Difference between revisions of "Banana Pi Series Comparison"
Line 7: | Line 7: | ||
|photo|||||||||||||||||| | |photo|||||||||||||||||| | ||
|- | |- | ||
− | |CPU || H2+ Quad-core Cortex-A7 H265/HEVC 1080P | + | |CPU || H2+ Quad-core Cortex-A7 H265/HEVC 1080P |||||||||||||||||| |
|- | |- | ||
|GPU || Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0 | |GPU || Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0 |
Revision as of 19:21, 11 May 2018
Banana Pi Single board computer Comparison | ||||||||||
module | BPI-M1 | BPI-M1+ | BPI-M2+ | BPI-M2 Magic | BPI-M2 Berry | BPI-M2 Ulra | BPI-M3 | BPI-M64 | BPI-M3 | |
photo | ||||||||||
CPU | H2+ Quad-core Cortex-A7 H265/HEVC 1080P | |||||||||
GPU | Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0 | |||||||||
Memory \(SDRAM\) | 512M \(shared with GPU\) | |||||||||
Onboard Storage | TF card \(Max. 64GB\) | |||||||||
Onboard Network | NOPE | |||||||||
Onboard WIFI | SDIO AP6212(option AP6181、AP6335) | |||||||||
Video Input | A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL,3 Supports SM pixel camera sensor ,4 Supports video capture solution up to 1080p@30fps | |||||||||
Video Outputs | Supports Mini HDMI Port | |||||||||
Audio Output | Mini HDMI | |||||||||
Power Source | Micro USB with 5V/2A | |||||||||
USB 2.0 Ports | one USB 2.0 OTG | |||||||||
Buttons | Power Button, Reset Button | |||||||||
Low-level peripherals | 40 Pins Header,compatible with Raspberry Pi 3 | |||||||||
uart GPIO\(1x3\) pin | UART, ground | |||||||||
LED | Power led & Status led | |||||||||
IR | nope | |||||||||
Supported OS | Android, Ubuntu, Debian, Rasberry Pi Image | |||||||||
Product size | 65mm × 30mm | |||||||||
Weight | 35g |