Difference between revisions of "Banana Pi BPI-R3"
(→SFP) |
(→WIFI6e) |
||
| (13 intermediate revisions by one other user not shown) | |||
| Line 16: | Line 16: | ||
==Introduction== | ==Introduction== | ||
Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) Quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard. It is a very high performance open source router development board,support Wi-Fi 6 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port | Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) Quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard. It is a very high performance open source router development board,support Wi-Fi 6 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port | ||
| + | |||
[[File:Banana_pi_751.jpg]] | [[File:Banana_pi_751.jpg]] | ||
| Line 43: | Line 44: | ||
* 8G eMMC flash | * 8G eMMC flash | ||
* 128MB SPI Nand | * 128MB SPI Nand | ||
| − | * | + | * 2x SFP 2.5GbE |
| − | * | + | * 5x GbE network port |
| − | |||
* Mini PCIe via USB | * Mini PCIe via USB | ||
| − | * M.2 KEY-M PCIe | + | * M.2 KEY-M PCIe interface |
* Mciro SD card interface | * Mciro SD card interface | ||
* 26 PIN GPIO | * 26 PIN GPIO | ||
| + | * POE function customizable (present version not support POE function) | ||
==Getting Start== | ==Getting Start== | ||
| Line 153: | Line 154: | ||
*BananaPi BPI-R3, now with ROOTer support!:https://wirelessjoint.com/viewtopic.php?t=3852 | *BananaPi BPI-R3, now with ROOTer support!:https://wirelessjoint.com/viewtopic.php?t=3852 | ||
*OpenWRT official for Sinovoip BananaPi BPi R3: https://openwrt.org/toh/sinovoip/bananapi_bpi-r3 | *OpenWRT official for Sinovoip BananaPi BPi R3: https://openwrt.org/toh/sinovoip/bananapi_bpi-r3 | ||
| + | *Setting up the Banana-R3 with OpenWRT:https://uglyscale.press/2023/09/13/setup-the-banana-r3-with-openwrt/ | ||
=Release image= | =Release image= | ||
| Line 218: | Line 220: | ||
[[File:R3-SFP-1000.png]] | [[File:R3-SFP-1000.png]] | ||
| + | |||
The SFPs we have tested that work are as follows: | The SFPs we have tested that work are as follows: | ||
| − | + | 1. 2.5G Copper: SFP-2.5G-T-R-RM | |
| − | 1. 2.5G Copper | + | |
| − | 2. 2.5G Optical Fiber : SFP-2.5G-BX0- | + | 2. 2.5G Optical Fiber: SFP-2.5G-BX0-U/SFP-2.5G-BX0-D |
| − | 3. TP-LINK 2.5G Copper | + | |
| − | 4. TP-LINK 2.5G Optical Fiber :TL-SM411LSA-500m/TL-SM411LSA-500m | + | 3. TP-LINK 2.5G Copper: TL-SM410U |
| + | |||
| + | 4. TP-LINK 2.5G Optical Fiber: TL-SM411LSA-500m/TL-SM411LSA-500m | ||
===WIFI6e=== | ===WIFI6e=== | ||
| Line 231: | Line 236: | ||
* ASIA.RF AW7916-NPD: | * ASIA.RF AW7916-NPD: | ||
:: Module:WiFi6E 3000 802.11ax G-band 2T2R and A-band 3T3R 2ss Dual Bands Dual Concurrents mPCIe Card AW7916-NPD(With BPI-M.2 to mPCIe Adapter) | :: Module:WiFi6E 3000 802.11ax G-band 2T2R and A-band 3T3R 2ss Dual Bands Dual Concurrents mPCIe Card AW7916-NPD(With BPI-M.2 to mPCIe Adapter) | ||
| − | :: WiFi6E Module:https:// | + | :: WiFi6E Module:https://asiarf.com/zh_cn/product/wi-fi-6e-mini-pcie-module-mt7916-aw7916-npd/ |
:: BPI-M.2 to mPCIe Adapter: | :: BPI-M.2 to mPCIe Adapter: | ||
::[[File:R3_m2-mPCIe-Adapter.png|500px]] | ::[[File:R3_m2-mPCIe-Adapter.png|500px]] | ||
| Line 240: | Line 245: | ||
===PoE=== | ===PoE=== | ||
| + | |||
| + | ===Easy to buy=== | ||
| + | *SINOVOIP Aliexpress Shop: https://www.aliexpress.us/item/3256804530142161.html? | ||
| + | *Bipai Aliexpress Shop: https://www.aliexpress.us/item/3256804530395673.html? | ||
| + | *Taobao Shop: https://shop108780008.taobao.com/category-1696287007.htm? | ||
| + | *OEM&ODM, please contact: [email protected] | ||
Revision as of 18:13, 21 February 2024
Summary
Banana Pi BPI-R3 with MediaTek MT7986(Filogic 830)
Banana Pi BPI-R3 with MediaTek MT7986(Filogic 830)
Banana Pi BPI-R3 Mini with MediaTek MT7986(Filogic 830)
Banana Pi BPI-R3 Mini with MediaTek MT7986(Filogic 830)
Banana Pi BPI-R3 with PoE function support
Banana Pi BPI-R2 Pro Rockchip RK3568 design
Banana Pi BPI-R64 with MediaTek MT7622
Banana Pi BPI-R2 with MTK MT7623N chip design
Banana Pi BPI-W2 with Realtek RTK1296 chip design
Banana Pi BPI-R1 with allwinner A20 chip design
Banana Pi BPI-R3 Metal case
Introduction
Banana Pi BPI-R3 Router board with MediaTek MT7986(Filogic 830) Quad core ARM A53 + MT7531A chip design ,2G DDR RAM ,8G eMMC flash onboard. It is a very high performance open source router development board,support Wi-Fi 6 2.4G wifi use MT7975N and 5G wifi use MT7975P, support 2 SFP 2.5GbE port, and 5 GbE network port
Introduction Video
MediaTek MT7986(Filogic 830)
The MT7986(Filogic 830) integrates four Arm Cortex-A53 cores up to 2GHz with up to 18,000 DMIPs of processing power and 6Gbps of dual 4x4 Wi-Fi6 connectivity. It has two 2.5g Ethernet interfaces and serial peripheral interfaces (SPI). Filogic 830‘s built-in hardware acceleration engine enables fast and reliable Wi-Fi offloading and wireless network connection. In addition, the chip supports Mediatek FastPath™ technology, which is suitable for games, AR/VR and other low-latency applications.
Wi-fi 6 has many advantages over its predecessors, including lower latency, larger bandwidth capacity and faster transmission rates. Wireless network devices supporting the 6GHz band mainly use 160MHz wide channel and 6GHz uncongested bandwidth to provide multigigabit transmission and low-latency wi-fi connection, providing reliable wireless network for streaming media, games, AR/VR and other applications.
Application direction
- Maker DIY
- Internet service Router
- Wireless Router
- Wireless Repeater
- Home security Gateway
- Home Automation
- Nas device
- Network and communication applications
Key Features
- MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design
- Wifi 6 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P)
- 2G DDR RAM
- 8G eMMC flash
- 128MB SPI Nand
- 2x SFP 2.5GbE
- 5x GbE network port
- Mini PCIe via USB
- M.2 KEY-M PCIe interface
- Mciro SD card interface
- 26 PIN GPIO
- POE function customizable (present version not support POE function)
Getting Start
Hardware
Hardware interface
Jumper setting
| Jumper Setting of Banana pi BPI-R3 | ||||
| Jumper Setting | SW1 | SW2 | SW5 | SW6 |
| SPIM-NoR | Low | Low | Low | X |
| SPIM-Nand | High | Low | High | X |
| eMMC | Low | High | High | Low |
| SD card | High | High | X | High |
Hardware spec
| HardWare Specification of Banana pi BPI-R3 | |||
| CPU | MediaTek MT7986(Filogic 830) Quad core ARM Cortex A53+MT7531 chip design | ||
| SDRAM | 2 GB DDR4 | ||
| On board Storage | MicroSD \(TF\) card,8GB eMMC onboard | ||
| GPIO | 26 Pin GPIO,some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S. | ||
| On board Network | 5 Port 10/100/1000Mbps Ethernet | ||
| SFP | 2 SFP 2.5GbE | ||
| Wifi | Wifi 6 4x4 2.4G Wifi(MT7975N) +4x4 5G Wifi(MT7975P) | ||
| mini PCIE | Mini PCIe via USB | ||
| M.2 interface | M.2 KEY-M PCIe inerface | ||
| USB | 1 USB 3.0 host ,2 USB interface with slot. | ||
| Buttons | Reset button,WPS botton, boot switch | ||
| Leds | Power status Led and RJ45 Led | ||
| DC Power | 12V/2A with DC in | ||
| Sizes | 100.5x148mm same as Banana Pi BPI-R64 and Banana Pi BPI-R2 | ||
| Weight | 200g | ||
Resources
Source code
- Official BPI-R3 kernel v5.15 + firmware repo:
- Official OpenWrt 21.02 for BPI-R3 repo:
Notes: Baidu link: https://pan.baidu.com/s/1JSQ7wJTCeK4JqWR_XB-LLQ?pwd=6vdb (Pincode: 6vdb) Google link:https://drive.google.com/file/d/13nQMfM0_XTyWcILhNxv_9E4TIvb65RI0/view?usp=sharing
- Frank’s U-Boot repo:
- Frank’s BPI-R3 kernel v6.1 repo
- Unofficial wiki (English):https://wiki.fw-web.de/doku.php?id=en:bpi-r3:start
Documents
- BPI-R3 DXF file : https://drive.google.com/file/d/1bc5mCtJlnPi84q7VZYaQkZhRUU4HUfUd/view?usp=sharing
- BPI-R3 schematic diagram
- Baidu Cloud: https://pan.baidu.com/s/1-GJNHAqNy7-JFTx22uoSfQ?pwd=8888 (pincode:8888)
- Google Drive: https://drive.google.com/file/d/1ED2z_e01Y0e6LDzMC_vLhCsTHEZTGwcg/view?usp=sharing
- MT7986A_Datasheet_1.15 : https://drive.google.com/file/d/1t_nuPTeoAcFb1dmEe4kJVlLWdHcAA6OB/view?usp=sharing
- MT7986A_Reference_Manual_for_BPI-R3 : https://drive.google.com/file/d/1biSJmxnIpNzQroYDg9mtPtSTAv4i0DFf/view?usp=sharing
- [Tutorial] Build, customize and use MediaTek open-source U-Boot and ATF : https://forum.banana-pi.org/t/tutorial-build-customize-and-use-mediatek-open-source-u-boot-and-atf/13785
- BPI-R3 OpenSource Routerboard how to burn and test imagehttps://www.youtube.com/watch?v=Xaf_SC7fPDM
- BPI-R3 CE,FCC,RoHS certificate : https://banana-pi.org/en/bpi-honor/
- Banana Pi BPI-R3 Review: Details, Pricing, & Features : https://androidpimp.com/embedded/banana-pi-bpi-r3-router-board/?fbclid=IwAR1G4cEco5iULwKG-C-n8MIiWOWZMhPborqmCzS2d3KIHx-eNQS-54lZnps
- Update OpenWrt to 22.03.3 SNAPSHOT:https://forum.banana-pi.org/t/bananapi-bpi-r3-update-openwrt-to-22-03-3-snapshot/14984
- 3D printed cases:https://forum.banana-pi.org/t/banana-bpi-r3-3d-printed-case/14246/43
- Cooling solutions topic: https://forum.banana-pi.org/t/bpi-r3-running-hot/14750
- Bananapi R3 review with WiFi / CPU benchmarks and power consumption numbers: https://wiki.junicast.de/en/junicast/review/bananapi-BPI-R3
- [BPI-R2/R64/R3] OpenWrt built on devices : https://openwrt.org/docs/guide-developer/toolchain/building_openwrt_on_openwrt
- [Tutorial] Reworking BPI-R3 nand Flash:https://forum.banana-pi.org/t/tutorial-reworking-bpi-r3-nand-flash/15492
- BananaPi BPI-R3, now with ROOTer support!:https://wirelessjoint.com/viewtopic.php?t=3852
- OpenWRT official for Sinovoip BananaPi BPi R3: https://openwrt.org/toh/sinovoip/bananapi_bpi-r3
- Setting up the Banana-R3 with OpenWRT:https://uglyscale.press/2023/09/13/setup-the-banana-r3-with-openwrt/
Release image
OpenWRT
- Latest official OpenWRT snapshot image:
- 2022-07-20 udptae BPI-R3 OpenWRT 21.02 linux kernel 5.4, wifi 6 2.4G and 5G mac80211 opensource wifi driver working fine support nand flash ,SD card ,eMMC flash boot. for BPI-R3 production version hardware
- Google Drive:https://drive.google.com/file/d/13nQMfM0_XTyWcILhNxv_9E4TIvb65RI0/view?usp=share_link
- Baidu Cloud: https://pan.baidu.com/s/1-5tqHEacMw1wlTSEK1ey9A?pwd=8888 (pincode: 8888)
- 2022-06-01udptae BPI-R3 OpenWRT 21.02 linux kernel 5.4, wifi 6 2.4G and 5G working fine support nand flash ,SD card ,eMMC flash boot. for BPI-R3 production version hardware
- Google drive :https://drive.google.com/file/d/18_xst-diDdCg7CeSum1M5FDbbo31jFJq/view?usp=drivesdk
- Baidu link: https://pan.baidu.com/s/1idqU1-bB4XD1LTGDAJxRGA?pwd=chez Pincode: chez
- Discuss on forum : https://forum.banana-pi.org/t/banana-pi-bpi-r3-openwrt-image/13236
- 2022-09-28 udptae BPI-R3 OpenWRT 21.02 linux kernel 5.4, wifi 6 2.4G and 5G working fine support nand flash ,SD card ,eMMC flash boot, support EC25 LTE 4G
Modules for BPI-R3 production version hardware
- Google drive: https://drive.google.com/file/d/1oNcnIl8bDla9pPWUd-TFPXXphsCMsJt0/view?usp=sharing
- Baidu link: https://pan.baidu.com/s/1v4sKfAuax3AfHNtp_2RP_g?pwd=mebq (Pincode: mebq)
Debian
- [BPI-R3] Debian Bullseye Image, this image is share by Frank:
- 2022-12-18-debian-11-bullseye-lite-bpi-r3-5.15-sd-emmc.img, Kernel 5.15.77
- Baidu Cloud: https://pan.baidu.com/s/195HeMXjK-rmCEZTnYBCndA?pwd=8888 (pincode: 8888)
- Google Drive:https://drive.google.com/file/d/1NRR1hKsv6vE1bHOyRjcCGiHgmgaRxt72/view?usp=share_link
- 2022-12-18-debian-10-buster-lite-bpi-r3-5.15-sd-emmc.img, Kernel 5.15.77
- Baidu Cloud: https://pan.baidu.com/s/1_OGb8ZMF4pWIbaKJ0z2JsA?pwd=8888 (pincode: 8888)
- Google Drive: https://drive.google.com/file/d/1Q9ZSCZ8_ZI6o5SG4_iOn-mQUaci6Qfrt/view?usp=share_link
Ubuntu
- 2022-12-18-ubuntu-22.04-server-bpi-r3-aarch64-sd-emmc.img
- Baidu Cloud: https://pan.baidu.com/s/1PajBEeFkgzgBdmJa5KpHpA?pwd=8888 (pincode: 8888)
- Google Drive:https://drive.google.com/file/d/1m9TFmnICj45b61evvmz9ja0g7kH641SG/view?usp=share_link
Frank’s image
- Frank’s Debian Bullseye image：
- Frank’s Ubuntu 22.04 image:
Arch linux
FAQ
Failed to save the configuration
- Enter "mtd erase /dev/mtd10"
Accessories
4G
- BPI-R3 can use Quectel EC25E minipcie-slot
SFP
Notice:
The SFP serdes of R3 are fixed 2.5Gbase-X, so only SFP that support this protocol can be used.
And there is no debugging insertion detection function, so there will be no prompt when inserting any SFP module.
The SFPs we have tested that work are as follows:
1. 2.5G Copper: SFP-2.5G-T-R-RM
2. 2.5G Optical Fiber: SFP-2.5G-BX0-U/SFP-2.5G-BX0-D
3. TP-LINK 2.5G Copper: TL-SM410U
4. TP-LINK 2.5G Optical Fiber: TL-SM411LSA-500m/TL-SM411LSA-500m
WIFI6e
- ASIA.RF AW7916-NPD:
- Module:WiFi6E 3000 802.11ax G-band 2T2R and A-band 3T3R 2ss Dual Bands Dual Concurrents mPCIe Card AW7916-NPD(With BPI-M.2 to mPCIe Adapter)
- WiFi6E Module:https://asiarf.com/zh_cn/product/wi-fi-6e-mini-pcie-module-mt7916-aw7916-npd/
- BPI-M.2 to mPCIe Adapter:
-
- Test Items:
- As Client:
-
PoE
Easy to buy
- SINOVOIP Aliexpress Shop: https://www.aliexpress.us/item/3256804530142161.html?
- Bipai Aliexpress Shop: https://www.aliexpress.us/item/3256804530395673.html?
- Taobao Shop: https://shop108780008.taobao.com/category-1696287007.htm?
- OEM&ODM, please contact: [email protected]
