Difference between revisions of "Getting Started with M2P"
JackZengWiki (talk | contribs) (→Advanced Development) |
JackZengWiki (talk | contribs) (→Advanced Development) |
||
| Line 41: | Line 41: | ||
====AP mode==== | ====AP mode==== | ||
| + | |||
| + | ===Clear boot=== | ||
| + | * git clone https://github.com/BPI-SINOVOIP/BPI-files/tree/master/SD/100MB | ||
| + | * bpi-bootsel BPI-cleanboot-8k.img.gz /dev/sdX | ||
===Camara function=== | ===Camara function=== | ||
Revision as of 18:01, 13 May 2018
Contents
Introduction
Banana Pi M2+ is mini size development board that offers great computing performance in an ultra portable form factor.It is a 65mm*65mm fantastic mini size board with Allwinner H series chips. It comes with different versions but share the same interfaces.
Read more: Banana Pi BPI-M2+
BPI-M2+ H3
Key Features
- Quad-core 1.2GHz Cortex-A7 H3
- 1GB DDR3
- 8GB eMMC onboard
- WiFi and BlueTooth onboard
- 10/100/1000Mbps Ethernet Port
Development
Let's get start to develop on BPI-M2P, see amazing things happen.
Basic Development
Prepare to develop
1.Prepare 16G/above TF card, USB-Serial interface, PC with Ubuntu System
2.Using your USB-Serial Connect debug console on M2P
Load your first image on M2P
Build your own image on M2P
Ubuntu
Armbian
Advanced Development
GPIO
Bluetooth
WiFi and Ap mode on M2P
WiFi Client
AP mode
Clear boot
- git clone https://github.com/BPI-SINOVOIP/BPI-files/tree/master/SD/100MB
- bpi-bootsel BPI-cleanboot-8k.img.gz /dev/sdX
