Revision as of 18:11, 7 October 2023

Introduction

 * Prepare 8G/above TF card, USB-Serial cable, Ubuntu System
 * Using your USB-Serial cable Connect to debug console on BPI-R4

 * BPI-R4 bootstrap and device select Jumper Setting

  * Examples:

 All Jumper is "1", BPI-R4 will boot from SD card

 SW3-A is "0" and SW3-B is "1" , BPI-R4 will boot from SPI NAND

 SW3-A is "1" and SW3-B is "0" , BPI-R4 will boot from eMMC

Note: Do not pull out the module once it is inserted, otherwise it will cause BPI-R4 to reboot.

Revision as of 18:09, 7 October 2023 (view source) Sinovoip (talk \| contribs) (→‎Accessories) ← Older edit		Revision as of 18:11, 7 October 2023 (view source) Sinovoip (talk \| contribs) (→‎Accessories) Newer edit →
Line 58:		Line 58:

	===5. Asia mPCIe WiFi6/WiFi6E===		===5. Asia mPCIe WiFi6/WiFi6E===
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+
		+	A