Difference between revisions of "Banana Pi BPI-F2S"

From Banana Pi Wiki
Jump to: navigation, search
(→‎Resources)
 
(32 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[zh:香蕉派 BPI-F2S]]
 +
 
=Introduction=
 
=Introduction=
  
 
[[File:Banana_Pi_BPI-F2S_1_.JPG|thumb| [[Banana Pi BPI-F2S]]]]
 
[[File:Banana_Pi_BPI-F2S_1_.JPG|thumb| [[Banana Pi BPI-F2S]]]]
−
[[File:Banana_Pi_BPI-F2S_2.JPG.JPG|thumb| sunplus SF7021 chip design]]
+
[[File:Xilinx_Artix-7_FPGA_1.JPG|thumb| Xilinx Artix-7 XC7A100T FPGA board]]
−
[[File:Banana_PI_BPI-F2S_5.JPG|thumb| Industrial operating]]
+
[[File:Banana_Pi_BPI-F2S_2.JPG|thumb| sunplus SF7021 chip design]]
 +
[[File:Banana_PI_BPI-F2P_3.JPG|thumb| [[Banana Pi BPI-F2P]]]]
 +
[[File:Xilinx_Artix-7_FPGA_2.JPG|thumb| Xilinx Artix-7 XC7A100T FPGA board]]
 +
[[File:Banana_Pi_BPI-F2S_7.JPG|thumb| Industrial operating]]
 
[[File:SP7021diagram_.png|thumb|SunPlus SP7021 Diagram]]
 
[[File:SP7021diagram_.png|thumb|SunPlus SP7021 Diagram]]
 +
[[File:Sunpuls_sp7021.jpg|thumb|SunPlus SP7021]]
  
−
Banana Pi BPI-F2S is the first board with '''Banana Pi team''' and [https://www.sunplus.com/ '''SunPlus'''], this is a industrial-grade board. use Plus1(sp7021) design.
+
Banana Pi BPI-F2S is the first board with '''Banana Pi team''' and [https://www.sunplus.com/ '''SunPlus'''], this is a industrial-grade board. use Plus1(sp7021) design. this is a industrial-grade board. we also design a Xilinx Artix-7 FPGA extend board.  
  
 
==Application direction==
 
==Application direction==
Line 46: Line 52:
  
 
==Hardware spec==
 
==Hardware spec==
 +
*SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM.
 +
*Storage – 8GB eMMC flash, microSD card slot
 +
*Video Output – HDMI 1.4 output
 +
*Camera I/F – MIPI CSI connector
 +
*Connectivity – 2x 10/100M Ethernet
 +
*USB – 2x USB 2.0 host ports, 1x micro USB port
 +
*Expansion
 +
::40-pin GPIO header compatible with Raspberry Pi header
 +
::2x 50-pin FPGA interface for Trenz Electronic TE0725LP-01-100-2D  Artix 7 FPGA board
 +
::Unpopulated, undocumented 50-pin header that’s appears to be routed to one of the headers for the optional FPGA board
 +
*Debugging – 3-pin header for UART console, 10-pin JTAG header, SWD ICE port
 +
*Security – TPM 2.0 via ST33TPH2EI2C secure element
 +
*Misc – Power switch, reset button, boot selection dip switch
 +
*Power Supply – 12VDC via power barrel jack
 +
*Dimensions –135x80mm
 +
*Temperature Range – -40C ~ +85°C
  
 
=SOC education and training practice suite=
 
=SOC education and training practice suite=
Line 51: Line 73:
 
SunPlus SP7021 development suite is a set of development platform with high integration of single chip based on sunplus 7021 SOC.With high performance, low Characteristics of power consumption;Embedded Linux Embed system, suitable for voice image processing, communication, portable industrial control equipment and other applications.With high performance processor, especially suitable for AI artificial intelligence, machine vision and other applications requiring strong computing power;Expandable FPGA module, can Layout, small board area, easy to field test application
 
SunPlus SP7021 development suite is a set of development platform with high integration of single chip based on sunplus 7021 SOC.With high performance, low Characteristics of power consumption;Embedded Linux Embed system, suitable for voice image processing, communication, portable industrial control equipment and other applications.With high performance processor, especially suitable for AI artificial intelligence, machine vision and other applications requiring strong computing power;Expandable FPGA module, can Layout, small board area, easy to field test application
  
−
[[File:Banana_Pi_FPGA_kit.JPG]]
+
[[File:BPI-F2S_with_FPGA_4.jpg]]
  
 
==Kit include==
 
==Kit include==
Line 61: Line 83:
 
*5. 12v/2A adapter
 
*5. 12v/2A adapter
  
−
online documents：
+
==FPGA kit documents==
 +
 
 +
online development doc: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/pages/470777857/SP7021+Plus+Xilinx+FPGA+SOC+Platform+UserGuide
 +
 
 +
Sunplus official website for BPI-F2S FPGA development Kit:http://www.cqplus1.com/zlxz
  
−
https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/pages/470777857/SP7021+Plus+Xilinx+FPGA+SOC+Platform+UserGuide
+
function demo : https://www.youtube.com/watch?v=602gQo_Qcrs
  
 
==Xilinx Artix-7 FPGA extend board==
 
==Xilinx Artix-7 FPGA extend board==
 +
 +
[[File:Xilinx_Artix-7_FPGA_9.JPG]]
  
 
FPGA Module with Xilinx Artix-7 100T (Variant 2D), 2 x 50 Pin, 1.8V only supply
 
FPGA Module with Xilinx Artix-7 100T (Variant 2D), 2 x 50 Pin, 1.8V only supply
Line 76: Line 104:
 
Key Features:
 
Key Features:
  
−
*Xilinx Artix-7 XC7A100T-2CSG324C
+
*Xilinx Artix-7 XC7A100T-2CSG324C/XC7A100T-2CSG324I
 
*Commercial temperature grade (industrial on request)
 
*Commercial temperature grade (industrial on request)
 
*32 MByte Flash memory
 
*32 MByte Flash memory
Line 94: Line 122:
  
 
==Source code on github==
 
==Source code on github==
−
* BPI-F2S BPS code with kernel 4.19 :　https://github.com/BPI-SINOVOIP/BPI-F2S-bsp
+
* Sunpuls github for Linux kernel 4.19 and 5.4 source code: https://github.com/sunplus-plus1
 +
* BPI-F2S BPS code with kernel 5.4.35 :　https://github.com/BPI-SINOVOIP/BPI-F2S-bsp
 +
 
 +
=Resources=
 +
*Because of the Google security update some of the old links will not work if the images you want to use cannot be downloaded from the [https://drive.google.com/drive/folders/0B_YnvHgh2rwjVjNyS2pheEtWQlk?resourcekey=0-U4TI84zIBdId7bHHjf2qKA new link bpi-image Files]
 +
*All banana pi [https://drive.google.com/drive/folders/0B4PAo2nW2Kfndjh6SW9MS2xKSWs?resourcekey=0-qXGFXKmd7AVy0S81OXM1RA&usp=sharing  docement(SCH file,DXF file,and doc)]
 +
*Banana Pi BPI-F2S schematic diagram:[https://drive.google.com/drive/folders/0B4PAo2nW2KfnflVqbjJGTFlFTTd1b1o1OUxDNk5ackVDM0RNUjBpZ0FQU19SbDk1MngzZWM?resourcekey=0-ZRCiv304nGzvq-w7lwnpjg&usp=sharing  google driver]
 +
*BPI-F2S DXF file : https://drive.google.com/file/d/1HMPTBYWvK_kk6KkvVHY3KDnwYe_noMZW/view?usp=sharing
 +
*Sunpulus wiki page documents(english):https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
 +
*PLUS1 SP7021 Datasheet : https://drive.google.com/file/d/1MWFwgHMteMKVxgzyK5ClU9LOyh-M8xPA/view?usp=sharing
 +
*SP7021 Released Document :https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
 +
*Banana Pi BPI-F2P Sunplus SP7021 industrial control board PoE function test:https://www.youtube.com/watch?v=YQ5rVYHLHQI
 +
*[https://www.youtube.com/watch?v=eoSP7cO2ki4&feature=youtu.be Banana Pi BPI-F2S setup & run fedora 31 (u-boot-2019.04 + kernel 4.19.37)]
  
 
=Image=
 
=Image=
 +
==Ubuntu Linux==
 +
* 2019-12-25 update :ubuntu mate 18.04 desktop 2019-12-25 base on kernel 4.19.37
 +
::file name : 2019-12-25-ubuntu-mate-18.04.2-beta1-desktop-armhf+raspi-ext4-bpi-f2s.img.zip
 +
::google link:https://drive.google.com/file/d/1_TJzJPMm89Fb9Fji1PddMPas-EEO-IGw/view
 +
::discuss on forum:http://forum.banana-pi.org/t/bpi-f2s-new-image-ubuntu-mate-18-04-desktop-2019-12-25/10454
 +
 +
==Kail Linux==
 +
* 2019-12-25 update:Kail Linux 2019.4 nexmon 2019-12-25 base on kernel 4.19.37
 +
::file name:2019-12-25-kali-linux-2019.4-rpi3-nexmon-bpi-f2s.img.zip
 +
::google link:https://drive.google.com/file/d/19G49t288CKKLGokI-jQOs9h7rtsxGBGo/view?usp=drivesdk
 +
::password: root/toor
 +
::discuss on forum:http://forum.banana-pi.org/t/bpi-f2s-new-image-kail-linux-2019-4-nexmon-2019-12-25/10453
 +
 +
==Debian Linux==
 +
*debian-10-buste-bpi-f2s-sd-emmc 2019-11-26 kernel 4.19
 +
::file name: 2019-11-29-debian-10-buster-mate-desktop-beta-bpi-f2s-sd-emmc.img.zip
 +
::google download link: https://drive.google.com/file/d/1MpjDeUk4H-EXzaxpuywgbgRaM8YXoXjI/view
 +
::Discuss on forum: http://forum.banana-pi.org/t/bpi-f2s-new-image-debian-10-buste-bpi-f2s-sd-emmc-2019-11-26/10270
 +
 +
==CentOS linux==
 +
*CentOS userland armv7hl-RaspberryPi KDE 1908 sda 2019-12-25 base on kernel 4.19.37
 +
::file name:2019-12-25-CentOS-Userland-7-armv7hl-RaspberryPI-KDE-1908-sda.raw.xz-bpi-f2s.img.zip
 +
::google link：https://drive.google.com/file/d/1Is-BS7lvCUrRBkO7wCjn4q51eI7Yof-l/view
 +
::password:root/centos
 +
::discuss on forum:http://forum.banana-pi.org/t/bpi-f2s-new-image-centos-userland-armv7hl-raspberrypi-kde-1908-sda-2019-12-25/10452
  
 
==Fedora-Mate==
 
==Fedora-Mate==
Line 105: Line 170:
 
::boot logfile: https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/2019-11-14-Fedora-Mate-armhfp-31-1.9-sda.raw.xz-bpi-f2s-sd-emmc.img.txt
 
::boot logfile: https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/2019-11-14-Fedora-Mate-armhfp-31-1.9-sda.raw.xz-bpi-f2s-sd-emmc.img.txt
 
::readme:https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/readme.txt
 
::readme:https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/readme.txt
 +
 +
==Mozilla IoT gateway==
 +
*Mozilla IoT rpi gateway 0.10.0 2019-12-25 base on kernel 4.19.37
 +
::file name:2019-12-25-rpi-gateway-0.10.0-bpi-f2s.img.zip
 +
::google link:https://drive.google.com/file/d/1wPDeqQpKce-I81fQ638HE_ogl-MDkOOB/view?usp=drivesdk
 +
::Mozilla gateway getting started guide:https://iot.mozilla.org/docs/gateway-getting-started-guide.html
 +
::discuss on forum :http://forum.banana-pi.org/t/bpi-f2s-new-image-mozilla-iot-rpi-gateway-0-10-0-2019-12-25/10455
 +
 +
 +
==Yocto Linux ==
 +
 +
*this code is support by Tibbo/SunPlus
 +
::github link: https://github.com/tibbotech/yocto_layers
  
 
=Resources=
 
=Resources=
Line 116: Line 194:
  
 
=Easy to buy sample=
 
=Easy to buy sample=
−
*Aliexpress online shop: https://www.aliexpress.com/item/4000516679477.html
+
*Aliexpress online shop: https://pt.aliexpress.com/store/group/Banana-PI-F2S-Board/302756_517091763.html?spm=a2g03.12010612.0.0.6124277eh17sp6
 
*Taobao shop ：  https://item.taobao.com/item.htm?ft=t&id=610642319814
 
*Taobao shop ：  https://item.taobao.com/item.htm?ft=t&id=610642319814

Latest revision as of 03:28, 4 November 2021


Introduction

Banana Pi BPI-F2S
Xilinx Artix-7 XC7A100T FPGA board
sunplus SF7021 chip design
Banana Pi BPI-F2P
Xilinx Artix-7 XC7A100T FPGA board
Industrial operating
SunPlus SP7021 Diagram
SunPlus SP7021

Banana Pi BPI-F2S is the first board with Banana Pi team and SunPlus, this is a industrial-grade board. use Plus1(sp7021) design. this is a industrial-grade board. we also design a Xilinx Artix-7 FPGA extend board.

Application direction

  • IoT/Industrial Internet control
  • Smart Audio
  • Smart Payment system
  • FPGA education and development
  • Vehicular networking technology and applications

about SunPlus SP7021

SunPlus sp7021 is a revolutionary SoC that has the power of a Linux-grade chip and the integration simplicity of a microcontroller.it with ARM Cortex-A7 Quad core,ARM926 real-time core,8051 low-power core

Conceived by Sunplus Technology in collaboration with Tibbo Technology, PLUS1 takes all the sophisticated elements typically found in modern industrial-grade embedded Linux chips, adds a plethora of features targeting IoT and industrial control applications, and delivers the resulting design in a simple microcontroller-like package that needs few external components, simplifies the schematic diagram, and reduces the PCB complexity.

SP7021 is a SoC solution of industrial control. It meets customers’full demand on function but with low cost so that will improve customers’ competitiveness in the market. SP7021 provides rich GPIOs, storage and USB interface. And it provides MIPI CSI interface for video input and HDMI interface for video output. It also provides FPGA interface for function extension. SP7021 also has 4 Ethernet ports providing customers a high competitive solution.

characteristics of the SP7021

  • Easy-to-use LQFP package.
  • Quad-core 1GHz Cortex-A7 CPU, plus A926 and 8051 cores.
  • Single 3.3V power*.
  • Integrated 128MB or 512MB DDR3 DRAM.
  • Eight 8-bit 5V-tolerant IO ports, plus one high-current port.
  • Flexible Peripheral Multiplexing (PinMux).
  • Dual PinMuxable Ethernet MACs.
  • Four PinMuxable Enhanced UARTs, plus one console UART.
  • Industrial operating temperature range: -40C ~ +85C.
  • Low EMI simplifies certification.
  • Modern, Yocto-based Linux distribution.
  • 10-year supply guarantee.
  • Robust ready-to-run modern Linux distribution available
  • And much more...

Hardware

Hardware interface

Banana PI BPI-F2S 6.JPG

note : 40 PIN GPIO compitable Raspberry Pi

Hardware spec

  • SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM.
  • Storage – 8GB eMMC flash, microSD card slot
  • Video Output – HDMI 1.4 output
  • Camera I/F – MIPI CSI connector
  • Connectivity – 2x 10/100M Ethernet
  • USB – 2x USB 2.0 host ports, 1x micro USB port
  • Expansion
40-pin GPIO header compatible with Raspberry Pi header
2x 50-pin FPGA interface for Trenz Electronic TE0725LP-01-100-2D Artix 7 FPGA board
Unpopulated, undocumented 50-pin header that’s appears to be routed to one of the headers for the optional FPGA board
  • Debugging – 3-pin header for UART console, 10-pin JTAG header, SWD ICE port
  • Security – TPM 2.0 via ST33TPH2EI2C secure element
  • Misc – Power switch, reset button, boot selection dip switch
  • Power Supply – 12VDC via power barrel jack
  • Dimensions –135x80mm
  • Temperature Range – -40C ~ +85°C

SOC education and training practice suite

SunPlus SP7021 development suite is a set of development platform with high integration of single chip based on sunplus 7021 SOC.With high performance, low Characteristics of power consumption;Embedded Linux Embed system, suitable for voice image processing, communication, portable industrial control equipment and other applications.With high performance processor, especially suitable for AI artificial intelligence, machine vision and other applications requiring strong computing power;Expandable FPGA module, can Layout, small board area, easy to field test application

BPI-F2S with FPGA 4.jpg

Kit include

  • 1. BPI-F2S sunplus board
  • 2. FPGA baord: Xilinx Artix-7 XC7A100T,32 MByte QSPI Flash memory,power by single 3.3v
  • 3. teaching sheet board : 4 digit 7 segment digital tube teaching,DIP8 socket for SPI flash IP authentication,8 LED lights are used for teaching
  • 4. debug tooling
  • 5. 12v/2A adapter

FPGA kit documents

online development doc: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/pages/470777857/SP7021+Plus+Xilinx+FPGA+SOC+Platform+UserGuide

Sunplus official website for BPI-F2S FPGA development Kit:http://www.cqplus1.com/zlxz

function demo : https://www.youtube.com/watch?v=602gQo_Qcrs

Xilinx Artix-7 FPGA extend board

Xilinx Artix-7 FPGA 9.JPG

FPGA Module with Xilinx Artix-7 100T (Variant 2D), 2 x 50 Pin, 1.8V only supply

Now with the Trenz Electronic TE0725LP-01-100-2D is a low cost small-sized FPGA module integrating a Xilinx Artix-7 (15T-100T) and 32 MByte Flash memory for configuration and operation. The 2 x 50 pin headers with a 2.54 mm standard pitch are perfect for breadboard or low cost dual layer PCB.

Trenz HyperBus enabled reference designs are typically bundled with a FREE evaluation edition of the commercially proven, low-cost, low-circuit area, high performance, HyperBus Memory Controller (HBMC) IP supplied by Synaptic Laboratories Ltd. Synaptic Labs HBMC IP is commercially proven in both Intel and Xilinx projects, and was selected by Intel. This FREE HBMC IP evaluation license never expires, and no customer registration or NIC ID is required. You can check for and obtain the latest version of the FREE evaluation HBMC IP from S/Labs website for Xilinx and Intel.

Key Features:

  • Xilinx Artix-7 XC7A100T-2CSG324C/XC7A100T-2CSG324I
  • Commercial temperature grade (industrial on request)
  • 32 MByte Flash memory
  • 2 x 50 pin headers with 2.54 mm pitch, ideal for breadboard use
  • 1.8 V single supply with on board voltage regulators
  • 95 I/O's (42 + 42 + 3 + 8)
  • 25 MHz system clock (100 MHz can be customized on request)
  • I2C EEPROM
  • 7.3 x 3.5 cm form factor
  • JTAG/UART connector
  • One user LED
  • optional HyperRAM (8 bis 32 MByte) or HyperFlash
  • HyperRAM from Cypress :http://www.cypress.com/products/hyperram-memory
  • HyperFlash from Cypress http://www.cypress.com/products/hyperflash-nor-flash-memory

Software

Source code on github

Resources

Image

Ubuntu Linux

  • 2019-12-25 update :ubuntu mate 18.04 desktop 2019-12-25 base on kernel 4.19.37
file name : 2019-12-25-ubuntu-mate-18.04.2-beta1-desktop-armhf+raspi-ext4-bpi-f2s.img.zip
google link:https://drive.google.com/file/d/1_TJzJPMm89Fb9Fji1PddMPas-EEO-IGw/view
discuss on forum:http://forum.banana-pi.org/t/bpi-f2s-new-image-ubuntu-mate-18-04-desktop-2019-12-25/10454

Kail Linux

  • 2019-12-25 update:Kail Linux 2019.4 nexmon 2019-12-25 base on kernel 4.19.37
file name:2019-12-25-kali-linux-2019.4-rpi3-nexmon-bpi-f2s.img.zip
google link:https://drive.google.com/file/d/19G49t288CKKLGokI-jQOs9h7rtsxGBGo/view?usp=drivesdk
password: root/toor
discuss on forum:http://forum.banana-pi.org/t/bpi-f2s-new-image-kail-linux-2019-4-nexmon-2019-12-25/10453

Debian Linux

  • debian-10-buste-bpi-f2s-sd-emmc 2019-11-26 kernel 4.19
file name: 2019-11-29-debian-10-buster-mate-desktop-beta-bpi-f2s-sd-emmc.img.zip
google download link: https://drive.google.com/file/d/1MpjDeUk4H-EXzaxpuywgbgRaM8YXoXjI/view
Discuss on forum: http://forum.banana-pi.org/t/bpi-f2s-new-image-debian-10-buste-bpi-f2s-sd-emmc-2019-11-26/10270

CentOS linux

  • CentOS userland armv7hl-RaspberryPi KDE 1908 sda 2019-12-25 base on kernel 4.19.37
file name:2019-12-25-CentOS-Userland-7-armv7hl-RaspberryPI-KDE-1908-sda.raw.xz-bpi-f2s.img.zip
google link：https://drive.google.com/file/d/1Is-BS7lvCUrRBkO7wCjn4q51eI7Yof-l/view
password:root/centos
discuss on forum:http://forum.banana-pi.org/t/bpi-f2s-new-image-centos-userland-armv7hl-raspberrypi-kde-1908-sda-2019-12-25/10452

Fedora-Mate

  • Banana Pi BPI-F2S setup & run fedora 31 (u-boot-2019.04 + kernel 4.19.37)
file name: 2019-11-14-Fedora-Mate-armhfp-31-1.9-sda.raw.xz-bpi-f2s-sd-emmc.img.zip
google download : https://drive.google.com/open?id=1ATHmvKvYoBpM3uyQ2xK4pvKahlgCGHnq
discuss on forum: http://forum.banana-pi.org/t/bpi-f2s-new-image-fedora-mate-armhfp-31-1-9-sda-raw-xz-bpi-f2s-sd-emmc-img-2019-11-15/10206
boot logfile: https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/2019-11-14-Fedora-Mate-armhfp-31-1.9-sda.raw.xz-bpi-f2s-sd-emmc.img.txt
readme:https://github.com/BPI-SINOVOIP/BPI-files/blob/master/others/logfile/bpi-f2s/20191114/readme.txt

Mozilla IoT gateway

  • Mozilla IoT rpi gateway 0.10.0 2019-12-25 base on kernel 4.19.37
file name:2019-12-25-rpi-gateway-0.10.0-bpi-f2s.img.zip
google link:https://drive.google.com/file/d/1wPDeqQpKce-I81fQ638HE_ogl-MDkOOB/view?usp=drivesdk
Mozilla gateway getting started guide:https://iot.mozilla.org/docs/gateway-getting-started-guide.html
discuss on forum :http://forum.banana-pi.org/t/bpi-f2s-new-image-mozilla-iot-rpi-gateway-0-10-0-2019-12-25/10455


Yocto Linux

  • this code is support by Tibbo/SunPlus
github link: https://github.com/tibbotech/yocto_layers

Resources

Easy to buy sample

Retrieved from "https://wiki.banana-pi.org/index.php?title=Banana_Pi_BPI-F2S&oldid=11346"