Difference between revisions of "Banana Pi BPI-M1"
(→Documents) |
|||
(118 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
− | + | [[zh:香蕉派_BPI-M1]] | |
− | + | =Introduction= | |
− | | | + | |
− | + | [[File:Banana_pi_BPI-M1_1.jpg|thumb|[[Banana Pi BPI-M1]] with Allwinner A20 chip]] | |
− | | | + | [[File:Banana_pi_BPI-M1+_1.jpg|thumb|[[Banana Pi BPI-M1+]] with Allwinner A20 chip]] |
− | + | [[File:Banana_Pi_BPI-M4_Berry_1.jpg|thumb|[[Banana Pi BPI-M4 Berry]] H618 design]] | |
− | + | [[File:BPI-M2_zero_11.JPG|thumb|[[Banana Pi BPI-M2 ZERO]] with Allwinner H3 chip]] | |
− | | | + | [[File:BPI-F2_zero_1.JPG|thumb|[[Banana Pi BPI-P2 Zero]] with Allwinner H3 chip]] |
− | | | + | [[File:Banana_pi_BPI-M2+_2.jpg|thumb|[[Banana Pi BPI-M2+]] with Allwinner H3 chip]] |
− | | | + | [[File:Banana_pi_bpi-m2_magic_5.JPG|thumb|[[Banana Pi BPI-M2M ]] with Allwinner R16 chip design]] |
− | | | + | [[File:Banana_pi_BPI-M2_Berry_5.JPG|thumb|[[Banana Pi BPI-M2 Berry]] with Allwinner A40i]] |
− | + | [[File:Banana_pi_BPI-M2_Ultra_4.JPG|thumb|[[Banana Pi BPI-M2U]] with Allwinner A40i]] | |
− | + | [[File:Banana_pi_BPI-M64_1.jpg|thumb|[[Banana Pi BPI-M64]] with Allwinner A64 chip design]] | |
− | | | + | [[File:Banana_pi_BPI-M3_1.jpg|thumb|[[Banana Pi BPI-M3]] with Allwinner A83T chip design]] |
− | | | + | |
− | + | [[File:BPI-M1_3d.jpg|thumb|BPI-M1 3D ]] | |
− | + | [[File:White-2.JPG|thumb|BPI-M1 with plastic case]] | |
− | + | [[File:MultiQB_front.jpg|thumb|BPI-M1/M1+ for BPI 4.0 [[Successful case]] : smart home gateway]] | |
− | + | [[File:IMG_3036.JPG|thumb|BPI-M1/M1+ for BPI 4.0 [[Successful case]] :3G Information security terminal]] | |
− | The | + | [[File:IMG_3085.JPG|thumb|BPI-M1/M1+ for BPI 4.0 [[Successful case]] :4G Industrial safety tablets]] |
+ | |||
+ | The Banana Pi BPI-M1 is a business card-sized and low-power single-board computer featuring a high performance AllWinner A20 dual-core SoC at 1 GHz, 1 GB of DDR3 SDRAM, Gigabit Ethernet, SATA, USB, and HDMI connections. It can run a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian. | ||
+ | |||
+ | It is the first open source hardware launched by the banana pie team, and also a classic product with the largest cumulative sales of banana pie.There are still a lot of business clients that apply to various projects.A20 chip | ||
+ | |||
+ | Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. | ||
+ | |||
+ | [[File:A_BPI-M1.jpg]] | ||
+ | |||
+ | ==Key Features== | ||
+ | |||
+ | * Allwinner A20 Dual-core 1.0GHz CPU | ||
+ | * Mali-400 MP2 with Open GL ES 2.0/1.1. | ||
+ | * 1 GB DDR3 memory. | ||
+ | * 1x SATA interface. | ||
+ | * 1x Gigabit LAN | ||
+ | * 1x USB otg and 2x USB 2.0 | ||
+ | * 1X MIC | ||
+ | * AV vide out | ||
+ | * HDMI out | ||
+ | * IR | ||
+ | * CSI camera interface | ||
+ | * DSI display interface | ||
+ | * 26 PIN gpio | ||
+ | |||
+ | ==Getting Start== | ||
+ | *[[Quick Start Banana pi SBC]] | ||
+ | *[[Getting Started with M1]] | ||
+ | |||
+ | =Hardware= | ||
+ | ==Hardware interface== | ||
+ | [[File:BPI-M1_interface.jpg]] | ||
+ | |||
+ | ==Hardware spec== | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | | style="background: PaleTurquoise; color: black" colspan="4"| '''Banana Pi BPI-M1''' | ||
+ | |- | ||
+ | | CPU|| A20 ARM Cortex -A7 Dual-Core | ||
+ | |- | ||
+ | | GPU|| ARM Mali 400 MP2; Complies with OpenGL ES 2.0/1.1 | ||
+ | |- | ||
+ | | Memory|| 1GB DDR3 | ||
+ | |- | ||
+ | | Network|| 10/100/1000 Ethernet [[Modular connector|8P8C]] ([[1000BASE-T]]) | ||
+ | |- | ||
+ | | Video Input|| A CSI input connector allows for the connection of a designed camera module | ||
+ | |- | ||
+ | | Video Outputs|| HDMI, CVBS, LVDS/RGB | ||
+ | |- | ||
+ | | Audio Outputs|| 3.5mm jack and HDMI | ||
+ | |- | ||
+ | | Power Source|| 5 volts DC via Micro USB or GPIO | ||
+ | |- | ||
+ | | USB 2.0 ports|| 2 (direct from Allwinner A20 chip) | ||
+ | |- | ||
+ | | GPIO|| GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, [[CAN bus]], ADC, PWM, +3.3V, +5V, GND | ||
+ | |- | ||
+ | | LED|| Power Key & 8P8C | ||
+ | |- | ||
+ | | Storage|| SATA 2.0, | ||
+ | |} | ||
+ | |||
+ | ==GPIO PIN define == | ||
+ | |||
+ | Banana Pi BPI-M1 has a 26-pin GPIO header . Following is the Banana Pi GPIO Pinout: | ||
+ | |||
+ | [[File:BPI-M1_26_pin.png]] | ||
+ | |||
+ | Note: 5V1,5V2 only support output,not support input | ||
+ | |||
+ | '''CSI Camera Connector specification:''' | ||
+ | |||
+ | CSI Camera Connector The CSI Camera Connector is a 40-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin definitions of the CSI interface are shown as below. This is marked on the Banana Pi board as “CON1″. | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | + | | style="background: PaleTurquoise; color: black" colspan="4"| '''40 PIN GPIO of Banana pi BPI-M1''' | |
− | + | |- | |
+ | | CSI GPIO Pin || Pin Name || GPIO | ||
+ | |- | ||
+ | | CON1 P01 || LINEINL || | ||
+ | |- | ||
+ | | CON1 P02 || LINEINR || | ||
+ | |- | ||
+ | | CON1 P03 || VCC-CSI || | ||
+ | |- | ||
+ | | CON1 P04 || ADC\_X1 || | ||
+ | |- | ||
+ | | CON1 P05 || GND || | ||
+ | |- | ||
+ | | CON1 P06 || ADC\_X2 || | ||
+ | |- | ||
+ | | CON1 P07 || FMINL || | ||
+ | |- | ||
+ | | CON1 P08 || ADC\_Y1 || | ||
+ | |- | ||
+ | | CON1 P09 || FMINR || | ||
+ | |- | ||
+ | | CON1 P10 || ADC\_Y2 || | ||
+ | |- | ||
+ | | CON1 P11 || GND || | ||
+ | |- | ||
+ | | CON1 P12 || CSI-FLASH || PH17 | ||
+ | |- | ||
+ | | CON1 P13 || LRADC0 || | ||
+ | |- | ||
+ | | CON1 P14 || TWI1-SDA || PB19 | ||
+ | |- | ||
+ | | CON1 P15 || LRADC1 || | ||
+ | |- | ||
+ | | CON1 P16 || TWI1-SCK || PB18 | ||
+ | |- | ||
+ | | CON1 P17 || CSI-D0 || PE4 | ||
+ | |- | ||
+ | | CON1 P18 || CSI0-STBY-EN || PH19 | ||
+ | |- | ||
+ | | CON1 P19 || CSI0-D1 || PE5 | ||
+ | |- | ||
+ | | CON1 P20 || CSI-PCLK || PE0 | ||
+ | |- | ||
+ | | CON1 P21 || CSI-D2 || PE6 | ||
+ | |- | ||
+ | | CON1 P22 || CSI0-PWR-EN || PH16 | ||
|- | |- | ||
− | + | | CON1 P23 || CSI-D3 || PE7 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P24 || CSI0-MCLK || PE1 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P25 || CSI-D4 || PE8 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P26 || CSI0-RESET\# || PH14 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P27 || CSI-D5 || PE9 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P28 || CSI-VSYNC || PE3 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P29 || CSI-D6 || PE10 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P30 || CSI-HSYNC || PE2 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P31 || CSI-D7 || PE11 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P32 || CSI1-STBY-EN || PH18 | |
− | | | ||
|- | |- | ||
− | + | | CON1 P33 || RESET\# || | |
− | | | ||
|- | |- | ||
− | + | | CON1 P34 || CSI1-RESET\# || PH13 | |
− | | | + | |- |
+ | | CON1 P35 || CSI-IO0 || PH11 | ||
+ | |- | ||
+ | | CON1 P36 || HPR || | ||
+ | |- | ||
+ | | CON1 P37 || HPL || | ||
+ | |- | ||
+ | | CON1 P38 || IPSOUT || | ||
+ | |- | ||
+ | | CON1 P39 || GND || | ||
+ | |- | ||
+ | | CON1 P40 || IPSOUT || | ||
+ | |- | ||
|} | |} | ||
− | |||
− | + | '''LVDS \(LCD display interface\)''' | |
− | + | ||
+ | The LVDS Connector is a 40-pin FPC connector which can connect external LCD panel \(LVDS\) and touch screen \(I2C\) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as “CON2″. | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | | style="background: PaleTurquoise; color: black" colspan="4"| '''LVDS GPIO of Banana pi BPI-M1''' | ||
+ | |- | ||
+ | | LVDS Pin || Pin Name || Multiplex Function Select || GPIO | ||
+ | |- | ||
+ | | || ||Multi 1 || Multi 2 | ||
+ | |- | ||
+ | | CON2 P01 || IPSOUT\(5V output\) || || | ||
+ | |- | ||
+ | | CON2 P02 || TWI3-SDA || || PI1 | ||
+ | |- | ||
+ | | CON2 P03 || IPSOUT\(5V output\) || || | ||
+ | |- | ||
+ | | CON2 P04 || TWI3-SCK || || PI0 | ||
+ | |- | ||
+ | | CON2 P05 || GND || || | ||
+ | |- | ||
+ | | CON2 P06 || LCD0-IO0 || || PH7 | ||
+ | |- | ||
+ | | CON2 P07 || LCDIO-03 || || PH12 | ||
+ | |- | ||
+ | | CON2 P08 || LCD0-IO1 || || PH8 | ||
+ | |- | ||
+ | | CON2 P09 || LCD0-D0 || LVDS0-VP0 || PD0 | ||
+ | |- | ||
+ | | CON2 P10 || PWM0 || || PB2 | ||
+ | |- | ||
+ | | CON2 P11 || LCD0-D1 || LVDS0-VN0 || PD1 | ||
+ | |- | ||
+ | | CON2 P12 || LCD0-IO2 || || PH9 | ||
+ | |- | ||
+ | | CON2 P13 || LCD0-D2 || LVDS0-VP1 || PD2 | ||
+ | |- | ||
+ | | CON2 P14 || LCD0-DE || || PD25 | ||
+ | |- | ||
+ | | CON2 P15 || LCD0-D3 || LVDS0-VN1 || PD3 | ||
+ | |- | ||
+ | | CON2 P16 || LCD0-VSYNC || || PD27 | | ||
+ | |- | ||
+ | | CON2 P17 || LCD0-D4 || LVDS0-VP2 || PD4 | ||
+ | |- | ||
+ | | CON2 P18 || LCD0-HSYNC || || PD26 | | ||
+ | |- | ||
+ | | CON2 P19 || LCD0-D5 || LVDS0-VN2 || PD5 | ||
+ | |- | ||
+ | | CON2 P20 || LCD0-CS || || PH6 | | ||
+ | |- | ||
+ | | CON2 P21 || LCD0-D6 || LVDS0-VPC || PD6 | ||
+ | |- | ||
+ | | CON2 P22 || LCD0-CLK || || PD24 | ||
+ | |- | ||
+ | | CON2 P23 || LCD0-D7 || LVDS0-VNC || PD7 | ||
+ | |- | ||
+ | | CON2 P24 || GND || || | ||
+ | |- | ||
+ | | CON2 P25 || LCD0-D8 || LVDS0-VP3 || PD8 | ||
+ | |- | ||
+ | | CON2 P26 || LCD0-D23 || || PD23 | ||
+ | |- | ||
+ | | CON2 P27 || LCD0-D9 || LVDS0-VN3 || PD9 | ||
+ | |- | ||
+ | | CON2 P28 || LCD0-D22 || || PD22 | ||
+ | |- | ||
+ | | CON2 P29 || LCD0-D10 || || PD10 | ||
+ | |- | ||
+ | | CON2 P30 || LCD0-D21 || || PD21 | ||
+ | |- | ||
+ | | CON2 P31 || LCD0-D11 || || PD11 | ||
+ | |- | ||
+ | | CON2 P32 || LCD0-D20 || || PD20 | ||
+ | |- | ||
+ | | CON2 P33 ||LCD0-D12 || || PD12 | ||
+ | |- | ||
+ | | CON2 P34 || LCD0-D19 || || PD19 | ||
+ | |- | ||
+ | | CON2 P35 || LCD0-D13 || || PD13 | ||
+ | |- | ||
+ | | CON2 P36 || LCD0-D18 || || PD18 | ||
+ | |- | ||
+ | | CON2 P37 || LCD0-D14 || || PD14 | ||
+ | |- | ||
+ | | CON2 P38 || LCD0-D17 || || PD17 | ||
+ | |- | ||
+ | | CON2 P39 || LCD0-D15 || || PD15 | ||
+ | |- | ||
+ | | CON2 P40 || LCD0-D16 || || PD16 | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | '''UART specification:''' | ||
+ | |||
+ | The jumper J11 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message. | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | | style="background: PaleTurquoise; color: black" colspan="4"| '''Jumper J11 of Banana pi BPI-M1''' | ||
+ | |- | ||
+ | | J11 Pin || Pin Name || Multiplex Function Select || GPIO | ||
+ | |- | ||
+ | | || || Multi 1 || Multi 2 | ||
+ | |- | ||
+ | | J11 Pin1 || TXD || UART0-TX || PB22 | ||
+ | |- | ||
+ | | J11 Pin2 || RXD || UART0-RX || PB23 | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | |||
+ | The jumper J12 provides the power source including 3.3V and 5V. There is a pair of UART TX/RX signals output here. | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |- | ||
+ | | style="background: PaleTurquoise; color: black" colspan="4"| '''Jumper J12 of Banana pi BPI-M1''' | ||
+ | |- | ||
+ | | J12 Pin || Pin Name || Multiplex Function Select || GPIO | ||
+ | |- | ||
+ | | || ||Multi 1 || Multi 2 | ||
+ | |- | ||
+ | | J12 Pin1 || 5V || || | ||
+ | |- | ||
+ | | J12 Pin2 || 3.3V || || | ||
+ | |- | ||
+ | | J12 Pin3 || NC || IO-7 || PH5 | ||
+ | |- | ||
+ | | J12 Pin4 || RXD || UART7\_RX || PI21 | ||
+ | |- | ||
+ | | J12 Pin5 || NC ||IO-8 || PH3 | ||
+ | |- | ||
+ | | J12 Pin6 || TXD || UART7\_TX || PI20 | ||
+ | |- | ||
+ | | J12 Pin7 || GND || || | ||
+ | |- | ||
+ | | J12 Pin8 || GND || || | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | '''All GPIO define list:''' | ||
+ | |||
+ | [[File:BPI-M1_all_pin.png]] | ||
+ | |||
+ | =Software= | ||
+ | |||
+ | =Development= | ||
+ | |||
+ | ==Basic Development== | ||
+ | |||
+ | =Resources= | ||
+ | ==Source code== | ||
+ | * Linux kernel 3.4 Source code : https://github.com/BPI-SINOVOIP/BPI-M1-bsp | ||
+ | |||
+ | * Android 4.4 source code | ||
+ | :LCD7 type: https://github.com/BPI-SINOVOIP/BPI-A20-Android-4.4 | ||
+ | |||
+ | * Android 4.2.2 source code | ||
+ | :HDMI type: https://github.com/BPI-SINOVOIP/BPI-A20-Android | ||
+ | |||
+ | ==Documents== | ||
+ | *BPI-M1 Gerber/Boom/Assembly document: | ||
+ | :Baidu cloud: https://pan.baidu.com/s/1bM8NR12Wp_dtp-m52nuKrA?pwd=8888 (pincode:8888) | ||
+ | :Google drive: https://drive.google.com/file/d/1Zx-1LHhGKJ8l-qakd4pVvTuBXsQYIgV8/view?usp=sharing | ||
+ | |||
+ | *Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the [https://drive.google.com/drive/folders/0B_YnvHgh2rwjVjNyS2pheEtWQlk?resourcekey=0-U4TI84zIBdId7bHHjf2qKA new link bpi-image Files] | ||
+ | *All banana pi [https://drive.google.com/drive/folders/0B4PAo2nW2Kfndjh6SW9MS2xKSWs?resourcekey=0-qXGFXKmd7AVy0S81OXM1RA&usp=sharing docement(SCH file,DXF file,and doc)] | ||
+ | |||
+ | * schematic diagram:https://drive.google.com/drive/folders/0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM?resourcekey=0-ZRCiv304nGzvq-w7lwnpjg&usp=sharing | ||
+ | * BPI-M1 DXF file download link : [https://drive.google.com/folderview?id=0B4PAo2nW2Kfnfkd0QmxaU3F2bHBWdkFiS09vT3VoZkVyNW93OXFjM0dHRVdGazhRWmFzZDQ&usp=sharing&tid=0B4PAo2nW2Kfndjh6SW9MS2xKSWs google drive] | ||
+ | *BPI-M1 3D design file download link :[https://drive.google.com/folderview?id=0B4PAo2nW2Kfnfl95clI4ZzRKUmRENWhMcmwzUlVrYW1Ic3BXZENtUjJQcjk5TXc0RHBKdlU&usp=sharing&tid=0B4PAo2nW2Kfndjh6SW9MS2xKSWs google drive] | ||
+ | *CE FCC RoHS : [https://bananapi.gitbooks.io/bpi-m1/content/en/bpi-m1_ce_fcc_rohs_certification.html BPI-M1 CE,FCC,RoHS ] | ||
+ | *Arch linux wiki for BPI-M1:https://wiki.archlinux.org/index.php/Banana_Pi | ||
+ | *Nas for BPI-M1/BPI-M1+ : https://www.hackster.io/jeffbaocai/bananapi-pro-nas-0815dc?ref=platform&ref_id=8064_popular___&offset=3 | ||
+ | *NetBSD/evbarm on Allwinner SoCs : https://wiki.netbsd.org/ports/evbarm/allwinner/#index1h1 | ||
+ | *Gentoo for banana pi : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way | ||
+ | *openSUSE for banana pi : https://en.opensuse.org/HCL:BananaPi | ||
+ | *How to booting from SSD using Lubuntu / Raspbian :https://bananapi.gitbooks.io/bpi-m1/content/en/howtobootingfromssdusinglubunturaspbian.html | ||
+ | *Building the cluster on BPI : https://www.hackster.io/Penguinfly/banana-pi-cluster-47d566 | ||
+ | * Allwinner documents: | ||
+ | ::allwinner chip online datasheet and documents: http://dl.linux-sunxi.org/ | ||
+ | |||
+ | =Image Release= | ||
+ | |||
+ | ==Android 4.4== | ||
+ | *2018-07-28 update android 4.4 LCD version image | ||
+ | ::Features Map:http://wiki.banana-pi.org/M1_Image_Map | ||
+ | ::Baidu Drive:https://pan.baidu.com/s/1DfSIiMvW_I-kFjTZMtcVsA | ||
+ | ::Google Drive: https://drive.google.com/open?id=1qcH9baIhOphsDdlH_yBADuBiZsvrSKnt | ||
+ | ::Forum pthtread :http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-release-20180728/6357 | ||
+ | |||
+ | * Release Date: 2018-07-26 | ||
+ | ::Baidu Drive: https://pan.baidu.com/s/1HErsANQ4PsnwQJ-tH0AdTg | ||
+ | ::Google Drive: | ||
+ | |||
+ | ==Ubuntu Linux== | ||
+ | |||
+ | *2022-09-07 Armbian_22.11.0-trunk_Bananapi_jammy_edge_5.19.6_xfce_desktop.img | ||
+ | ::Google Drive: https://drive.google.com/file/d/1WtPL8Hfr9aaE3VRnpgR_R7VYsc7O3Y9P/view?usp=sharing | ||
+ | ::Baidu Cloud: https://pan.baidu.com/s/1fM-in68EK_ABvSJ7XiY0Ag?pwd=yft7 (pincode: yft7) | ||
+ | |||
+ | *Banana Pi new image: Ubuntu 16.04 with Allwinner BSP, use MPV play 1080P video,Allwinner BSP kernel 3.4 , BPI-M2 Ultra/Berry use kernel 3.10 | ||
+ | ::google driver: https://drive.google.com/drive/folders/1DEO7JdMfDhHynC83K7JMxgnNxf1gV82S | ||
+ | ::discuss on forum: https://forum.banana-pi.org/t/banana-pi-new-image-ubuntu-16-04-with-allwinner-bsp-use-mpv-play-1080p-video/13272 | ||
+ | |||
+ | *2018-7-28 update :Ubuntu Server16.04 HDMI Version Image Link: | ||
+ | ::Features Map:http://wiki.banana-pi.org/M1_Image_Map | ||
+ | ::Baidu Drive: https://pan.baidu.com/s/1GYH8oDK3T_WcUFn-0t9YmQ | ||
+ | ::Google Drive: https://drive.google.com/open?id=13XTvWe90yvRdqNWiKCLZ0HcMgo33y2r6 | ||
+ | ::Forum pthtread :http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-release-20180728/6357 | ||
+ | |||
+ | * Release Date: 2018-07-26 | ||
+ | ::Baidu Drive: https://pan.baidu.com/s/1Tw_99XBZVOmKyavNxCXv3w | ||
+ | ::Google Drive: | ||
+ | |||
+ | ==Debian Linux== | ||
+ | |||
+ | *2022-09-07 Armbian_22.11.0-trunk_Bananapi_BPI-M1_bullseye_edge_5.19.6_xfce_desktop.img | ||
+ | ::Google Drive:https://drive.google.com/file/d/1px0h0se8EiRuBiGGxT40hWpU3RWzPedK/view?usp=sharing | ||
+ | ::Baidu Cloud: https://pan.baidu.com/s/1Vclux6Wb-ToJGOaGQxV6Hg?pwd=m4a3 (pincode: m4a3) | ||
+ | |||
+ | *2019-9-18 update. Debian 10 buster mate desktop with grub support (boot-2019.07 + kernel 5.1.1) | ||
+ | ::google drive:https://drive.google.com/file/d/1uGYn3BZ9k1K1iqmmZhlCy6pXeeNwfU6P/view?usp=sharing | ||
+ | ::forum pthread:http://forum.banana-pi.org/t/bpi-m1-m1-r1-new-image-debian-10-buster-mate-desktop-with-grub-support-boot-2019-07-kernel-5-1-1/9916 | ||
+ | |||
+ | == Armbian image == | ||
+ | *2023-07 Armbian_23.02.0_Banana Pi BPI-M1 | ||
+ | :Baidu Cloud: https://pan.baidu.com/s/1pPh0vomR3MZozm2iLqBAmA?pwd=8888 (pincode:8888) | ||
+ | :Google Drive:https://drive.google.com/drive/folders/1ig3DOF5V9MQ38Zlvx_1zoPh_-KNzLKKx?usp=sharing | ||
+ | |||
+ | *2023-07 Armbian_23.08.0_Banana Pi BPI-M1 | ||
+ | :Baidu Cloud: https://pan.baidu.com/s/1L3ZTQt_JOWRrAcA7bZakmA?pwd=8888 (pincode:8888) | ||
+ | :Google Drive: https://drive.google.com/drive/folders/1erfCb_sPspu3ilHW8yv4ooM66hJF7KLb?usp=sharing | ||
+ | |||
+ | *Armbian_23.02.0-trunk_Bananapi_jammy_current_5.15.93.img.xz | ||
+ | *Armbian_23.02.0-trunk_Bananapi_jammy_edge_6.1.11.img.xz | ||
+ | :Baidu Cloud: https://pan.baidu.com/s/1hkkl22uVjvRct1V7N4OK2w?pwd=8888 | ||
+ | :Google Drive: https://drive.google.com/drive/folders/1VpvVkYMqgmSnmfKXQSrEY2B6wRa-cggL?usp=share_link | ||
+ | :Discuss on forum: https://forum.banana-pi.org/t/banana-pi-bpi-m1-new-armbian-image/15157 | ||
+ | |||
+ | |||
+ | *2022-12-06 Armbian_22.11.0-trunk_Bananapi BPI-M1_bullseye_edge_6.0.9.img.xz | ||
+ | :Google Drive:https://drive.google.com/file/d/1ZSFOd-nVFbAn_xB9AXckx9SEKQvnMB2J/view?usp=share_link | ||
+ | :Baidu Cloud:https://pan.baidu.com/s/12R8mIf7_45HDtruqEvktBw?pwd=8888 (pincode: 8888) | ||
+ | ::Discuss on forum: https://forum.banana-pi.org/t/bananapi-bpi-m1-new-image-release-armbian-bullseye/14446/2 | ||
+ | |||
+ | |||
+ | *Armbian Xenial and Armbian Jessie | ||
+ | :Image lownload link :https://www.armbian.com/bananapi/ | ||
+ | |||
+ | ==OpenWRT== | ||
+ | ===Official OpenWRT=== | ||
+ | *BPI-M1/BPI-M1+/BPI-R1 use A20 chip,so easy to run openwrt | ||
+ | *wiki : https://wiki.openwrt.org/toh/lamobo/r1 | ||
+ | *openwrt support for allwinner :https://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi?s[]=banana&s[]=pi | ||
+ | *image download : https://downloads.openwrt.org/chaos_calmer/15.05/sunxi/generic/uboot-sunxi-Lamobo_R1/ | ||
+ | *opwrt for Allwinner Soc : https://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi?s[]=banana&s[]=pi | ||
+ | |||
+ | ===BPI BSP for OpenWRT=== | ||
+ | *How to build OpenWRT image from github : https://bananapi.gitbooks.io/bpi-m1/content/en/howtobuildopenwrtimagefromgithub.html | ||
+ | |||
+ | ==FreeBSD== | ||
+ | |||
+ | FreeBSD on Allwinner (sunxi) systems for banana pi | ||
+ | |||
+ | Banana pi as the official partner of Allwinner , must banana pi product use Allwinner chip design . such as A20/A31S/H3/H2+/A64/A83T , and FreeBSD have support many Allwinner . so easy to use on banana pi board. | ||
+ | *Allwinner A20 (sun7i), a dual-core Cortex-A7 BPI-M1/BPI-M1+/BPI-R1 | ||
+ | *Allwinner A31 and A31s (sun6i), a quad-core Cortex-A7 BPI-M2 | ||
+ | *Allwinner A64 (sun50i), a quad-core Cortex-A53 BPI-M64 | ||
+ | *Allwinner A83T (sun8i), an octa-core Cortex-A7 BPI-M3 | ||
+ | *Allwinner H3 (sun8i), a quad-core Cortex-A7 BPI-M2+/BPI-M2+ EDU/ | ||
+ | |||
+ | https://wiki.freebsd.org/FreeBSD/arm/Allwinner | ||
+ | |||
+ | ==OpenSuse== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/opensuse.html | ||
+ | |||
+ | ==OpenMediaVault== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/openmediavault.html | ||
+ | |||
+ | ==Arch Linux== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/arch_linux.html | ||
+ | |||
+ | ==Gentoo Linux== | ||
+ | *Gentoo Linux have officeal support banana pi BPI-M1, so you also can use on BPI-M1+,and BPI-R1, all is base on allwinner A20 chip. | ||
+ | *gentoo linux wiki : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way | ||
+ | |||
+ | ==RaspBSD== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/raspbsdonbpi-m1.html | ||
+ | |||
+ | ==CentOS== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/centos7linuxforbpi.html | ||
+ | |||
+ | ==DietPi== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/dietpi.html | ||
+ | |||
+ | ==FreeBSD/NetBSD== | ||
+ | *inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/freebsdnetbsd.html | ||
+ | |||
+ | ==Lakka TV== | ||
+ | *Banana Pi M2+ with H3 chip | ||
+ | *Banana Pi M3 with A83T chip | ||
+ | *BPI-M1 and BPI-M1+ use A20 chip | ||
+ | *more about this : https://bananapi.gitbooks.io/bpi-m3/content/en/lakkatv.html | ||
+ | |||
+ | http://mirror.lakka.tv/nightly/ | ||
+ | |||
+ | ==Simplenas== | ||
+ | *simplenas image : https://simplenas.com/download/other/banana-pi-m1 | ||
+ | |||
+ | =FAQ= | ||
+ | |||
+ | =Easy to buy= | ||
+ | *SINOVOIP Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1100417230_40000003426518.html | ||
+ | *Bipai Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1101951077_40000003418620.html | ||
+ | *Taobao Shop: https://shop108780008.taobao.com/category-1694930629.htm | ||
+ | *OEM&ODM, please contact: judyhuang@banana-pi.com |
Latest revision as of 01:12, 20 March 2024
Contents
Introduction
The Banana Pi BPI-M1 is a business card-sized and low-power single-board computer featuring a high performance AllWinner A20 dual-core SoC at 1 GHz, 1 GB of DDR3 SDRAM, Gigabit Ethernet, SATA, USB, and HDMI connections. It can run a variety of operating systems including Android, Lubuntu, Ubuntu, Debian, and Raspbian.
It is the first open source hardware launched by the banana pie team, and also a classic product with the largest cumulative sales of banana pie.There are still a lot of business clients that apply to various projects.A20 chip
Banana Pi is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding.
Key Features
- Allwinner A20 Dual-core 1.0GHz CPU
- Mali-400 MP2 with Open GL ES 2.0/1.1.
- 1 GB DDR3 memory.
- 1x SATA interface.
- 1x Gigabit LAN
- 1x USB otg and 2x USB 2.0
- 1X MIC
- AV vide out
- HDMI out
- IR
- CSI camera interface
- DSI display interface
- 26 PIN gpio
Getting Start
Hardware
Hardware interface
Hardware spec
Banana Pi BPI-M1 | |||
CPU | A20 ARM Cortex -A7 Dual-Core | ||
GPU | ARM Mali 400 MP2; Complies with OpenGL ES 2.0/1.1 | ||
Memory | 1GB DDR3 | ||
Network | 10/100/1000 Ethernet 8P8C (1000BASE-T) | ||
Video Input | A CSI input connector allows for the connection of a designed camera module | ||
Video Outputs | HDMI, CVBS, LVDS/RGB | ||
Audio Outputs | 3.5mm jack and HDMI | ||
Power Source | 5 volts DC via Micro USB or GPIO | ||
USB 2.0 ports | 2 (direct from Allwinner A20 chip) | ||
GPIO | GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, CAN bus, ADC, PWM, +3.3V, +5V, GND | ||
LED | Power Key & 8P8C | ||
Storage | SATA 2.0, |
GPIO PIN define
Banana Pi BPI-M1 has a 26-pin GPIO header . Following is the Banana Pi GPIO Pinout:
Note: 5V1,5V2 only support output,not support input
CSI Camera Connector specification:
CSI Camera Connector The CSI Camera Connector is a 40-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin definitions of the CSI interface are shown as below. This is marked on the Banana Pi board as “CON1″.
40 PIN GPIO of Banana pi BPI-M1 | |||
CSI GPIO Pin | Pin Name | GPIO | |
CON1 P01 | LINEINL | ||
CON1 P02 | LINEINR | ||
CON1 P03 | VCC-CSI | ||
CON1 P04 | ADC\_X1 | ||
CON1 P05 | GND | ||
CON1 P06 | ADC\_X2 | ||
CON1 P07 | FMINL | ||
CON1 P08 | ADC\_Y1 | ||
CON1 P09 | FMINR | ||
CON1 P10 | ADC\_Y2 | ||
CON1 P11 | GND | ||
CON1 P12 | CSI-FLASH | PH17 | |
CON1 P13 | LRADC0 | ||
CON1 P14 | TWI1-SDA | PB19 | |
CON1 P15 | LRADC1 | ||
CON1 P16 | TWI1-SCK | PB18 | |
CON1 P17 | CSI-D0 | PE4 | |
CON1 P18 | CSI0-STBY-EN | PH19 | |
CON1 P19 | CSI0-D1 | PE5 | |
CON1 P20 | CSI-PCLK | PE0 | |
CON1 P21 | CSI-D2 | PE6 | |
CON1 P22 | CSI0-PWR-EN | PH16 | |
CON1 P23 | CSI-D3 | PE7 | |
CON1 P24 | CSI0-MCLK | PE1 | |
CON1 P25 | CSI-D4 | PE8 | |
CON1 P26 | CSI0-RESET\# | PH14 | |
CON1 P27 | CSI-D5 | PE9 | |
CON1 P28 | CSI-VSYNC | PE3 | |
CON1 P29 | CSI-D6 | PE10 | |
CON1 P30 | CSI-HSYNC | PE2 | |
CON1 P31 | CSI-D7 | PE11 | |
CON1 P32 | CSI1-STBY-EN | PH18 | |
CON1 P33 | RESET\# | ||
CON1 P34 | CSI1-RESET\# | PH13 | |
CON1 P35 | CSI-IO0 | PH11 | |
CON1 P36 | HPR | ||
CON1 P37 | HPL | ||
CON1 P38 | IPSOUT | ||
CON1 P39 | GND | ||
CON1 P40 | IPSOUT |
LVDS \(LCD display interface\)
The LVDS Connector is a 40-pin FPC connector which can connect external LCD panel \(LVDS\) and touch screen \(I2C\) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as “CON2″.
LVDS GPIO of Banana pi BPI-M1 | |||
LVDS Pin | Pin Name | Multiplex Function Select | GPIO |
Multi 1 | Multi 2 | ||
CON2 P01 | IPSOUT\(5V output\) | ||
CON2 P02 | TWI3-SDA | PI1 | |
CON2 P03 | IPSOUT\(5V output\) | ||
CON2 P04 | TWI3-SCK | PI0 | |
CON2 P05 | GND | ||
CON2 P06 | LCD0-IO0 | PH7 | |
CON2 P07 | LCDIO-03 | PH12 | |
CON2 P08 | LCD0-IO1 | PH8 | |
CON2 P09 | LCD0-D0 | LVDS0-VP0 | PD0 |
CON2 P10 | PWM0 | PB2 | |
CON2 P11 | LCD0-D1 | LVDS0-VN0 | PD1 |
CON2 P12 | LCD0-IO2 | PH9 | |
CON2 P13 | LCD0-D2 | LVDS0-VP1 | PD2 |
CON2 P14 | LCD0-DE | PD25 | |
CON2 P15 | LCD0-D3 | LVDS0-VN1 | PD3 |
CON2 P16 | LCD0-VSYNC | ||
CON2 P17 | LCD0-D4 | LVDS0-VP2 | PD4 |
CON2 P18 | LCD0-HSYNC | ||
CON2 P19 | LCD0-D5 | LVDS0-VN2 | PD5 |
CON2 P20 | LCD0-CS | ||
CON2 P21 | LCD0-D6 | LVDS0-VPC | PD6 |
CON2 P22 | LCD0-CLK | PD24 | |
CON2 P23 | LCD0-D7 | LVDS0-VNC | PD7 |
CON2 P24 | GND | ||
CON2 P25 | LCD0-D8 | LVDS0-VP3 | PD8 |
CON2 P26 | LCD0-D23 | PD23 | |
CON2 P27 | LCD0-D9 | LVDS0-VN3 | PD9 |
CON2 P28 | LCD0-D22 | PD22 | |
CON2 P29 | LCD0-D10 | PD10 | |
CON2 P30 | LCD0-D21 | PD21 | |
CON2 P31 | LCD0-D11 | PD11 | |
CON2 P32 | LCD0-D20 | PD20 | |
CON2 P33 | LCD0-D12 | PD12 | |
CON2 P34 | LCD0-D19 | PD19 | |
CON2 P35 | LCD0-D13 | PD13 | |
CON2 P36 | LCD0-D18 | PD18 | |
CON2 P37 | LCD0-D14 | PD14 | |
CON2 P38 | LCD0-D17 | PD17 | |
CON2 P39 | LCD0-D15 | PD15 | |
CON2 P40 | LCD0-D16 | PD16 |
UART specification:
The jumper J11 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.
Jumper J11 of Banana pi BPI-M1 | |||
J11 Pin | Pin Name | Multiplex Function Select | GPIO |
Multi 1 | Multi 2 | ||
J11 Pin1 | TXD | UART0-TX | PB22 |
J11 Pin2 | RXD | UART0-RX | PB23 |
The jumper J12 provides the power source including 3.3V and 5V. There is a pair of UART TX/RX signals output here.
Jumper J12 of Banana pi BPI-M1 | |||
J12 Pin | Pin Name | Multiplex Function Select | GPIO |
Multi 1 | Multi 2 | ||
J12 Pin1 | 5V | ||
J12 Pin2 | 3.3V | ||
J12 Pin3 | NC | IO-7 | PH5 |
J12 Pin4 | RXD | UART7\_RX | PI21 |
J12 Pin5 | NC | IO-8 | PH3 |
J12 Pin6 | TXD | UART7\_TX | PI20 |
J12 Pin7 | GND | ||
J12 Pin8 | GND |
All GPIO define list:
Software
Development
Basic Development
Resources
Source code
- Linux kernel 3.4 Source code : https://github.com/BPI-SINOVOIP/BPI-M1-bsp
- Android 4.4 source code
- Android 4.2.2 source code
Documents
- BPI-M1 Gerber/Boom/Assembly document:
- Baidu cloud: https://pan.baidu.com/s/1bM8NR12Wp_dtp-m52nuKrA?pwd=8888 (pincode:8888)
- Google drive: https://drive.google.com/file/d/1Zx-1LHhGKJ8l-qakd4pVvTuBXsQYIgV8/view?usp=sharing
- Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the new link bpi-image Files
- All banana pi docement(SCH file,DXF file,and doc)
- schematic diagram:https://drive.google.com/drive/folders/0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM?resourcekey=0-ZRCiv304nGzvq-w7lwnpjg&usp=sharing
- BPI-M1 DXF file download link : google drive
- BPI-M1 3D design file download link :google drive
- CE FCC RoHS : BPI-M1 CE,FCC,RoHS
- Arch linux wiki for BPI-M1:https://wiki.archlinux.org/index.php/Banana_Pi
- Nas for BPI-M1/BPI-M1+ : https://www.hackster.io/jeffbaocai/bananapi-pro-nas-0815dc?ref=platform&ref_id=8064_popular___&offset=3
- NetBSD/evbarm on Allwinner SoCs : https://wiki.netbsd.org/ports/evbarm/allwinner/#index1h1
- Gentoo for banana pi : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way
- openSUSE for banana pi : https://en.opensuse.org/HCL:BananaPi
- How to booting from SSD using Lubuntu / Raspbian :https://bananapi.gitbooks.io/bpi-m1/content/en/howtobootingfromssdusinglubunturaspbian.html
- Building the cluster on BPI : https://www.hackster.io/Penguinfly/banana-pi-cluster-47d566
- Allwinner documents:
- allwinner chip online datasheet and documents: http://dl.linux-sunxi.org/
Image Release
Android 4.4
- 2018-07-28 update android 4.4 LCD version image
- Features Map:http://wiki.banana-pi.org/M1_Image_Map
- Baidu Drive:https://pan.baidu.com/s/1DfSIiMvW_I-kFjTZMtcVsA
- Google Drive: https://drive.google.com/open?id=1qcH9baIhOphsDdlH_yBADuBiZsvrSKnt
- Forum pthtread :http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-release-20180728/6357
- Release Date: 2018-07-26
- Baidu Drive: https://pan.baidu.com/s/1HErsANQ4PsnwQJ-tH0AdTg
- Google Drive:
Ubuntu Linux
- 2022-09-07 Armbian_22.11.0-trunk_Bananapi_jammy_edge_5.19.6_xfce_desktop.img
- Google Drive: https://drive.google.com/file/d/1WtPL8Hfr9aaE3VRnpgR_R7VYsc7O3Y9P/view?usp=sharing
- Baidu Cloud: https://pan.baidu.com/s/1fM-in68EK_ABvSJ7XiY0Ag?pwd=yft7 (pincode: yft7)
- Banana Pi new image: Ubuntu 16.04 with Allwinner BSP, use MPV play 1080P video,Allwinner BSP kernel 3.4 , BPI-M2 Ultra/Berry use kernel 3.10
- 2018-7-28 update :Ubuntu Server16.04 HDMI Version Image Link:
- Features Map:http://wiki.banana-pi.org/M1_Image_Map
- Baidu Drive: https://pan.baidu.com/s/1GYH8oDK3T_WcUFn-0t9YmQ
- Google Drive: https://drive.google.com/open?id=13XTvWe90yvRdqNWiKCLZ0HcMgo33y2r6
- Forum pthtread :http://forum.banana-pi.org/t/bananapi-m1-m1p-r1-new-image-release-20180728/6357
- Release Date: 2018-07-26
- Baidu Drive: https://pan.baidu.com/s/1Tw_99XBZVOmKyavNxCXv3w
- Google Drive:
Debian Linux
- 2022-09-07 Armbian_22.11.0-trunk_Bananapi_BPI-M1_bullseye_edge_5.19.6_xfce_desktop.img
- Google Drive:https://drive.google.com/file/d/1px0h0se8EiRuBiGGxT40hWpU3RWzPedK/view?usp=sharing
- Baidu Cloud: https://pan.baidu.com/s/1Vclux6Wb-ToJGOaGQxV6Hg?pwd=m4a3 (pincode: m4a3)
- 2019-9-18 update. Debian 10 buster mate desktop with grub support (boot-2019.07 + kernel 5.1.1)
Armbian image
- 2023-07 Armbian_23.02.0_Banana Pi BPI-M1
- Baidu Cloud: https://pan.baidu.com/s/1pPh0vomR3MZozm2iLqBAmA?pwd=8888 (pincode:8888)
- Google Drive:https://drive.google.com/drive/folders/1ig3DOF5V9MQ38Zlvx_1zoPh_-KNzLKKx?usp=sharing
- 2023-07 Armbian_23.08.0_Banana Pi BPI-M1
- Baidu Cloud: https://pan.baidu.com/s/1L3ZTQt_JOWRrAcA7bZakmA?pwd=8888 (pincode:8888)
- Google Drive: https://drive.google.com/drive/folders/1erfCb_sPspu3ilHW8yv4ooM66hJF7KLb?usp=sharing
- Armbian_23.02.0-trunk_Bananapi_jammy_current_5.15.93.img.xz
- Armbian_23.02.0-trunk_Bananapi_jammy_edge_6.1.11.img.xz
- Baidu Cloud: https://pan.baidu.com/s/1hkkl22uVjvRct1V7N4OK2w?pwd=8888
- Google Drive: https://drive.google.com/drive/folders/1VpvVkYMqgmSnmfKXQSrEY2B6wRa-cggL?usp=share_link
- Discuss on forum: https://forum.banana-pi.org/t/banana-pi-bpi-m1-new-armbian-image/15157
- 2022-12-06 Armbian_22.11.0-trunk_Bananapi BPI-M1_bullseye_edge_6.0.9.img.xz
- Google Drive:https://drive.google.com/file/d/1ZSFOd-nVFbAn_xB9AXckx9SEKQvnMB2J/view?usp=share_link
- Baidu Cloud:https://pan.baidu.com/s/12R8mIf7_45HDtruqEvktBw?pwd=8888 (pincode: 8888)
- Armbian Xenial and Armbian Jessie
- Image lownload link :https://www.armbian.com/bananapi/
OpenWRT
Official OpenWRT
- BPI-M1/BPI-M1+/BPI-R1 use A20 chip,so easy to run openwrt
- wiki : https://wiki.openwrt.org/toh/lamobo/r1
- openwrt support for allwinner :https://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi?s[]=banana&s[]=pi
- image download : https://downloads.openwrt.org/chaos_calmer/15.05/sunxi/generic/uboot-sunxi-Lamobo_R1/
- opwrt for Allwinner Soc : https://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi?s[]=banana&s[]=pi
BPI BSP for OpenWRT
- How to build OpenWRT image from github : https://bananapi.gitbooks.io/bpi-m1/content/en/howtobuildopenwrtimagefromgithub.html
FreeBSD
FreeBSD on Allwinner (sunxi) systems for banana pi
Banana pi as the official partner of Allwinner , must banana pi product use Allwinner chip design . such as A20/A31S/H3/H2+/A64/A83T , and FreeBSD have support many Allwinner . so easy to use on banana pi board.
- Allwinner A20 (sun7i), a dual-core Cortex-A7 BPI-M1/BPI-M1+/BPI-R1
- Allwinner A31 and A31s (sun6i), a quad-core Cortex-A7 BPI-M2
- Allwinner A64 (sun50i), a quad-core Cortex-A53 BPI-M64
- Allwinner A83T (sun8i), an octa-core Cortex-A7 BPI-M3
- Allwinner H3 (sun8i), a quad-core Cortex-A7 BPI-M2+/BPI-M2+ EDU/
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
OpenSuse
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/opensuse.html
OpenMediaVault
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/openmediavault.html
Arch Linux
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/arch_linux.html
Gentoo Linux
- Gentoo Linux have officeal support banana pi BPI-M1, so you also can use on BPI-M1+,and BPI-R1, all is base on allwinner A20 chip.
- gentoo linux wiki : https://wiki.gentoo.org/wiki/Banana_Pi_the_Gentoo_Way
RaspBSD
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/raspbsdonbpi-m1.html
CentOS
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/centos7linuxforbpi.html
DietPi
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/dietpi.html
FreeBSD/NetBSD
- inmage and how to : https://bananapi.gitbooks.io/bpi-m1/content/en/freebsdnetbsd.html
Lakka TV
- Banana Pi M2+ with H3 chip
- Banana Pi M3 with A83T chip
- BPI-M1 and BPI-M1+ use A20 chip
- more about this : https://bananapi.gitbooks.io/bpi-m3/content/en/lakkatv.html
http://mirror.lakka.tv/nightly/
Simplenas
- simplenas image : https://simplenas.com/download/other/banana-pi-m1
FAQ
Easy to buy
- SINOVOIP Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1100417230_40000003426518.html
- Bipai Aliexpress Shop: https://www.aliexpress.com/store/group/BPI-M1/1101951077_40000003418620.html
- Taobao Shop: https://shop108780008.taobao.com/category-1694930629.htm
- OEM&ODM, please contact: [email protected]