allwinner A40i）
+* Allwinner A20 Dual-core 1.0GHz CPU
 * Mali-400 MP2 with Open GL ES 2.0/1.1.
 * 1 GB DDR3 memory.
@@ Line 39: / Line 49: @@
 =Hardware=
-==Hardware interfact==
+==Hardware interface==
 [[File:BPI-M1_interface.jpg]]
@@ Line 75: / Line 85: @@
 ==GPIO PIN define ==
-Banana Pi BPI-M1 has a 26-pin GPIO header that matches that of the Model A and Model B Raspberry Pi. Following is the Banana Pi GPIO Pinout:
+Banana Pi BPI-M1 has a 26-pin GPIO header . Following is the Banana Pi GPIO Pinout:
 [[File:BPI-M1_26_pin.png]]
@@ Line 327: / Line 337: @@
 =Resources=
 ==Source code==
+* Linux kernel 3.4 Source code : https://github.com/BPI-SINOVOIP/BPI-M1-bsp
 * Android 4.4 source code
+:LCD7 type: https://github.com/BPI-SINOVOIP/BPI-A20-Android-4.4
+* Android 4.2.2 source code
+:HDMI type: https://github.com/BPI-SINOVOIP/BPI-A20-Android
 ==Documents==
-* schematic diagram: [https://drive.google.com/folderview?id=0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM&usp=sharing&tid=0B4PAo2nW2Kfndjh6SW9MS2xKSWs google drive]
+*BPI-M1 Gerber/Boom/Assembly document:
+:Baidu cloud: https://pan.baidu.com/s/1bM8NR12Wp_dtp-m52nuKrA?pwd=8888 (pincode:8888)
+:Google drive: https://drive.google.com/file/d/1Zx-1LHhGKJ8l-qakd4pVvTuBXsQYIgV8/view?usp=sharing
+*Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the [https://drive.google.com/drive/folders/0B_YnvHgh2rwjVjNyS2pheEtWQlk?resourcekey=0-U4TI84zIBdId7bHHjf2qKA new link bpi-image Files]
+*All banana pi [https://drive.google.com/drive/folders/0B4PAo2nW2Kfndjh6SW9MS2xKSWs?resourcekey=0-qXGFXKmd7AVy0S81OXM1RA&usp=sharing  docement(SCH file,DXF file,and doc)]
+* schematic diagram:https://drive.google.com/drive/folders/0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM?resourcekey=0-ZRCiv304nGzvq-w7lwnpjg&usp=sharing
 * BPI-M1 DXF file download link　:　[https://drive.google.com/folderview?id=0B4PAo2nW2Kfnfkd0QmxaU3F2bHBWdkFiS09vT3VoZkVyNW93OXFjM0dHRVdGazhRWmFzZDQ&usp=sharing&tid=0B4PAo2nW2Kfndjh6SW9MS2xKSWs google drive]
 *BPI-M1 3D design file download link :[https://drive.google.com/folderview?id=0B4PAo2nW2Kfnfl95clI4ZzRKUmRENWhMcmwzUlVrYW1Ic3BXZENtUjJQcjk5TXc0RHBKdlU&usp=sharing&tid=0B4PAo2nW2Kfndjh6SW9MS2xKSWs　google drive]
@@ Line 359: / Line 380: @@
 ::Google Drive:
-==Ubuntu Server==
+==Ubuntu Linux==
+*2022-09-07 Armbian_22.11.0-trunk_Bananapi_jammy_edge_5.19.6_xfce_desktop.img
+::Google Drive: https://drive.google.com/file/d/1WtPL8Hfr9aaE3VRnpgR_R7VYsc7O3Y9P/view?usp=sharing
+::Baidu Cloud: https://pan.baidu.com/s/1fM-in68EK_ABvSJ7XiY0Ag?pwd=yft7 (pincode: yft7)
+*Banana Pi new image: Ubuntu 16.04 with Allwinner BSP, use MPV play 1080P video,Allwinner BSP kernel 3.4 , BPI-M2 Ultra/Berry use kernel 3.10
+::google driver: https://drive.google.com/drive/folders/1DEO7JdMfDhHynC83K7JMxgnNxf1gV82S
+::discuss on forum: https://forum.banana-pi.org/t/banana-pi-new-image-ubuntu-16-04-with-allwinner-bsp-use-mpv-play-1080p-video/13272
 *2018-7-28 update :Ubuntu Server16.04 HDMI Version Image Link：
 ::Features Map:http://wiki.banana-pi.org/M1_Image_Map
@@ Line 369: / Line 399: @@
 ::Baidu Drive: https://pan.baidu.com/s/1Tw_99XBZVOmKyavNxCXv3w
 ::Google Drive:
+==Debian Linux==
+*2022-09-07 Armbian_22.11.0-trunk_Bananapi_BPI-M1_bullseye_edge_5.19.6_xfce_desktop.img
+::Google Drive:https://drive.google.com/file/d/1px0h0se8EiRuBiGGxT40hWpU3RWzPedK/view?usp=sharing
+::Baidu Cloud: https://pan.baidu.com/s/1Vclux6Wb-ToJGOaGQxV6Hg?pwd=m4a3 (pincode: m4a3)
+*2019-9-18 update. Debian 10 buster mate desktop with grub support (boot-2019.07 + kernel 5.1.1)
+::google drive:https://drive.google.com/file/d/1uGYn3BZ9k1K1iqmmZhlCy6pXeeNwfU6P/view?usp=sharing
+::forum pthread:http://forum.banana-pi.org/t/bpi-m1-m1-r1-new-image-debian-10-buster-mate-desktop-with-grub-support-boot-2019-07-kernel-5-1-1/9916
 == Armbian image ==
+*2023-07 Armbian_23.02.0_Banana Pi BPI-M1
+:Baidu Cloud: https://pan.baidu.com/s/1pPh0vomR3MZozm2iLqBAmA?pwd=8888 （pincode:8888)
+:Google Drive:https://drive.google.com/drive/folders/1ig3DOF5V9MQ38Zlvx_1zoPh_-KNzLKKx?usp=sharing
+*2023-07 Armbian_23.08.0_Banana Pi BPI-M1
+:Baidu Cloud: https://pan.baidu.com/s/1L3ZTQt_JOWRrAcA7bZakmA?pwd=8888 (pincode:8888)
+:Google Drive: https://drive.google.com/drive/folders/1erfCb_sPspu3ilHW8yv4ooM66hJF7KLb?usp=sharing
+*Armbian_23.02.0-trunk_Bananapi_jammy_current_5.15.93.img.xz
+*Armbian_23.02.0-trunk_Bananapi_jammy_edge_6.1.11.img.xz
+:Baidu Cloud: https://pan.baidu.com/s/1hkkl22uVjvRct1V7N4OK2w?pwd=8888
+:Google Drive:  https://drive.google.com/drive/folders/1VpvVkYMqgmSnmfKXQSrEY2B6wRa-cggL?usp=share_link
+:Discuss on forum: https://forum.banana-pi.org/t/banana-pi-bpi-m1-new-armbian-image/15157
+*2022-12-06 Armbian_22.11.0-trunk_Bananapi BPI-M1_bullseye_edge_6.0.9.img.xz
+:Google Drive:https://drive.google.com/file/d/1ZSFOd-nVFbAn_xB9AXckx9SEKQvnMB2J/view?usp=share_link
+:Baidu Cloud:https://pan.baidu.com/s/12R8mIf7_45HDtruqEvktBw?pwd=8888 (pincode: 8888)
+::Discuss on forum: https://forum.banana-pi.org/t/bananapi-bpi-m1-new-image-release-armbian-bullseye/14446/2
 *Armbian Xenial and Armbian Jessie
-::Image lownload link :https://www.armbian.com/bananapi/
+:Image lownload link :https://www.armbian.com/bananapi/
 ==OpenWRT==
-===Officeal OpenWRT===
+===Official OpenWRT===
 *BPI-M1/BPI-M1+/BPI-R1 use A20 chip,so easy to run openwrt
 *wiki : https://wiki.openwrt.org/toh/lamobo/r1
@@ Line 408: / Line 469: @@
 ==Gentoo Linux==
-*inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/gentoolinux.html
+*Gentoo Linux have officeal support banana pi BPI-M1, so you also can use on BPI-M1+,and BPI-R1, all is base on allwinner A20 chip.
+*gentoo linux wiki : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way
 ==RaspBSD==
@@ Line 434: / Line 496: @@
 =FAQ=
+=Easy to buy=
+*SINOVOIP Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1100417230_40000003426518.html
+*Bipai Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1101951077_40000003418620.html
+*Taobao Shop: https://shop108780008.taobao.com/category-1694930629.htm
+*OEM&ODM, please contact: [email protected]

Difference between revisions of "Banana Pi BPI-M1"