Difference between revisions of "Getting Started with BPI-R4"
(→Prepare to develop) |
(→Prepare to develop) |
||
| Line 14: | Line 14: | ||
* Using your USB-Serial cable Connect to debug console on BPI-R4 | * Using your USB-Serial cable Connect to debug console on BPI-R4 | ||
| − | + | [[File:R4 DebugPort.png|320px]] | |
* BPI-R4 bootstrap and device select Jumper Setting | * BPI-R4 bootstrap and device select Jumper Setting | ||
Revision as of 17:52, 7 October 2023
Contents
Introduction
MediaTek MT7986(Filogic 830)
Key Features
Development
Basic Development
Prepare to develop
* Prepare 8G/above TF card, USB-Serial cable, Ubuntu System * Using your USB-Serial cable Connect to debug console on BPI-R4
* BPI-R4 bootstrap and device select Jumper Setting
* Examples:
All Jumper is "1", BPI-R4 will boot from SD card
SW3-A is "0" and SW3-B is "1" , BPI-R4 will boot from SPI NAND
SW3-A is "1" and SW3-B is "0" , BPI-R4 will boot from eMMC
