Difference between revisions of "Getting Started with BPI-R4"

From Banana Pi Wiki
Jump to: navigation, search
(→‎1.10G SFP+ Copper)
(→‎Accessories)
Line 54: Line 54:
  
  
−
4. SSD
+
===4. SSD===
  
  
−
5. Asia mPCIe WiFi6/WiFi6E
+
===5. Asia mPCIe WiFi6/WiFi6E===

Revision as of 18:09, 7 October 2023

Introduction

MediaTek MT7986(Filogic 830)

Key Features

Development

Basic Development

Prepare to develop

 * Prepare 8G/above TF card, USB-Serial cable, Ubuntu System
 * Using your USB-Serial cable Connect to debug console on BPI-R4
    R4 DebugPort.png

 * BPI-R4 bootstrap and device select Jumper Setting
    R4-bootstrip.png



  * Examples:

 All Jumper is "1", BPI-R4 will boot from SD card
    R4 SDBOOT.png



 SW3-A is "0" and SW3-B is "1" , BPI-R4 will boot from SPI NAND
    R4 NANDBOOT.png



 SW3-A is "1" and SW3-B is "0" , BPI-R4 will boot from eMMC
    R4 eMMCBOOT.png


Accessories

1.10G SFP+ Copper

SFP-10G-T-AQR.png

BPI-R4 SFP-10G-T(AQR113C).png


Note: Do not pull out the module once it is inserted, otherwise it will cause BPI-R4 to reboot.

BPI-R4 SFP-10G-T(AQR113C)-Pull out reboot.png

2. 10G SFP+ Fibre

SFP-10G-BX20.png

BPI-R4 SFP-10G-BX20.png

3.4G/5G Module

4. SSD

5. Asia mPCIe WiFi6/WiFi6E

Retrieved from "https://wiki.banana-pi.org/index.php?title=Getting_Started_with_BPI-R4&oldid=16096"