Revision as of 02:56, 14 May 2018

Introduction

Banana Pi M2+ is mini size development board that offers great computing performance in an ultra portable form factor.It is a 65mm*65mm fantastic mini size board with Allwinner H series chips. It comes with different versions but share the same interfaces.

BPI-M2+ H3

Key Features

Quad-core 1.2GHz Cortex-A7 H3
1GB DDR3
8GB eMMC onboard
WiFi and BlueTooth onboard
10/100/1000Mbps Ethernet Port

Development

Let's get start to develop on BPI-M2P, see amazing things happen.

Basic Development

Prepare to develop

 1.Prepare 16G/above TF card, USB-Serial interface, PC with Ubuntu System

 2.Using your USB-Serial Connect debug console on M2P

Load your first image on M2P

Build your own image on M2P

Ubuntu

Armbian

Advanced Development

GPIO

Bluetooth

WiFi and Ap mode on M2P

WiFi Client

AP mode

Clear boot

git clone https://github.com/BPI-SINOVOIP/BPI-files/tree/master/SD/100MB
bpi-bootsel BPI-cleanboot-8k.img.gz /dev/sdX

Camara function

Guvcview

IR function

WringPi

GitHub: https://github.com/JackZengBpi/BPI-WiringPi2

RGB 1602 LCD

0.96 Inch OLED Display

8x8 RGB LED Martix

FAQ

Reference Link

http://www.banana-pi.org/m2plus.html

http://forum.banana-pi.org/

@@ Line 52: / Line 52: @@
 ===WringPi===
+* GitHub: https://github.com/JackZengBpi/BPI-WiringPi2
+* RGB 1602 LCD
+[[Image: WringPi_1602_LCD.png]]
+* 0.96 Inch OLED Display
+[[Image: WringPi_0.96_OLED.png]]
+* 8x8 RGB LED Martix
+[[Image: WringPi_LED_Martix.png]]
 ==FAQ==

Difference between revisions of "Getting Started with M2P"

Revision as of 02:56, 14 May 2018

Contents